From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 1/6] monitor: Don't check for mon_get_cpu() failure
Date: Wed, 20 Jan 2010 13:07:30 +0100 [thread overview]
Message-ID: <1263989255-13755-2-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1263989255-13755-1-git-send-email-armbru@redhat.com>
mon_get_cpu() can't return null pointer, because it passes its return
value to cpu_synchronize_state() first, which crashes if its argument
is null.
Remove the (pretty cheesy) handling of this non-existing error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
monitor.c | 39 +++------------------------------------
1 files changed, 3 insertions(+), 36 deletions(-)
diff --git a/monitor.c b/monitor.c
index 938eb3b..c22901f 100644
--- a/monitor.c
+++ b/monitor.c
@@ -693,8 +693,6 @@ static void do_info_registers(Monitor *mon)
{
CPUState *env;
env = mon_get_cpu();
- if (!env)
- return;
#ifdef TARGET_I386
cpu_dump_state(env, (FILE *)mon, monitor_fprintf,
X86_DUMP_FPU);
@@ -1128,7 +1126,7 @@ static void memory_dump(Monitor *mon, int count, int format, int wsize,
int flags;
flags = 0;
env = mon_get_cpu();
- if (!env && !is_physical)
+ if (!is_physical)
return;
#ifdef TARGET_I386
if (wsize == 2) {
@@ -1190,8 +1188,6 @@ static void memory_dump(Monitor *mon, int count, int format, int wsize,
cpu_physical_memory_rw(addr, buf, l, 0);
} else {
env = mon_get_cpu();
- if (!env)
- break;
if (cpu_memory_rw_debug(env, addr, buf, l, 0) < 0) {
monitor_printf(mon, " Cannot access memory\n");
break;
@@ -1318,8 +1314,6 @@ static void do_memory_save(Monitor *mon, const QDict *qdict, QObject **ret_data)
uint8_t buf[1024];
env = mon_get_cpu();
- if (!env)
- return;
f = fopen(filename, "wb");
if (!f) {
@@ -1754,8 +1748,6 @@ static void tlb_info(Monitor *mon)
uint32_t pgd, pde, pte;
env = mon_get_cpu();
- if (!env)
- return;
if (!(env->cr[0] & CR0_PG_MASK)) {
monitor_printf(mon, "PG disabled\n");
@@ -1812,8 +1804,6 @@ static void mem_info(Monitor *mon)
uint32_t pgd, pde, pte, start, end;
env = mon_get_cpu();
- if (!env)
- return;
if (!(env->cr[0] & CR0_PG_MASK)) {
monitor_printf(mon, "PG disabled\n");
@@ -2659,8 +2649,6 @@ typedef struct MonitorDef {
static target_long monitor_get_pc (const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return env->eip + env->segs[R_CS].base;
}
#endif
@@ -2672,9 +2660,6 @@ static target_long monitor_get_ccr (const struct MonitorDef *md, int val)
unsigned int u;
int i;
- if (!env)
- return 0;
-
u = 0;
for (i = 0; i < 8; i++)
u |= env->crf[i] << (32 - (4 * i));
@@ -2685,40 +2670,30 @@ static target_long monitor_get_ccr (const struct MonitorDef *md, int val)
static target_long monitor_get_msr (const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return env->msr;
}
static target_long monitor_get_xer (const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return env->xer;
}
static target_long monitor_get_decr (const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return cpu_ppc_load_decr(env);
}
static target_long monitor_get_tbu (const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return cpu_ppc_load_tbu(env);
}
static target_long monitor_get_tbl (const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return cpu_ppc_load_tbl(env);
}
#endif
@@ -2728,8 +2703,6 @@ static target_long monitor_get_tbl (const struct MonitorDef *md, int val)
static target_long monitor_get_psr (const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return GET_PSR(env);
}
#endif
@@ -2737,8 +2710,6 @@ static target_long monitor_get_psr (const struct MonitorDef *md, int val)
static target_long monitor_get_reg(const struct MonitorDef *md, int val)
{
CPUState *env = mon_get_cpu();
- if (!env)
- return 0;
return env->regwptr[val];
}
#endif
@@ -2990,7 +2961,7 @@ static void expr_error(Monitor *mon, const char *msg)
longjmp(expr_env, 1);
}
-/* return 0 if OK, -1 if not found, -2 if no CPU defined */
+/* return 0 if OK, -1 if not found */
static int get_monitor_def(target_long *pval, const char *name)
{
const MonitorDef *md;
@@ -3002,8 +2973,6 @@ static int get_monitor_def(target_long *pval, const char *name)
*pval = md->get_value(md, md->offset);
} else {
CPUState *env = mon_get_cpu();
- if (!env)
- return -2;
ptr = (uint8_t *)env + md->offset;
switch(md->type) {
case MD_I32:
@@ -3090,10 +3059,8 @@ static int64_t expr_unary(Monitor *mon)
pch++;
*q = 0;
ret = get_monitor_def(®, buf);
- if (ret == -1)
+ if (ret < 0)
expr_error(mon, "unknown register");
- else if (ret == -2)
- expr_error(mon, "no cpu defined");
n = reg;
}
break;
--
1.6.6
next prev parent reply other threads:[~2010-01-20 12:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-20 12:07 [Qemu-devel] [PATCH v2 0/6] Convert memsave, pmemsave, cpu to QObject+QError Markus Armbruster
2010-01-20 12:07 ` Markus Armbruster [this message]
2010-01-26 21:34 ` [Qemu-devel] [PATCH v2 1/6] monitor: Don't check for mon_get_cpu() failure Anthony Liguori
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 2/6] QError: New QERR_OPEN_FILE_FAILED Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 3/6] monitor: convert do_memory_save() to QError Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 4/6] monitor: convert do_physical_memory_save() " Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 5/6] QError: New QERR_INVALID_CPU_INDEX Markus Armbruster
2010-01-20 12:07 ` [Qemu-devel] [PATCH v2 6/6] monitor: convert do_cpu_set() to QObject, QError Markus Armbruster
2010-01-26 21:23 ` Anthony Liguori
2010-01-27 8:00 ` Markus Armbruster
2010-01-28 22:50 ` Anthony Liguori
2010-01-20 13:24 ` [Qemu-devel] [PATCH v2 0/6] Convert memsave, pmemsave, cpu to QObject+QError Luiz Capitulino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263989255-13755-2-git-send-email-armbru@redhat.com \
--to=armbru@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).