From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org, xen-devel@lists.xensource.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 07/10] xen: blk & nic configuration via cmd line.
Date: Tue, 21 Apr 2009 14:20:05 +0200 [thread overview]
Message-ID: <1240316408-15949-8-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1240316408-15949-1-git-send-email-kraxel@redhat.com>
This patch makes qemu create backend and frontend device entries in
xenstore for devices configured on the command line. It will use
qdisk and qnic backend names, so the qemu internal backends will
be used.
Disks can be created using -drive if=xen,file=...
Nics can be created using -net nic,macaddr=...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
Makefile.target | 2 +-
hw/xen_backend.c | 1 +
hw/xen_backend.h | 8 +++
hw/xen_devconfig.c | 142 +++++++++++++++++++++++++++++++++++++++++++++++++++
hw/xen_machine_pv.c | 19 +++++++
5 files changed, 171 insertions(+), 1 deletions(-)
create mode 100644 hw/xen_devconfig.c
diff --git a/Makefile.target b/Makefile.target
index 8eeccbb..24d409e 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -561,7 +561,7 @@ LIBS += $(CONFIG_BLUEZ_LIBS)
endif
# xen backend driver support
-XEN_OBJS := xen_machine_pv.o xen_backend.o
+XEN_OBJS := xen_machine_pv.o xen_backend.o xen_devconfig.o
XEN_OBJS += xen_console.o xenfb.o xen_disk.o xen_nic.o
ifeq ($(CONFIG_XEN), yes)
OBJS += $(XEN_OBJS)
diff --git a/hw/xen_backend.c b/hw/xen_backend.c
index c1e3728..2f2ec7f 100644
--- a/hw/xen_backend.c
+++ b/hw/xen_backend.c
@@ -45,6 +45,7 @@
/* public */
int xen_xc;
struct xs_handle *xenstore = NULL;
+const char *xen_protocol;
/* private */
static TAILQ_HEAD(XenDeviceHead, XenDevice) xendevs = TAILQ_HEAD_INITIALIZER(xendevs);
diff --git a/hw/xen_backend.h b/hw/xen_backend.h
index 4e4be14..7f1804e 100644
--- a/hw/xen_backend.h
+++ b/hw/xen_backend.h
@@ -3,6 +3,8 @@
#include "xen_common.h"
#include "sysemu.h"
+#include "net.h"
+#include "block_int.h"
/* ------------------------------------------------------------- */
@@ -56,6 +58,7 @@ struct XenDevice {
/* variables */
extern int xen_xc;
extern struct xs_handle *xenstore;
+extern const char *xen_protocol;
/* xenstore helper functions */
int xenstore_write_str(const char *base, const char *node, const char *val);
@@ -93,4 +96,9 @@ extern struct XenDevOps xen_netdev_ops; /* xen_nic.c */
void xen_init_display(int domid);
+/* configuration (aka xenbus setup) */
+void xen_config_cleanup(void);
+int xen_config_dev_blk(DriveInfo *disk);
+int xen_config_dev_nic(NICInfo *nic);
+
#endif /* QEMU_HW_XEN_BACKEND_H */
diff --git a/hw/xen_devconfig.c b/hw/xen_devconfig.c
new file mode 100644
index 0000000..4420561
--- /dev/null
+++ b/hw/xen_devconfig.c
@@ -0,0 +1,142 @@
+#include "xen_backend.h"
+
+/* ------------------------------------------------------------- */
+
+struct xs_dirs {
+ char *xs_dir;
+ TAILQ_ENTRY(xs_dirs) list;
+};
+static TAILQ_HEAD(xs_dirs_head, xs_dirs) xs_cleanup = TAILQ_HEAD_INITIALIZER(xs_cleanup);
+
+static void xen_config_cleanup_dir(char *dir)
+{
+ struct xs_dirs *d;
+
+ d = qemu_malloc(sizeof(*d));
+ d->xs_dir = dir;
+ TAILQ_INSERT_TAIL(&xs_cleanup, d, list);
+}
+
+void xen_config_cleanup(void)
+{
+ struct xs_dirs *d;
+
+ TAILQ_FOREACH(d, &xs_cleanup, list) {
+ xs_rm(xenstore, 0, d->xs_dir);
+ }
+}
+
+/* ------------------------------------------------------------- */
+
+static int xen_config_dev_mkdir(char *dev, int p)
+{
+ struct xs_permissions perms[2] = {{
+ .id = 0, /* set owner: dom0 */
+ },{
+ .id = xen_domid,
+ .perms = p,
+ }};
+
+ if (!xs_mkdir(xenstore, 0, dev)) {
+ xen_be_printf(NULL, 0, "xs_mkdir %s: failed\n", dev);
+ return -1;
+ }
+ xen_config_cleanup_dir(qemu_strdup(dev));
+
+ if (!xs_set_permissions(xenstore, 0, dev, perms, 2)) {
+ xen_be_printf(NULL, 0, "xs_set_permissions %s: failed\n", dev);
+ return -1;
+ }
+ return 0;
+}
+
+static int xen_config_dev_dirs(const char *ftype, const char *btype, int vdev,
+ char *fe, char *be, int len)
+{
+ char *dom;
+
+ dom = xs_get_domain_path(xenstore, xen_domid);
+ snprintf(fe, len, "%s/device/%s/%d", dom, ftype, vdev);
+ free(dom);
+
+ dom = xs_get_domain_path(xenstore, 0);
+ snprintf(be, len, "%s/backend/%s/%d/%d", dom, btype, xen_domid, vdev);
+ free(dom);
+
+ xen_config_dev_mkdir(fe, XS_PERM_READ | XS_PERM_WRITE);
+ xen_config_dev_mkdir(be, XS_PERM_READ);
+ return 0;
+}
+
+static int xen_config_dev_all(char *fe, char *be)
+{
+ /* frontend */
+ if (xen_protocol)
+ xenstore_write_str(fe, "protocol", xen_protocol);
+
+ xenstore_write_int(fe, "state", XenbusStateInitialising);
+ xenstore_write_int(fe, "backend-id", 0);
+ xenstore_write_str(fe, "backend", be);
+
+ /* backend */
+ xenstore_write_str(be, "domain", qemu_name ? qemu_name : "no-name");
+ xenstore_write_int(be, "online", 1);
+ xenstore_write_int(be, "state", XenbusStateInitialising);
+ xenstore_write_int(be, "frontend-id", xen_domid);
+ xenstore_write_str(be, "frontend", fe);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------- */
+
+int xen_config_dev_blk(DriveInfo *disk)
+{
+ char fe[256], be[256];
+ int vdev = 202 * 256 + 16 * disk->unit;
+ int cdrom = disk->bdrv->type == BDRV_TYPE_CDROM;
+ const char *devtype = cdrom ? "cdrom" : "disk";
+ const char *mode = cdrom ? "r" : "w";
+
+ snprintf(disk->bdrv->device_name, sizeof(disk->bdrv->device_name),
+ "xvd%c", 'a' + disk->unit);
+ xen_be_printf(NULL, 1, "config disk %d [%s]: %s\n",
+ disk->unit, disk->bdrv->device_name, disk->bdrv->filename);
+ xen_config_dev_dirs("vbd", "qdisk", vdev, fe, be, sizeof(fe));
+
+ /* frontend */
+ xenstore_write_int(fe, "virtual-device", vdev);
+ xenstore_write_str(fe, "device-type", devtype);
+
+ /* backend */
+ xenstore_write_str(be, "dev", disk->bdrv->device_name);
+ xenstore_write_str(be, "type", "file");
+ xenstore_write_str(be, "params", disk->bdrv->filename);
+ xenstore_write_str(be, "mode", mode);
+
+ /* common stuff */
+ return xen_config_dev_all(fe, be);
+}
+
+int xen_config_dev_nic(NICInfo *nic)
+{
+ char fe[256], be[256];
+ char mac[20];
+
+ snprintf(mac, sizeof(mac), "%02x:%02x:%02x:%02x:%02x:%02x",
+ nic->macaddr[0], nic->macaddr[1], nic->macaddr[2],
+ nic->macaddr[3], nic->macaddr[4], nic->macaddr[5]);
+ xen_be_printf(NULL, 1, "config nic %d: mac=\"%s\"\n", nic->vlan->id, mac);
+ xen_config_dev_dirs("vif", "qnic", nic->vlan->id, fe, be, sizeof(fe));
+
+ /* frontend */
+ xenstore_write_int(fe, "handle", nic->vlan->id);
+ xenstore_write_str(fe, "mac", mac);
+
+ /* backend */
+ xenstore_write_int(be, "handle", nic->vlan->id);
+ xenstore_write_str(be, "mac", mac);
+
+ /* common stuff */
+ return xen_config_dev_all(fe, be);
+}
diff --git a/hw/xen_machine_pv.c b/hw/xen_machine_pv.c
index c21617a..154cf71 100644
--- a/hw/xen_machine_pv.c
+++ b/hw/xen_machine_pv.c
@@ -39,6 +39,7 @@ static void xen_init_pv(ram_addr_t ram_size, int vga_ram_size,
const char *cpu_model)
{
CPUState *env;
+ int i, index;
/* Initialize a dummy CPU */
if (cpu_model == NULL) {
@@ -62,6 +63,24 @@ static void xen_init_pv(ram_addr_t ram_size, int vga_ram_size,
xen_be_register("qdisk", &xen_blkdev_ops);
xen_be_register("qnic", &xen_netdev_ops);
+ /* configure disks */
+ for (i = 0; i < 16; i++) {
+ index = drive_get_index(IF_XEN, 0, i);
+ if (index == -1)
+ continue;
+ xen_config_dev_blk(drives_table + index);
+ }
+
+ /* configure nics */
+ for (i = 0; i < nb_nics; i++) {
+ if (!nd_table[i].model || 0 != strcmp(nd_table[i].model, "xen"))
+ continue;
+ xen_config_dev_nic(nd_table + i);
+ }
+
+ /* config cleanup hook */
+ atexit(xen_config_cleanup);
+
/* setup framebuffer */
xen_init_display(xen_domid);
}
--
1.6.2.2
next prev parent reply other threads:[~2009-04-21 12:20 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-21 12:19 [Qemu-devel] [PATCH 00/10] xen: pv domain support Gerd Hoffmann
2009-04-21 12:19 ` [Qemu-devel] [PATCH 01/10] xen: groundwork for xen support Gerd Hoffmann
2009-04-21 12:20 ` [Qemu-devel] [PATCH 02/10] xen: backend driver core Gerd Hoffmann
2009-04-21 12:20 ` [Qemu-devel] [PATCH 03/10] xen: add console backend driver Gerd Hoffmann
2009-04-21 15:46 ` Blue Swirl
2009-04-21 12:20 ` [Qemu-devel] [PATCH 04/10] xen: add framebuffer " Gerd Hoffmann
2009-04-21 12:20 ` [Qemu-devel] [PATCH 05/10] xen: add block device " Gerd Hoffmann
2009-04-21 15:47 ` Blue Swirl
2009-04-21 12:20 ` [Qemu-devel] [PATCH 06/10] xen: add net " Gerd Hoffmann
2009-04-21 12:20 ` Gerd Hoffmann [this message]
2009-04-21 12:20 ` [Qemu-devel] [PATCH 08/10] xen: pv domain builder Gerd Hoffmann
2009-04-21 15:48 ` Blue Swirl
2009-04-21 12:20 ` [Qemu-devel] [PATCH 09/10] simplify vga selection Gerd Hoffmann
2009-04-21 12:20 ` [Qemu-devel] [PATCH 10/10] xen: add -vga xenfb option, configure xenfb Gerd Hoffmann
2009-04-21 15:25 ` [Qemu-devel] Re: [Xen-devel] [PATCH 00/10] xen: pv domain support Ian Jackson
2009-04-21 16:16 ` Gerd Hoffmann
2009-05-19 10:54 ` Mark Johnson
2009-05-19 16:04 ` Ian Jackson
2009-04-22 15:52 ` [Qemu-devel] " Anthony Liguori
2009-04-22 16:54 ` [Xen-devel] " Stefano Stabellini
2009-04-23 9:55 ` Gerd Hoffmann
-- strict thread matches above, loose matches on Subject: below --
2009-04-07 14:44 Gerd Hoffmann
2009-04-07 14:44 ` [Qemu-devel] [PATCH 07/10] xen: blk & nic configuration via cmd line Gerd Hoffmann
2009-04-01 21:39 [Qemu-devel] [PATCH 00/10] xen: pv domain support Gerd Hoffmann
2009-04-01 21:39 ` [Qemu-devel] [PATCH 07/10] xen: blk & nic configuration via cmd line Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1240316408-15949-8-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).