From: Zachary Amsden <zamsden@redhat.com>
To: qemu-devel@nongnu.org
Cc: zamsden@redhat.com
Subject: [Qemu-devel] [PATCH 13/14] Allow cirrus VGA to be initialized multiple times; only the first init takes the ISA memory region and hardware I/O ports.
Date: Thu, 30 Jul 2009 00:15:11 -1000 [thread overview]
Message-ID: <1248948912-7877-14-git-send-email-zamsden@redhat.com> (raw)
In-Reply-To: <1248948912-7877-13-git-send-email-zamsden@redhat.com>
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
---
hw/cirrus_vga.c | 37 +++++++++++++++++++++----------------
1 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index d7874f0..c0cf088 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -3153,6 +3153,7 @@ static void cirrus_init_common(CirrusVGAState * s, int device_id, int is_pci)
{
int i;
static int inited;
+ static int idx = 0;
if (!inited) {
inited = 1;
@@ -3181,25 +3182,28 @@ static void cirrus_init_common(CirrusVGAState * s, int device_id, int is_pci)
s->bustype = CIRRUS_BUSTYPE_ISA;
}
- register_ioport_write(0x3c0, 16, 1, vga_ioport_write, s);
+ if (idx == 0) {
+ register_ioport_write(0x3c0, 16, 1, vga_ioport_write, s);
- register_ioport_write(0x3b4, 2, 1, vga_ioport_write, s);
- register_ioport_write(0x3d4, 2, 1, vga_ioport_write, s);
- register_ioport_write(0x3ba, 1, 1, vga_ioport_write, s);
- register_ioport_write(0x3da, 1, 1, vga_ioport_write, s);
+ register_ioport_write(0x3b4, 2, 1, vga_ioport_write, s);
+ register_ioport_write(0x3d4, 2, 1, vga_ioport_write, s);
+ register_ioport_write(0x3ba, 1, 1, vga_ioport_write, s);
+ register_ioport_write(0x3da, 1, 1, vga_ioport_write, s);
- register_ioport_read(0x3c0, 16, 1, vga_ioport_read, s);
+ register_ioport_read(0x3c0, 16, 1, vga_ioport_read, s);
- register_ioport_read(0x3b4, 2, 1, vga_ioport_read, s);
- register_ioport_read(0x3d4, 2, 1, vga_ioport_read, s);
- register_ioport_read(0x3ba, 1, 1, vga_ioport_read, s);
- register_ioport_read(0x3da, 1, 1, vga_ioport_read, s);
+ register_ioport_read(0x3b4, 2, 1, vga_ioport_read, s);
+ register_ioport_read(0x3d4, 2, 1, vga_ioport_read, s);
+ register_ioport_read(0x3ba, 1, 1, vga_ioport_read, s);
+ register_ioport_read(0x3da, 1, 1, vga_ioport_read, s);
+ s->vga.vram_phys = isa_mem_base + VGA_ISA_ADDRESS;
- s->vga.vram_phys = isa_mem_base + VGA_ISA_ADDRESS;
- s->vga.vga_io_memory = cpu_register_io_memory(cirrus_vga_mem_read,
- cirrus_vga_mem_write, s);
- cpu_register_physical_memory(s->vga.vram_phys, VGA_VRAM_SIZE, s->vga.vga_io_memory);
- qemu_register_coalesced_mmio(s->vga.vram_phys, VGA_VRAM_SIZE);
+ s->vga.vga_io_memory = cpu_register_io_memory(cirrus_vga_mem_read,
+ cirrus_vga_mem_write, s);
+ cpu_register_physical_memory(s->vga.vram_phys, VGA_VRAM_SIZE,
+ s->vga.vga_io_memory);
+ qemu_register_coalesced_mmio(s->vga.vram_phys, VGA_VRAM_SIZE);
+ }
/* I/O handler for LFB */
s->cirrus_linear_io_addr =
@@ -3229,7 +3233,8 @@ static void cirrus_init_common(CirrusVGAState * s, int device_id, int is_pci)
qemu_register_reset(cirrus_reset, 0, s);
cirrus_reset(s);
- register_savevm("cirrus_vga", 0, 2, cirrus_vga_save, cirrus_vga_load, s);
+ register_savevm("cirrus_vga", idx, 2, cirrus_vga_save, cirrus_vga_load, s);
+ idx++;
}
/***************************************
--
1.6.2.5
next prev parent reply other threads:[~2009-07-30 10:20 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-30 10:14 [Qemu-devel] Various VGA / VNC fixes and cleanups to prep for multiheaded graphics Zachary Amsden
2009-07-30 10:14 ` [Qemu-devel] [PATCH 01/14] Add a configure switch to enable / disable all user targets. I felt compelled to do it for symmetry, mostly it is useful to disable user targets when you don't want to build them Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 02/14] Don't segfault when changing VNC password on an SDL display Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 03/14] When using stdio monitor and VNC display, one can set or clear a VNC password; this should set or turn off VNC authentication as well Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 04/14] Clean up VGA type selection; far too many variables being used to track one state leads to confusion if new variables are added Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 05/14] Change cpu_phys mem callback to use [offset, size) bounds instead of [start, end) Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 06/14] Split VGA ioport init into a helper function Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 07/14] Code motion; make mm VGA init function more like standard vga init function. Add missing vga_reset hook to vga_mm_init Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 08/14] Make VGA vram offset passed into vga_mm_init absolute. Since this is a function of the platform, it makes sense to have it be explicitly known in the platform layer rather than hardcoded inside the vga code Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 09/14] Further transformation: use common vga_init() which allows either I/O port or memory mapped based control Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 10/14] Stash VGA physical address and use it in KVM callbacks. Stash VGA physical pointer in cirrus vga as well Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 11/14] Add some defined constants for VGA offsets Zachary Amsden
2009-07-30 10:15 ` [Qemu-devel] [PATCH 12/14] Add a PCI BAR for the VGA ROM which is mapped into cirrus_vga. This makes the cirrus device complete under some X servers which require the V_BIOS mapping Zachary Amsden
2009-07-30 10:15 ` Zachary Amsden [this message]
2009-07-30 10:15 ` [Qemu-devel] [PATCH 14/14] Atrocious and horrendous patch to demonstrate multiple SDL displays. The multiple SDL displays can be seen on one console, using ctrl-alt-1/2 to switch between them Zachary Amsden
2009-07-30 11:03 ` [Qemu-devel] Re: [PATCH 07/14] Code motion; make mm VGA init function more like standard vga init function. Add missing vga_reset hook to vga_mm_init Jan Kiszka
2009-07-30 11:03 ` [Qemu-devel] Re: [PATCH 05/14] Change cpu_phys mem callback to use [offset, size) bounds instead of [start, end) Jan Kiszka
2009-08-10 19:42 ` [Qemu-devel] " Anthony Liguori
2009-07-30 10:34 ` [Qemu-devel] Various VGA / VNC fixes and cleanups to prep for multiheaded graphics Daniel P. Berrange
2009-07-30 10:35 ` Zachary Amsden
2009-07-30 11:33 ` Paul Brook
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248948912-7877-14-git-send-email-zamsden@redhat.com \
--to=zamsden@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).