From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 08/15] scsi: move type from SCSIGenericState to SCSIDevice
Date: Tue, 17 Nov 2009 11:17:44 +0100 [thread overview]
Message-ID: <1258453071-3496-9-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1258453071-3496-1-git-send-email-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/scsi-disk.c | 1 +
hw/scsi-generic.c | 13 ++++++-------
hw/scsi.h | 1 +
3 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index a01a786..25f8eaa 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -957,6 +957,7 @@ static int scsi_disk_initfn(SCSIDevice *dev)
s->cluster_size = 1;
}
s->qdev.blocksize = 512;
+ s->qdev.type = TYPE_DISK;
bdrv_get_geometry(s->dinfo->bdrv, &nb_sectors);
nb_sectors /= s->cluster_size;
if (nb_sectors)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 31b2b7c..7c003b7 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -59,7 +59,6 @@ struct SCSIGenericState
{
SCSIDevice qdev;
DriveInfo *dinfo;
- int type;
int lun;
int driver_status;
uint8_t sensebuf[SCSI_SENSE_BUF_SIZE];
@@ -258,7 +257,7 @@ static void scsi_write_complete(void * opaque, int ret)
}
if (r->req.cmd.buf[0] == MODE_SELECT && r->req.cmd.buf[4] == 12 &&
- s->type == TYPE_TAPE) {
+ s->qdev.type == TYPE_TAPE) {
s->qdev.blocksize = (r->buf[9] << 16) | (r->buf[10] << 8) | r->buf[11];
DPRINTF("block size %d\n", s->blocksize);
}
@@ -481,7 +480,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
SCSIBus *bus;
int ret;
- if (s->type == TYPE_TAPE) {
+ if (s->qdev.type == TYPE_TAPE) {
if (scsi_stream_length(cmd, s->qdev.blocksize, &cmdlen, &len) == -1) {
BADF("Unsupported command length, command %x\n", cmd[0]);
return 0;
@@ -660,9 +659,9 @@ static int scsi_generic_initfn(SCSIDevice *dev)
/* define device state */
s->lun = scsiid.lun;
DPRINTF("LUN %d\n", s->lun);
- s->type = scsiid.scsi_type;
- DPRINTF("device type %d\n", s->type);
- if (s->type == TYPE_TAPE) {
+ s->qdev.type = scsiid.scsi_type;
+ DPRINTF("device type %d\n", s->qdev.type);
+ if (s->qdev.type == TYPE_TAPE) {
s->qdev.blocksize = get_stream_blocksize(s->dinfo->bdrv);
if (s->qdev.blocksize == -1)
s->qdev.blocksize = 0;
@@ -670,7 +669,7 @@ static int scsi_generic_initfn(SCSIDevice *dev)
s->qdev.blocksize = get_blocksize(s->dinfo->bdrv);
/* removable media returns 0 if not present */
if (s->qdev.blocksize <= 0) {
- if (s->type == TYPE_ROM || s->type == TYPE_WORM)
+ if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM)
s->qdev.blocksize = 2048;
else
s->qdev.blocksize = 512;
diff --git a/hw/scsi.h b/hw/scsi.h
index bba88f3..1217bf7 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -38,6 +38,7 @@ struct SCSIDevice
SCSIDeviceInfo *info;
QTAILQ_HEAD(, SCSIRequest) requests;
int blocksize;
+ int type;
};
/* cdrom.c */
--
1.6.2.5
next prev parent reply other threads:[~2009-11-17 10:18 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-17 10:17 [Qemu-devel] [PATCH 00/15] scsi: data structures and cleanups Gerd Hoffmann
2009-11-17 10:17 ` [Qemu-devel] [PATCH 01/15] scsi: add/fix header protection Gerd Hoffmann
2009-11-17 11:11 ` Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 02/15] scsi: create common SCSIRequest structure Gerd Hoffmann
2009-11-17 11:12 ` Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 03/15] scsi: move request lists to QTAILQ Gerd Hoffmann
2009-11-17 11:15 ` Christoph Hellwig
2009-11-17 11:59 ` Paul Brook
2009-11-17 12:39 ` Gerd Hoffmann
2009-11-18 9:44 ` Gerd Hoffmann
2009-11-17 10:17 ` [Qemu-devel] [PATCH 04/15] scsi: add scsi_req_init() Gerd Hoffmann
2009-11-17 11:16 ` Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 05/15] scsi: move scsi command from SCSIGenericReq to SCSIRequest Gerd Hoffmann
2009-11-17 11:17 ` Christoph Hellwig
2009-11-17 11:55 ` Paul Brook
2009-11-17 12:45 ` Gerd Hoffmann
2009-11-17 10:17 ` [Qemu-devel] [PATCH 06/15] scsi: move blocksize from SCSIGenericState to SCSIDevice Gerd Hoffmann
2009-11-17 11:34 ` Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 07/15] scsi: add scsi-defs.h Gerd Hoffmann
2009-11-17 11:35 ` Christoph Hellwig
2009-11-17 10:17 ` Gerd Hoffmann [this message]
2009-11-17 11:36 ` [Qemu-devel] [PATCH 08/15] scsi: move type from SCSIGenericState to SCSIDevice Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 09/15] scsi: move scsi request parsing into generic code Gerd Hoffmann
2009-11-17 11:50 ` Christoph Hellwig
2009-11-17 12:27 ` Paul Brook
2009-11-17 12:51 ` Gerd Hoffmann
2009-11-17 13:43 ` Paul Brook
2009-11-17 10:17 ` [Qemu-devel] [PATCH 10/15] scsi: use command defines in scsi-disk.c Gerd Hoffmann
2009-11-17 11:51 ` Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 11/15] scsi: add xfer mode Gerd Hoffmann
2009-11-17 11:53 ` Christoph Hellwig
2009-11-17 11:58 ` Paul Brook
2009-11-17 10:17 ` [Qemu-devel] [PATCH 12/15] scsi: move sense to SCSIDevice, create SCSISense struct Gerd Hoffmann
2009-11-17 11:54 ` Christoph Hellwig
2009-11-17 12:54 ` Gerd Hoffmann
2009-11-17 10:17 ` [Qemu-devel] [PATCH 13/15] scsi: move dinfo to SCSIDevice Gerd Hoffmann
2009-11-17 12:00 ` Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 14/15] scsi: move status to SCSIRequest Gerd Hoffmann
2009-11-17 12:01 ` Christoph Hellwig
2009-11-17 10:17 ` [Qemu-devel] [PATCH 15/15] scsi: add scsi_req_print() Gerd Hoffmann
2009-11-17 12:02 ` Christoph Hellwig
2009-11-17 12:56 ` Gerd Hoffmann
2009-11-17 13:19 ` [Qemu-devel] Re: [PATCH 00/15] scsi: data structures and cleanups Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258453071-3496-9-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).