From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 13/30] scsi: move dinfo to SCSIDevice
Date: Thu, 26 Nov 2009 15:33:59 +0100 [thread overview]
Message-ID: <1259246056-5389-14-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1259246056-5389-1-git-send-email-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/scsi-disk.c | 63 ++++++++++++++++++++++++++---------------------------
hw/scsi-generic.c | 23 +++++++++----------
hw/scsi.h | 1 +
3 files changed, 43 insertions(+), 44 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 2eac400..2fc6cf9 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -54,7 +54,6 @@ typedef struct SCSIDiskReq {
struct SCSIDiskState
{
SCSIDevice qdev;
- DriveInfo *dinfo;
/* The qemu block layer uses a fixed 512 byte sector size.
This is the number of 512 byte blocks in a single scsi sector. */
int cluster_size;
@@ -160,7 +159,7 @@ static void scsi_read_data(SCSIDevice *d, uint32_t tag)
r->iov.iov_len = n * 512;
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
- r->req.aiocb = bdrv_aio_readv(s->dinfo->bdrv, r->sector, &r->qiov, n,
+ r->req.aiocb = bdrv_aio_readv(s->qdev.dinfo->bdrv, r->sector, &r->qiov, n,
scsi_read_complete, r);
if (r->req.aiocb == NULL)
scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
@@ -171,7 +170,7 @@ static void scsi_read_data(SCSIDevice *d, uint32_t tag)
static int scsi_handle_write_error(SCSIDiskReq *r, int error)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
- BlockInterfaceErrorAction action = drive_get_onerror(s->dinfo->bdrv);
+ BlockInterfaceErrorAction action = drive_get_onerror(s->qdev.dinfo->bdrv);
if (action == BLOCK_ERR_IGNORE)
return 0;
@@ -225,7 +224,7 @@ static void scsi_write_request(SCSIDiskReq *r)
n = r->iov.iov_len / 512;
if (n) {
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
- r->req.aiocb = bdrv_aio_writev(s->dinfo->bdrv, r->sector, &r->qiov, n,
+ r->req.aiocb = bdrv_aio_writev(s->qdev.dinfo->bdrv, r->sector, &r->qiov, n,
scsi_write_complete, r);
if (r->req.aiocb == NULL)
scsi_command_complete(r, CHECK_CONDITION,
@@ -384,7 +383,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
switch (command) {
case TEST_UNIT_READY:
DPRINTF("Test Unit Ready\n");
- if (!bdrv_is_inserted(s->dinfo->bdrv))
+ if (!bdrv_is_inserted(s->qdev.dinfo->bdrv))
goto notready;
break;
case REQUEST_SENSE:
@@ -431,7 +430,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
r->iov.iov_len = 0;
- if (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM) {
+ if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM) {
outbuf[r->iov.iov_len++] = 5;
} else {
outbuf[r->iov.iov_len++] = 0;
@@ -462,7 +461,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
r->iov.iov_len = 0;
/* Supported page codes */
- if (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM) {
+ if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM) {
outbuf[r->iov.iov_len++] = 5;
} else {
outbuf[r->iov.iov_len++] = 0;
@@ -480,14 +479,14 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
{
/* Device identification page, mandatory */
int max_len = 255 - 8;
- int id_len = strlen(bdrv_get_device_name(s->dinfo->bdrv));
+ int id_len = strlen(bdrv_get_device_name(s->qdev.dinfo->bdrv));
if (id_len > max_len)
id_len = max_len;
DPRINTF("Inquiry EVPD[Device identification] "
"buffer size %d\n", len);
r->iov.iov_len = 0;
- if (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM) {
+ if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM) {
outbuf[r->iov.iov_len++] = 5;
} else {
outbuf[r->iov.iov_len++] = 0;
@@ -503,7 +502,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
outbuf[r->iov.iov_len++] = id_len; // length of data following
memcpy(&outbuf[r->iov.iov_len],
- bdrv_get_device_name(s->dinfo->bdrv), id_len);
+ bdrv_get_device_name(s->qdev.dinfo->bdrv), id_len);
r->iov.iov_len += id_len;
}
break;
@@ -543,7 +542,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
if (lun || buf[1] >> 5) {
outbuf[0] = 0x7f; /* LUN not supported */
- } else if (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM) {
+ } else if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM) {
outbuf[0] = 5;
outbuf[1] = 0x80;
memcpy(&outbuf[16], "QEMU CD-ROM ", 16);
@@ -586,12 +585,12 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
memset(p, 0, 4);
outbuf[1] = 0; /* Default media type. */
outbuf[3] = 0; /* Block descriptor length. */
- if (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM ||
- bdrv_is_read_only(s->dinfo->bdrv)) {
+ if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM ||
+ bdrv_is_read_only(s->qdev.dinfo->bdrv)) {
outbuf[2] = 0x80; /* Readonly. */
}
p += 4;
- bdrv_get_geometry(s->dinfo->bdrv, &nb_sectors);
+ bdrv_get_geometry(s->qdev.dinfo->bdrv, &nb_sectors);
if ((~dbd) & nb_sectors) {
nb_sectors /= s->cluster_size;
nb_sectors--;
@@ -616,7 +615,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
p[0] = 4;
p[1] = 0x16;
/* if a geometry hint is available, use it */
- bdrv_get_geometry_hint(s->dinfo->bdrv, &cylinders, &heads, &secs);
+ bdrv_get_geometry_hint(s->qdev.dinfo->bdrv, &cylinders, &heads, &secs);
p[2] = (cylinders >> 16) & 0xff;
p[3] = (cylinders >> 8) & 0xff;
p[4] = cylinders & 0xff;
@@ -650,7 +649,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
p[2] = 5000 >> 8;
p[3] = 5000 & 0xff;
/* if a geometry hint is available, use it */
- bdrv_get_geometry_hint(s->dinfo->bdrv, &cylinders, &heads, &secs);
+ bdrv_get_geometry_hint(s->qdev.dinfo->bdrv, &cylinders, &heads, &secs);
p[4] = heads & 0xff;
p[5] = secs & 0xff;
p[6] = s->cluster_size * 2;
@@ -683,13 +682,13 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
memset(p,0,20);
p[0] = 8;
p[1] = 0x12;
- if (bdrv_enable_write_cache(s->dinfo->bdrv)) {
+ if (bdrv_enable_write_cache(s->qdev.dinfo->bdrv)) {
p[2] = 4; /* WCE */
}
p += 20;
}
if ((page == 0x3f || page == 0x2a)
- && (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM)) {
+ && (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM)) {
/* CD Capabilities and Mechanical Status page. */
p[0] = 0x2a;
p[1] = 0x14;
@@ -700,7 +699,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
p[5] = 0xff; /* CD DA, DA accurate, RW supported,
RW corrected, C2 errors, ISRC,
UPC, Bar code */
- p[6] = 0x2d | (bdrv_is_locked(s->dinfo->bdrv)? 2 : 0);
+ p[6] = 0x2d | (bdrv_is_locked(s->qdev.dinfo->bdrv)? 2 : 0);
/* Locking supported, jumper present, eject, tray */
p[7] = 0; /* no volume & mute control, no
changer */
@@ -726,20 +725,20 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
break;
case START_STOP:
DPRINTF("Start Stop Unit\n");
- if (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM &&
+ if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM &&
(buf[4] & 2))
/* load/eject medium */
- bdrv_eject(s->dinfo->bdrv, !(buf[4] & 1));
+ bdrv_eject(s->qdev.dinfo->bdrv, !(buf[4] & 1));
break;
case ALLOW_MEDIUM_REMOVAL:
DPRINTF("Prevent Allow Medium Removal (prevent = %d)\n", buf[4] & 3);
- bdrv_set_locked(s->dinfo->bdrv, buf[4] & 1);
+ bdrv_set_locked(s->qdev.dinfo->bdrv, buf[4] & 1);
break;
case READ_CAPACITY:
DPRINTF("Read Capacity\n");
/* The normal LEN field for this command is zero. */
memset(outbuf, 0, 8);
- bdrv_get_geometry(s->dinfo->bdrv, &nb_sectors);
+ bdrv_get_geometry(s->qdev.dinfo->bdrv, &nb_sectors);
nb_sectors /= s->cluster_size;
/* Returned value is the address of the last sector. */
if (nb_sectors) {
@@ -785,7 +784,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
break;
case SYNCHRONIZE_CACHE:
DPRINTF("Synchronise cache (sector %" PRId64 ", count %d)\n", lba, len);
- bdrv_flush(s->dinfo->bdrv);
+ bdrv_flush(s->qdev.dinfo->bdrv);
break;
case READ_TOC:
{
@@ -794,7 +793,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
msf = buf[1] & 2;
format = buf[2] & 0xf;
start_track = buf[6];
- bdrv_get_geometry(s->dinfo->bdrv, &nb_sectors);
+ bdrv_get_geometry(s->qdev.dinfo->bdrv, &nb_sectors);
DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
nb_sectors /= s->cluster_size;
switch(format) {
@@ -848,7 +847,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
if ((buf[1] & 31) == 0x10) {
DPRINTF("SAI READ CAPACITY(16)\n");
memset(outbuf, 0, len);
- bdrv_get_geometry(s->dinfo->bdrv, &nb_sectors);
+ bdrv_get_geometry(s->qdev.dinfo->bdrv, &nb_sectors);
nb_sectors /= s->cluster_size;
/* Returned value is the address of the last sector. */
if (nb_sectors) {
@@ -919,7 +918,7 @@ static void scsi_destroy(SCSIDevice *dev)
r = DO_UPCAST(SCSIDiskReq, req, QTAILQ_FIRST(&s->qdev.requests));
scsi_remove_request(r);
}
- drive_uninit(s->dinfo);
+ drive_uninit(s->qdev.dinfo);
}
static int scsi_disk_initfn(SCSIDevice *dev)
@@ -927,24 +926,24 @@ static int scsi_disk_initfn(SCSIDevice *dev)
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
uint64_t nb_sectors;
- if (!s->dinfo || !s->dinfo->bdrv) {
+ if (!s->qdev.dinfo || !s->qdev.dinfo->bdrv) {
qemu_error("scsi-disk: drive property not set\n");
return -1;
}
- if (bdrv_get_type_hint(s->dinfo->bdrv) == BDRV_TYPE_CDROM) {
+ if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM) {
s->cluster_size = 4;
} else {
s->cluster_size = 1;
}
s->qdev.blocksize = 512 * s->cluster_size;
s->qdev.type = TYPE_DISK;
- bdrv_get_geometry(s->dinfo->bdrv, &nb_sectors);
+ bdrv_get_geometry(s->qdev.dinfo->bdrv, &nb_sectors);
nb_sectors /= s->cluster_size;
if (nb_sectors)
nb_sectors--;
s->max_lba = nb_sectors;
- strncpy(s->drive_serial_str, drive_get_serial(s->dinfo->bdrv),
+ strncpy(s->drive_serial_str, drive_get_serial(s->qdev.dinfo->bdrv),
sizeof(s->drive_serial_str));
if (strlen(s->drive_serial_str) == 0)
pstrcpy(s->drive_serial_str, sizeof(s->drive_serial_str), "0");
@@ -964,7 +963,7 @@ static SCSIDeviceInfo scsi_disk_info = {
.cancel_io = scsi_cancel_io,
.get_buf = scsi_get_buf,
.qdev.props = (Property[]) {
- DEFINE_PROP_DRIVE("drive", SCSIDiskState, dinfo),
+ DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.dinfo),
DEFINE_PROP_END_OF_LIST(),
},
};
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 38fb46a..613d5a6 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -58,7 +58,6 @@ typedef struct SCSIGenericReq {
struct SCSIGenericState
{
SCSIDevice qdev;
- DriveInfo *dinfo;
int lun;
int driver_status;
uint8_t sensebuf[SCSI_SENSE_BUF_SIZE];
@@ -215,7 +214,7 @@ static void scsi_read_data(SCSIDevice *d, uint32_t tag)
return;
}
- ret = execute_command(s->dinfo->bdrv, r, SG_DXFER_FROM_DEV, scsi_read_complete);
+ ret = execute_command(s->qdev.dinfo->bdrv, r, SG_DXFER_FROM_DEV, scsi_read_complete);
if (ret == -1) {
scsi_command_complete(r, -EINVAL);
return;
@@ -266,7 +265,7 @@ static int scsi_write_data(SCSIDevice *d, uint32_t tag)
return 0;
}
- ret = execute_command(s->dinfo->bdrv, r, SG_DXFER_TO_DEV, scsi_write_complete);
+ ret = execute_command(s->qdev.dinfo->bdrv, r, SG_DXFER_TO_DEV, scsi_write_complete);
if (ret == -1) {
scsi_command_complete(r, -EINVAL);
return 1;
@@ -360,7 +359,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
free(r->buf);
r->buflen = 0;
r->buf = NULL;
- ret = execute_command(s->dinfo->bdrv, r, SG_DXFER_NONE, scsi_command_complete);
+ ret = execute_command(s->qdev.dinfo->bdrv, r, SG_DXFER_NONE, scsi_command_complete);
if (ret == -1) {
scsi_command_complete(r, -EINVAL);
return 0;
@@ -455,7 +454,7 @@ static void scsi_destroy(SCSIDevice *d)
r = DO_UPCAST(SCSIGenericReq, req, QTAILQ_FIRST(&s->qdev.requests));
scsi_remove_request(r);
}
- drive_uninit(s->dinfo);
+ drive_uninit(s->qdev.dinfo);
}
static int scsi_generic_initfn(SCSIDevice *dev)
@@ -464,26 +463,26 @@ static int scsi_generic_initfn(SCSIDevice *dev)
int sg_version;
struct sg_scsi_id scsiid;
- if (!s->dinfo || !s->dinfo->bdrv) {
+ if (!s->qdev.dinfo || !s->qdev.dinfo->bdrv) {
qemu_error("scsi-generic: drive property not set\n");
return -1;
}
/* check we are really using a /dev/sg* file */
- if (!bdrv_is_sg(s->dinfo->bdrv)) {
+ if (!bdrv_is_sg(s->qdev.dinfo->bdrv)) {
qemu_error("scsi-generic: not /dev/sg*\n");
return -1;
}
/* check we are using a driver managing SG_IO (version 3 and after */
- if (bdrv_ioctl(s->dinfo->bdrv, SG_GET_VERSION_NUM, &sg_version) < 0 ||
+ if (bdrv_ioctl(s->qdev.dinfo->bdrv, SG_GET_VERSION_NUM, &sg_version) < 0 ||
sg_version < 30000) {
qemu_error("scsi-generic: scsi generic interface too old\n");
return -1;
}
/* get LUN of the /dev/sg? */
- if (bdrv_ioctl(s->dinfo->bdrv, SG_GET_SCSI_ID, &scsiid)) {
+ if (bdrv_ioctl(s->qdev.dinfo->bdrv, SG_GET_SCSI_ID, &scsiid)) {
qemu_error("scsi-generic: SG_GET_SCSI_ID ioctl failed\n");
return -1;
}
@@ -494,11 +493,11 @@ static int scsi_generic_initfn(SCSIDevice *dev)
s->qdev.type = scsiid.scsi_type;
DPRINTF("device type %d\n", s->qdev.type);
if (s->qdev.type == TYPE_TAPE) {
- s->qdev.blocksize = get_stream_blocksize(s->dinfo->bdrv);
+ s->qdev.blocksize = get_stream_blocksize(s->qdev.dinfo->bdrv);
if (s->qdev.blocksize == -1)
s->qdev.blocksize = 0;
} else {
- s->qdev.blocksize = get_blocksize(s->dinfo->bdrv);
+ s->qdev.blocksize = get_blocksize(s->qdev.dinfo->bdrv);
/* removable media returns 0 if not present */
if (s->qdev.blocksize <= 0) {
if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM)
@@ -525,7 +524,7 @@ static SCSIDeviceInfo scsi_generic_info = {
.cancel_io = scsi_cancel_io,
.get_buf = scsi_get_buf,
.qdev.props = (Property[]) {
- DEFINE_PROP_DRIVE("drive", SCSIGenericState, dinfo),
+ DEFINE_PROP_DRIVE("drive", SCSIGenericState, qdev.dinfo),
DEFINE_PROP_END_OF_LIST(),
},
};
diff --git a/hw/scsi.h b/hw/scsi.h
index f0aaed5..788c459 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -48,6 +48,7 @@ struct SCSIDevice
{
DeviceState qdev;
uint32_t id;
+ DriveInfo *dinfo;
SCSIDeviceInfo *info;
QTAILQ_HEAD(, SCSIRequest) requests;
int blocksize;
--
1.6.2.5
next prev parent reply other threads:[~2009-11-26 14:35 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-26 14:33 [Qemu-devel] [PATCH 00/30] scsi: data structures and cleanups Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 01/30] scsi: add/fix header protection Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 02/30] scsi: create common SCSIRequest structure Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 03/30] scsi: move request lists to QTAILQ Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 04/30] scsi: move SCSIRequest management to common code Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 05/30] scsi: move scsi command buffer from SCSIGenericReq to SCSIRequest Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 06/30] scsi: move blocksize from SCSIGenericState to SCSIDevice Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 07/30] scsi: add scsi-defs.h Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 08/30] scsi: move type from SCSIGenericState to SCSIDevice Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 09/30] scsi: add request parsing helpers to common code Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 10/30] scsi: use command defines in scsi-disk.c Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 11/30] scsi: add xfer mode Gerd Hoffmann
2009-11-26 14:33 ` [Qemu-devel] [PATCH 12/30] scsi: move sense to SCSIDevice, create SCSISense struct Gerd Hoffmann
2009-11-26 14:33 ` Gerd Hoffmann [this message]
2009-11-26 14:34 ` [Qemu-devel] [PATCH 14/30] scsi: move status to SCSIRequest Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 15/30] scsi: add scsi_req_print() Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 16/30] scsi-disk: restruct emulation: core + TEST_UNIT_READY Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 17/30] scsi-disk: restruct emulation: REQUEST_SENSE Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 18/30] scsi-disk: restruct emulation: INQUIRY Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 19/30] scsi-disk: restruct emulation: RESERVE+RELEASE Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 20/30] scsi-disk: restruct emulation: MODE_SENSE Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 21/30] scsi-disk: restruct emulation: START_STOP Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 22/30] scsi-disk: restruct emulation: ALLOW_MEDIUM_REMOVAL Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 23/30] scsi-disk: restruct emulation: READ_CAPACITY Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 24/30] scsi-disk: restruct emulation: SYNCHRONIZE_CACHE Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 25/30] scsi-disk: restruct emulation: READ_TOC Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 26/30] scsi-disk: restruct emulation: GET_CONFIGURATION Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 27/30] scsi-disk: restruct emulation: SERVICE_ACTION_IN Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 28/30] scsi-disk: restruct emulation: REPORT_LUNS Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 29/30] scsi-disk: restruct emulation: VERIFY Gerd Hoffmann
2009-11-26 14:34 ` [Qemu-devel] [PATCH 30/30] scsi: add read/write 16 commands Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259246056-5389-14-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).