From: Glauber Costa <glommer@redhat.com>
To: qemu-devel@nongnu.org
Cc: aliguori@us.ibm.com, avi@redhat.com
Subject: [Qemu-devel] [PATCH 11/11] remove smp restriction from kvm
Date: Wed, 2 Dec 2009 11:48:22 -0200 [thread overview]
Message-ID: <1259761702-4041-12-git-send-email-glommer@redhat.com> (raw)
In-Reply-To: <1259761702-4041-11-git-send-email-glommer@redhat.com>
We don't support smp without irqchip in kernel, so only abort in
that situation
Signed-off-by: Glauber Costa <glommer@redhat.com>
---
kvm-all.c | 10 +++++-----
kvm.h | 2 ++
target-i386/kvm.c | 7 +++++++
target-ppc/kvm.c | 5 +++++
4 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/kvm-all.c b/kvm-all.c
index 22d84a3..b17bd74 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -427,7 +427,12 @@ static int kvm_create_irqchip(KVMState *s)
return ret;
s->irqchip_in_kernel = 1;
+
#endif
+ if (!kvm_arch_can_smp() && (smp_cpus > 1)) {
+ fprintf(stderr, "No SMP KVM support, use '-smp 1'\n");
+ ret = -EINVAL;
+ }
return ret;
}
@@ -440,11 +445,6 @@ int kvm_init(int smp_cpus)
int ret;
int i;
- if (smp_cpus > 1) {
- fprintf(stderr, "No SMP KVM support, use '-smp 1'\n");
- return -EINVAL;
- }
-
s = qemu_mallocz(sizeof(KVMState));
#ifdef KVM_CAP_SET_GUEST_DEBUG
diff --git a/kvm.h b/kvm.h
index 7b9d8b3..91a4bf4 100644
--- a/kvm.h
+++ b/kvm.h
@@ -101,6 +101,8 @@ int kvm_arch_init_vcpu(CPUState *env);
void kvm_arch_reset_vcpu(CPUState *env);
+int kvm_arch_can_smp(void);
+
#ifdef TARGET_I386
int kvm_set_lapic(CPUState *env, struct kvm_lapic_state *s);
int kvm_get_lapic(CPUState *env, struct kvm_lapic_state *s);
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 65ad2a1..cea0cf1 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -1171,3 +1171,10 @@ int kvm_get_lapic(CPUState *env, struct kvm_lapic_state *s)
return kvm_vcpu_ioctl(env, KVM_GET_LAPIC, s);
}
+
+int kvm_arch_can_smp(void)
+{
+ if (kvm_irqchip_in_kernel())
+ return 1;
+ return 0;
+}
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index d08639b..cfe467f 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -62,6 +62,11 @@ int kvm_arch_set_irq(KVMState *s, int irq, int level, int *status)
return -ENOSYS;
}
+int kvm_arch_can_smp(void)
+{
+ return 0;
+}
+
int kvm_arch_put_registers(CPUState *env)
{
struct kvm_regs regs;
--
1.6.5.2
next prev parent reply other threads:[~2009-12-02 13:48 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-02 13:48 [Qemu-devel] [PATCH 00/11] SMP support in qemu.git Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 01/11] Don't mess with halted state Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 02/11] store thread-specific env information Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 03/11] update halted state on mp_state sync Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 04/11] qemu_flush_work for remote vcpu execution Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 05/11] tell kernel about all registers instead of just mp_state Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 06/11] flush state in migration post_load Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 07/11] Don't call kvm cpu reset on initialization Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 08/11] use cpu_kick instead of direct signalling Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 09/11] Use per-cpu reset handlers Glauber Costa
2009-12-02 13:48 ` [Qemu-devel] [PATCH 10/11] Use __thread where available Glauber Costa
2009-12-02 13:48 ` Glauber Costa [this message]
2009-12-03 12:23 ` [Qemu-devel] Re: [PATCH 11/11] remove smp restriction from kvm Avi Kivity
2009-12-03 12:36 ` Glauber Costa
2009-12-03 12:37 ` Avi Kivity
2009-12-03 12:39 ` Glauber Costa
2009-12-03 12:40 ` Avi Kivity
2009-12-03 12:20 ` [Qemu-devel] Re: [PATCH 04/11] qemu_flush_work for remote vcpu execution Avi Kivity
2009-12-03 12:33 ` Glauber Costa
2009-12-03 12:35 ` Avi Kivity
2009-12-03 12:37 ` Glauber Costa
2009-12-03 12:40 ` Avi Kivity
2009-12-03 14:29 ` Paolo Bonzini
2009-12-03 15:02 ` Glauber Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259761702-4041-12-git-send-email-glommer@redhat.com \
--to=glommer@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=avi@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).