From: Zachary Amsden <zamsden@redhat.com>
To: qemu-devel@nongnu.org
Cc: zamsden@redhat.com
Subject: [Qemu-devel] [PATCH 11/14] Add some defined constants for VGA offsets.
Date: Thu, 30 Jul 2009 00:15:09 -1000 [thread overview]
Message-ID: <1248948912-7877-12-git-send-email-zamsden@redhat.com> (raw)
In-Reply-To: <1248948912-7877-11-git-send-email-zamsden@redhat.com>
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
---
hw/cirrus_vga.c | 14 +++++++-------
hw/vga.c | 12 ++++++------
hw/vga_int.h | 4 ++++
hw/vmware_vga.c | 2 +-
4 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index 60c67fe..9623820 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -2002,7 +2002,7 @@ static uint32_t cirrus_vga_mem_readb(void *opaque, target_phys_addr_t addr)
return vga_mem_readb(s, addr);
}
- addr &= 0x1ffff;
+ addr &= VGA_VRAM_MASK;
if (addr < 0x10000) {
/* XXX handle bitblt */
@@ -2078,7 +2078,7 @@ static void cirrus_vga_mem_writeb(void *opaque, target_phys_addr_t addr,
return;
}
- addr &= 0x1ffff;
+ addr &= VGA_VRAM_MASK;
if (addr < 0x10000) {
if (s->cirrus_srcptr != s->cirrus_srcptr_end) {
@@ -2611,7 +2611,7 @@ static void map_linear_vram(CirrusVGAState *s)
s->vga.lfb_vram_mapped = 1;
}
else {
- cpu_register_physical_memory(s->vga.vram_phys, 0x20000, s->vga.vga_io_memory);
+ cpu_register_physical_memory(s->vga.vram_phys, VGA_VRAM_SIZE, s->vga.vga_io_memory);
}
vga_dirty_log_start(&s->vga);
@@ -2622,7 +2622,7 @@ static void unmap_linear_vram(CirrusVGAState *s)
if (s->vga.map_addr && s->vga.lfb_addr && s->vga.lfb_end)
s->vga.map_addr = s->vga.map_size = 0;
- cpu_register_physical_memory(s->vga.vram_phys, 0x20000, s->vga.vga_io_memory);
+ cpu_register_physical_memory(s->vga.vram_phys, VGA_VRAM_SIZE, s->vga.vga_io_memory);
}
/* Compute the memory access functions */
@@ -3195,11 +3195,11 @@ static void cirrus_init_common(CirrusVGAState * s, int device_id, int is_pci)
register_ioport_read(0x3ba, 1, 1, vga_ioport_read, s);
register_ioport_read(0x3da, 1, 1, vga_ioport_read, s);
- s->vga.vram_phys = isa_mem_base + 0xa0000;
+ s->vga.vram_phys = isa_mem_base + VGA_ISA_ADDRESS;
s->vga.vga_io_memory = cpu_register_io_memory(cirrus_vga_mem_read,
cirrus_vga_mem_write, s);
- cpu_register_physical_memory(s->vga.vram_phys, 0x20000, s->vga.vga_io_memory);
- qemu_register_coalesced_mmio(s->vga.vram_phys, 0x20000);
+ cpu_register_physical_memory(s->vga.vram_phys, VGA_VRAM_SIZE, s->vga.vga_io_memory);
+ qemu_register_coalesced_mmio(s->vga.vram_phys, VGA_VRAM_SIZE);
/* I/O handler for LFB */
s->cirrus_linear_io_addr =
diff --git a/hw/vga.c b/hw/vga.c
index 0941962..9fbb489 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -713,7 +713,7 @@ uint32_t vga_mem_readb(void *opaque, target_phys_addr_t addr)
/* convert to VGA memory offset */
memory_map_mode = (s->gr[6] >> 2) & 3;
- addr &= 0x1ffff;
+ addr &= VGA_VRAM_MASK;
switch(memory_map_mode) {
case 0:
break;
@@ -803,7 +803,7 @@ void vga_mem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
#endif
/* convert to VGA memory offset */
memory_map_mode = (s->gr[6] >> 2) & 3;
- addr &= 0x1ffff;
+ addr &= VGA_VRAM_MASK;
switch(memory_map_mode) {
case 0:
break;
@@ -2420,8 +2420,8 @@ void vga_init(VGAState *s, target_phys_addr_t vram_base,
}
vga_io_memory = cpu_register_io_memory(vga_mem_read, vga_mem_write, s);
- cpu_register_physical_memory(vram_base, 0x20000, vga_io_memory);
- qemu_register_coalesced_mmio(vram_base, 0x20000);
+ cpu_register_physical_memory(vram_base, VGA_VRAM_SIZE, vga_io_memory);
+ qemu_register_coalesced_mmio(vram_base, VGA_VRAM_SIZE);
}
int isa_vga_init(void)
@@ -2431,7 +2431,7 @@ int isa_vga_init(void)
s = qemu_mallocz(sizeof(VGAState));
vga_common_init(s, VGA_RAM_SIZE);
- vga_init(s, isa_mem_base + 0xa0000, 0, -1);
+ vga_init(s, isa_mem_base + VGA_ISA_ADDRESS, 0, -1);
s->ds = graphic_console_init(s->update, s->invalidate,
s->screen_dump, s->text_update, s);
@@ -2491,7 +2491,7 @@ int pci_vga_init(PCIBus *bus,
s = &d->vga_state;
vga_common_init(s, VGA_RAM_SIZE);
- vga_init(s, isa_mem_base + 0xa0000, 0, -1);
+ vga_init(s, isa_mem_base + VGA_ISA_ADDRESS, 0, -1);
s->ds = graphic_console_init(s->update, s->invalidate,
s->screen_dump, s->text_update, s);
diff --git a/hw/vga_int.h b/hw/vga_int.h
index bab04c6..d1d0c17 100644
--- a/hw/vga_int.h
+++ b/hw/vga_int.h
@@ -79,6 +79,10 @@
#define CH_ATTR_SIZE (160 * 100)
#define VGA_MAX_HEIGHT 2048
+#define VGA_ISA_ADDRESS 0xa0000
+#define VGA_VRAM_SIZE 0x20000
+#define VGA_VRAM_MASK 0x1ffff
+
struct vga_precise_retrace {
int64_t ticks_per_char;
int64_t total_chars;
diff --git a/hw/vmware_vga.c b/hw/vmware_vga.c
index d81d263..d51fa81 100644
--- a/hw/vmware_vga.c
+++ b/hw/vmware_vga.c
@@ -1130,7 +1130,7 @@ static void vmsvga_init(struct vmsvga_state_s *s, int vga_ram_size)
#ifdef EMBED_STDVGA
vga_common_init((VGAState *) s, vga_ram_size);
- vga_init((VGAState *) s, isa_mem_base + 0xa0000, 0, -1);
+ vga_init((VGAState *) s, isa_mem_base + VGA_ISA_ADDRESS, 0, -1);
#else
s->vram_size = vga_ram_size;
s->vram_offset = qemu_ram_alloc(vga_ram_size);
--
1.6.2.5
next prev parent reply other threads:[~2009-07-30 10:19 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-30 10:14 [Qemu-devel] Various VGA / VNC fixes and cleanups to prep for multiheaded graphics Zachary Amsden
2009-07-30 10:14 ` [Qemu-devel] [PATCH 01/14] Add a configure switch to enable / disable all user targets. I felt compelled to do it for symmetry, mostly it is useful to disable user targets when you don't want to build them Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 02/14] Don't segfault when changing VNC password on an SDL display Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 03/14] When using stdio monitor and VNC display, one can set or clear a VNC password; this should set or turn off VNC authentication as well Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 04/14] Clean up VGA type selection; far too many variables being used to track one state leads to confusion if new variables are added Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 05/14] Change cpu_phys mem callback to use [offset, size) bounds instead of [start, end) Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 06/14] Split VGA ioport init into a helper function Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 07/14] Code motion; make mm VGA init function more like standard vga init function. Add missing vga_reset hook to vga_mm_init Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 08/14] Make VGA vram offset passed into vga_mm_init absolute. Since this is a function of the platform, it makes sense to have it be explicitly known in the platform layer rather than hardcoded inside the vga code Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 09/14] Further transformation: use common vga_init() which allows either I/O port or memory mapped based control Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 10/14] Stash VGA physical address and use it in KVM callbacks. Stash VGA physical pointer in cirrus vga as well Zachary Amsden
2009-07-30 10:15 ` Zachary Amsden [this message]
2009-07-30 10:15 ` [Qemu-devel] [PATCH 12/14] Add a PCI BAR for the VGA ROM which is mapped into cirrus_vga. This makes the cirrus device complete under some X servers which require the V_BIOS mapping Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 13/14] Allow cirrus VGA to be initialized multiple times; only the first init takes the ISA memory region and hardware I/O ports Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 14/14] Atrocious and horrendous patch to demonstrate multiple SDL displays. The multiple SDL displays can be seen on one console, using ctrl-alt-1/2 to switch between them Zachary Amsden
2009-07-30 11:03 ` [Qemu-devel] Re: [PATCH 07/14] Code motion; make mm VGA init function more like standard vga init function. Add missing vga_reset hook to vga_mm_init Jan Kiszka
2009-07-30 11:03 ` [Qemu-devel] Re: [PATCH 05/14] Change cpu_phys mem callback to use [offset, size) bounds instead of [start, end) Jan Kiszka
2009-08-10 19:42 ` [Qemu-devel] " Anthony Liguori
2009-07-30 10:34 ` [Qemu-devel] Various VGA / VNC fixes and cleanups to prep for multiheaded graphics Daniel P. Berrange
2009-07-30 10:35 ` Zachary Amsden
2009-07-30 11:33 ` Paul Brook
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248948912-7877-12-git-send-email-zamsden@redhat.com \
--to=zamsden@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).