From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 13/24] pci: move unregister from PCIDevice to PCIDeviceInfo
Date: Fri, 25 Sep 2009 21:42:38 +0200 [thread overview]
Message-ID: <1253907769-1067-14-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1253907769-1067-1-git-send-email-kraxel@redhat.com>
One more cleanup while being at it ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/e1000.c | 2 +-
hw/eepro100.c | 5 +++--
hw/lsi53c895a.c | 2 +-
hw/pci.c | 7 +++++--
hw/pci.h | 1 +
hw/pcnet.c | 3 +--
hw/rtl8139.c | 3 +--
hw/virtio-pci.c | 1 -
8 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/hw/e1000.c b/hw/e1000.c
index 95c471c..f123bda 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -1129,7 +1129,6 @@ static int pci_e1000_init(PCIDevice *pci_dev)
qemu_format_nic_info_str(d->vc, macaddr);
register_savevm(info_str, -1, 2, nic_save, nic_load, d);
- d->dev.unregister = pci_e1000_uninit;
qemu_register_reset(e1000_reset, d);
e1000_reset(d);
return 0;
@@ -1139,6 +1138,7 @@ static PCIDeviceInfo e1000_info = {
.qdev.name = "e1000",
.qdev.size = sizeof(E1000State),
.init = pci_e1000_init,
+ .exit = pci_e1000_uninit,
};
static void e1000_register_devices(void)
diff --git a/hw/eepro100.c b/hw/eepro100.c
index d3b7c3d..ea9c338 100644
--- a/hw/eepro100.c
+++ b/hw/eepro100.c
@@ -1733,8 +1733,6 @@ static int nic_init(PCIDevice *pci_dev, uint32_t device)
logout("\n");
- s->dev.unregister = pci_nic_uninit;
-
s->device = device;
pci_reset(s);
@@ -1793,14 +1791,17 @@ static PCIDeviceInfo eepro100_info[] = {
.qdev.name = "i82551",
.qdev.size = sizeof(EEPRO100State),
.init = pci_i82551_init,
+ .exit = pci_nic_uninit,
},{
.qdev.name = "i82557b",
.qdev.size = sizeof(EEPRO100State),
.init = pci_i82557b_init,
+ .exit = pci_nic_uninit,
},{
.qdev.name = "i82559er",
.qdev.size = sizeof(EEPRO100State),
.init = pci_i82559er_init,
+ .exit = pci_nic_uninit,
},{
/* end of list */
}
diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index 7c45391..a4d3a57 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -2174,7 +2174,6 @@ static int lsi_scsi_init(PCIDevice *dev)
s->queue = qemu_malloc(sizeof(lsi_queue));
s->queue_len = 1;
s->active_commands = 0;
- s->dev.unregister = lsi_scsi_uninit;
lsi_soft_reset(s);
@@ -2189,6 +2188,7 @@ static PCIDeviceInfo lsi_info = {
.qdev.alias = "lsi",
.qdev.size = sizeof(LSIState),
.init = lsi_scsi_init,
+ .exit = lsi_scsi_uninit,
};
static void lsi53c895a_register_devices(void)
diff --git a/hw/pci.c b/hw/pci.c
index a6cd630..3221a6c 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -26,6 +26,7 @@
#include "monitor.h"
#include "net.h"
#include "sysemu.h"
+#include "msix.h"
//#define DEBUG_PCI
#ifdef DEBUG_PCI
@@ -402,13 +403,15 @@ static void pci_unregister_io_regions(PCIDevice *pci_dev)
static int pci_unregister_device(DeviceState *dev)
{
PCIDevice *pci_dev = DO_UPCAST(PCIDevice, qdev, dev);
+ PCIDeviceInfo *info = DO_UPCAST(PCIDeviceInfo, qdev, dev->info);
int ret = 0;
- if (pci_dev->unregister)
- ret = pci_dev->unregister(pci_dev);
+ if (info->exit)
+ ret = info->exit(pci_dev);
if (ret)
return ret;
+ msix_uninit(pci_dev);
pci_unregister_io_regions(pci_dev);
qemu_free_irqs(pci_dev->irq);
diff --git a/hw/pci.h b/hw/pci.h
index 0ba7e6c..5e781d8 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -329,6 +329,7 @@ typedef int (*pci_qdev_initfn)(PCIDevice *dev);
typedef struct {
DeviceInfo qdev;
pci_qdev_initfn init;
+ PCIUnregisterFunc *exit;
PCIConfigReadFunc *config_read;
PCIConfigWriteFunc *config_write;
} PCIDeviceInfo;
diff --git a/hw/pcnet.c b/hw/pcnet.c
index ae98a20..ee0c98c 100644
--- a/hw/pcnet.c
+++ b/hw/pcnet.c
@@ -2039,8 +2039,6 @@ static int pci_pcnet_init(PCIDevice *pci_dev)
sizeof(struct pcnet_RMD), sizeof(struct pcnet_TMD));
#endif
- pci_dev->unregister = pci_pcnet_uninit;
-
pci_conf = pci_dev->config;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_AMD);
@@ -2170,6 +2168,7 @@ static PCIDeviceInfo pcnet_info = {
.qdev.name = "pcnet",
.qdev.size = sizeof(PCIPCNetState),
.init = pci_pcnet_init,
+ .exit = pci_pcnet_uninit,
};
static void pcnet_register_devices(void)
diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index 83cb1ff..db9cb5a 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -3443,8 +3443,6 @@ static int pci_rtl8139_init(PCIDevice *dev)
RTL8139State * s = DO_UPCAST(RTL8139State, dev, dev);
uint8_t *pci_conf;
- s->dev.unregister = pci_rtl8139_uninit;
-
pci_conf = s->dev.config;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_REALTEK);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_REALTEK_8139);
@@ -3493,6 +3491,7 @@ static PCIDeviceInfo rtl8139_info = {
.qdev.size = sizeof(RTL8139State),
.qdev.reset = rtl8139_reset,
.init = pci_rtl8139_init,
+ .exit = pci_rtl8139_uninit,
};
static void rtl8139_register_devices(void)
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index bd5a7c4..c6fbaac 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -417,7 +417,6 @@ static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
msix_bar_size(&proxy->pci_dev),
PCI_ADDRESS_SPACE_MEM,
msix_mmio_map);
- proxy->pci_dev.unregister = msix_uninit;
} else
vdev->nvectors = 0;
--
1.6.2.5
next prev parent reply other threads:[~2009-09-25 19:43 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-25 19:42 [Qemu-devel] [PATCH 00/24] qdev: bus management updates Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 01/24] unbreak usb pass-through on linux Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 02/24] allow qdev busses allocations be inplace Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 03/24] switch scsi bus to inplace allocation Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 04/24] switch usb " Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 05/24] switch ide " Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 06/24] inplace allocation for pci, split irq init Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 07/24] convert pci bridge to qdev Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 08/24] piix_pci: kill PIIX3IrqState Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 09/24] qdev: device free fixups Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 10/24] Add exit callback to DeviceInfo Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 11/24] Implement scsi device destruction Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 12/24] pci: use qdev for " Gerd Hoffmann
2009-09-25 19:42 ` Gerd Hoffmann [this message]
2009-09-25 19:42 ` [Qemu-devel] [PATCH 14/24] usb: hook unplug into qdev, cleanups + fixes Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 15/24] switch qemu-config to qemu_error Gerd Hoffmann
2009-09-28 20:40 ` Markus Armbruster
2009-09-29 8:57 ` Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 16/24] qdev hotplug: infrastructure and monitor commands Gerd Hoffmann
2009-09-28 20:32 ` Markus Armbruster
2009-09-29 9:08 ` Gerd Hoffmann
2009-09-29 12:25 ` Markus Armbruster
2009-09-29 13:23 ` Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 17/24] usb: hotplug windup Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 18/24] scsi: " Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 19/24] pci: " Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 20/24] pci: windup acpi-based hotplug Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 21/24] drive cleanup fixes Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 22/24] refactor drive_hot_add Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 23/24] allow if=none for drive_add Gerd Hoffmann
2009-09-25 19:42 ` [Qemu-devel] [PATCH 24/24] store a pointer to QemuOpts in DeviceState, release it when zapping a device Gerd Hoffmann
2009-09-25 20:57 ` [Qemu-devel] [PATCH 00/24] qdev: bus management updates Anthony Liguori
2009-09-28 20:40 ` Markus Armbruster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253907769-1067-14-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).