qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Tristan Gingold <gingold@adacore.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 10/19] Add ali1543 super IO pci device.
Date: Mon, 30 Mar 2009 16:36:25 +0200	[thread overview]
Message-ID: <1238423794-25455-11-git-send-email-gingold@adacore.com> (raw)
In-Reply-To: <1238423794-25455-10-git-send-email-gingold@adacore.com>

This is a very partial implementation just enough for es40 firmware.

Signed-off-by: Tristan Gingold <gingold@adacore.com>
---
 hw/ali1543.c |  150 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/pci.h     |    5 ++
 hw/pci_ids.h |    3 +
 3 files changed, 158 insertions(+), 0 deletions(-)
 create mode 100644 hw/ali1543.c

diff --git a/hw/ali1543.c b/hw/ali1543.c
new file mode 100644
index 0000000..c4b0572
--- /dev/null
+++ b/hw/ali1543.c
@@ -0,0 +1,150 @@
+/*
+ * QEMU Ali 1543c emulation
+ *
+ * Copyright (c) 2009 AdaCore
+ *
+ * Written by Tristan Gingold.
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+#include <time.h>
+#include <sys/time.h>
+#include "hw.h"
+#include "net.h"
+#include "sysemu.h"
+#include "devices.h"
+#include "boards.h"
+#include "pc.h"
+#include "isa.h"
+#include "qemu-char.h"
+#include "pci.h"
+
+/* Ali 1543 is a south-bridge super-IO.  It contains a DMA, a PIC, a PIT,
+  a ps/2 kbd interface, 2 IDE controller, 1 USB controller (OHCI), 1 FDC,
+  2 serials ports, 1 parallel port and a PMU.  */
+
+//#define DEBUG_CFG
+
+struct ALI1543State {
+    PCIDevice pci;
+
+    qemu_irq *irq; /* Upstream handler. */
+    PITState *pit;
+    qemu_irq *i8259;
+
+    /* Configuration.  */
+    enum cfg_state { CFG_SNOOP, CFG_51, CFG_EN } cfg_state;
+    unsigned char cfg_index;
+};
+
+static void ali_cfg_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    ALI1543State *ali = opaque;
+
+    if ((addr & 1) == 0) {
+        switch (ali->cfg_state) {
+        case CFG_SNOOP:
+            if (val == 0x51)
+                ali->cfg_state = CFG_51;
+            else
+                qemu_log("ali1543-cfg: write %02x to cfg_port\n", val);
+            break;
+        case CFG_51:
+            if (val == 0x23)
+                ali->cfg_state = CFG_EN;
+            else {
+                qemu_log("ali1543-cfg: write %02x to cfg_port (51)\n", val);
+                ali->cfg_state = CFG_SNOOP;
+            }
+            break;
+        case CFG_EN:
+            ali->cfg_index = val;
+            break;
+        }
+    }
+    else {
+#ifdef DEBUG_CFG
+        qemu_log("ali1543-cfg: write %02x to cfg reg %02x (addr=%x)\n",
+                 val, ali->cfg_index, addr);
+#endif
+    }
+}
+
+static uint32_t ali_cfg_read(void *opaque, uint32_t addr)
+{
+    ALI1543State *ali = opaque;
+    uint32_t res;
+
+    if ((addr & 1) == 0) {
+        if (ali->cfg_state != CFG_EN) {
+            qemu_log("ali1543-cfg: read fromcfg_port\n");
+            res = 0;
+        }
+        else
+            res = ali->cfg_index;
+    }
+    else {
+        switch (ali->cfg_index) {
+        case 0x20:
+            res = 0x43;
+            break;
+        case 0x21:
+            res = 0x15;
+            break;
+        default:
+#ifdef DEBUG_CFG
+            qemu_log("ali1543-cfg: read from reg %02x\n", ali->cfg_index);
+#endif
+            res = 0;
+            break;
+        }
+    }
+    return res;
+}
+
+ALI1543State *ali1543_init (PCIBus *bus, int devfn, qemu_irq irq)
+{
+    ALI1543State *ali;
+    uint8_t *pci_conf;
+
+    ali = (ALI1543State*)pci_register_device(bus, "Ali1543",
+                                             sizeof(ALI1543State),
+                                             devfn, NULL, NULL);
+
+    pci_conf = ali->pci.config;
+
+    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_AL);
+    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_AL_M1533);
+    pci_conf[0x08] = 0xc3; // Revision
+    pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_ISA);
+    pci_conf[0x2c] = 0; // Subsystem
+    pci_conf[0x2d] = 0;
+    pci_conf[0x2e] = 0;
+    pci_conf[0x2f] = 0;
+
+    register_ioport_read(0x370, 2, 1, ali_cfg_read, ali);
+    register_ioport_write(0x370, 2, 1, ali_cfg_write, ali);
+
+    ali->i8259 = i8259_init(irq);
+
+    /* serial_init already handles NULL CharDriverState but this code adds
+       a more useful label.  */
+    if (serial_hds[0] == NULL)
+        serial_hds[0] = qemu_chr_open("com1", "nul", NULL);
+    if (serial_hds[1] == NULL)
+        serial_hds[1] = qemu_chr_open("com2", "nul", NULL);
+
+    serial_init(0x3f8, ali->i8259[4], 115200, serial_hds[0]);
+    serial_init(0x2f8, ali->i8259[3], 115200, serial_hds[1]);
+    ali->pit = pit_init(0x40, ali->i8259[0]);
+    pcspk_init(ali->pit);
+    DMA_init(0);
+
+    return ali;
+}
+
+qemu_irq ali1543_get_irq(ALI1543State *c, int n)
+{
+    return c->i8259[n];
+}
diff --git a/hw/pci.h b/hw/pci.h
index 831f1b1..e4e0738 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -261,4 +261,9 @@ PCIBus *pci_apb_init(target_phys_addr_t special_base,
 PCIBus *sh_pci_register_bus(pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
                             qemu_irq *pic, int devfn_min, int nirq);
 
+/* ali1543.c */
+typedef struct ALI1543State ALI1543State;
+ALI1543State *ali1543_init (PCIBus *bus, int devfn, qemu_irq irq);
+qemu_irq ali1543_get_irq(ALI1543State *c, int n);
+
 #endif
diff --git a/hw/pci_ids.h b/hw/pci_ids.h
index 427fcd5..4119ead 100644
--- a/hw/pci_ids.h
+++ b/hw/pci_ids.h
@@ -70,6 +70,9 @@
 #define PCI_VENDOR_ID_CMD                0x1095
 #define PCI_DEVICE_ID_CMD_646            0x0646
 
+#define PCI_VENDOR_ID_AL                 0x10b9
+#define PCI_DEVICE_ID_AL_M1533           0x1533
+
 #define PCI_VENDOR_ID_REALTEK            0x10ec
 #define PCI_DEVICE_ID_REALTEK_8139       0x8139
 
-- 
1.6.2

  reply	other threads:[~2009-03-30 14:37 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-30 14:36 [Qemu-devel] [PATCH 0/20]: add alpha es40 system emulation (v4) Tristan Gingold
2009-03-30 14:36 ` [Qemu-devel] [PATCH 01/19] Add support for multi-level phys map Tristan Gingold
2009-03-30 14:36   ` [Qemu-devel] [PATCH 02/19] Increase Alpha physical address size to 44 bits Tristan Gingold
2009-03-30 14:36     ` [Qemu-devel] [PATCH 03/19] Alpha: set target page size to 13 bits Tristan Gingold
2009-03-30 14:36       ` [Qemu-devel] [PATCH 04/19] Allow 5 mmu indexes Tristan Gingold
2009-03-30 14:36         ` [Qemu-devel] [PATCH 05/19] Split cpu_mmu_index into cpu_mmu_index_data and cpu_mmu_index_code Tristan Gingold
2009-03-30 14:36           ` [Qemu-devel] [PATCH 06/19] Bug fix alpha: stop translation if too long Tristan Gingold
2009-03-30 14:36             ` [Qemu-devel] [PATCH 07/19] Alpha bug: fix palcode mask for user pal calls Tristan Gingold
2009-03-30 14:36               ` [Qemu-devel] [PATCH 08/19] Alpha: document more registers used by 21264 Tristan Gingold
2009-03-30 14:36                 ` [Qemu-devel] [PATCH 09/19] Add square wave output support Tristan Gingold
2009-03-30 14:36                   ` Tristan Gingold [this message]
2009-03-30 14:36                     ` [Qemu-devel] [PATCH 11/19] Add 21272 chipset (memory and pci controller for alpha) Tristan Gingold
2009-03-30 14:36                       ` [Qemu-devel] [PATCH 12/19] Add target-alpha/machine.c and hw/es40.c for es40 machine emulation Tristan Gingold
2009-03-30 14:36                         ` [Qemu-devel] [PATCH 13/19] Move softmmu_helper.h from exec.h to op_helper.c on alpha Tristan Gingold
2009-03-30 14:36                           ` [Qemu-devel] [PATCH 14/19] alpha ld helpers now directly return the value Tristan Gingold
2009-03-30 14:36                             ` [Qemu-devel] [PATCH 15/19] Add alpha_cpu_list Tristan Gingold
2009-03-30 14:36                               ` [Qemu-devel] [PATCH 16/19] Alpha: lower parent irq when irq is lowered Tristan Gingold
2009-03-30 14:36                                 ` [Qemu-devel] [PATCH 17/19] Move linux-user pal emulation to linux-user/ Tristan Gingold
2009-03-30 14:36                                   ` [Qemu-devel] [PATCH 18/19] Correctly decode hw_ld/hw_st opcodes for all alpha implementations Tristan Gingold
2009-03-30 14:36                                     ` [Qemu-devel] [PATCH 19/19] Add full emulation for 21264 Tristan Gingold
2009-04-07 21:52                                     ` [Qemu-devel] [PATCH 18/19] Correctly decode hw_ld/hw_st opcodes for all alpha implementations Aurelien Jarno
2009-04-08 12:26                                       ` Tristan Gingold
2009-04-15 14:42                                 ` [Qemu-devel] [PATCH 16/19] Alpha: lower parent irq when irq is lowered Aurelien Jarno
2009-04-07 22:29                   ` [Qemu-devel] [PATCH 09/19] Add square wave output support Aurelien Jarno
2009-04-07 22:32                 ` [Qemu-devel] [PATCH 08/19] Alpha: document more registers used by 21264 Aurelien Jarno
2009-04-07 22:31               ` [Qemu-devel] [PATCH 07/19] Alpha bug: fix palcode mask for user pal calls Aurelien Jarno
2009-04-07 21:44             ` [Qemu-devel] [PATCH 06/19] Bug fix alpha: stop translation if too long Aurelien Jarno
2009-04-15 14:30           ` [Qemu-devel] [PATCH 05/19] Split cpu_mmu_index into cpu_mmu_index_data and cpu_mmu_index_code Aurelien Jarno
2009-04-21 12:10             ` Tristan Gingold
2009-04-07 21:48         ` [Qemu-devel] [PATCH 04/19] Allow 5 mmu indexes Aurelien Jarno
2009-04-07 21:47       ` [Qemu-devel] [PATCH 03/19] Alpha: set target page size to 13 bits Aurelien Jarno
2009-04-15 16:23   ` [Qemu-devel] [PATCH 01/19] Add support for multi-level phys map Aurelien Jarno
2009-04-21 12:11     ` Tristan Gingold
2009-03-30 15:46 ` [Qemu-devel] [PATCH 0/20]: add alpha es40 system emulation (v4) Brian Wheeler
2009-03-30 16:04   ` Tristan Gingold
2009-03-30 16:43     ` Brian Wheeler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1238423794-25455-11-git-send-email-gingold@adacore.com \
    --to=gingold@adacore.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).