qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Anthony Liguori <aliguori@us.ibm.com>
To: qemu-devel@nongnu.org
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PATCH 15/17] virtio-9p: Use little endian format on virtio
Date: Wed,  3 Mar 2010 13:01:12 -0600	[thread overview]
Message-ID: <1267642874-15001-17-git-send-email-aliguori@us.ibm.com> (raw)
In-Reply-To: <1267642874-15001-1-git-send-email-aliguori@us.ibm.com>

From: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

We need to use platform independent data format as
part of protocol data. 9P uses little endian format
on wire

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 hw/virtio-9p.c |   34 +++++++++++++++++++++++-----------
 1 files changed, 23 insertions(+), 11 deletions(-)

diff --git a/hw/virtio-9p.c b/hw/virtio-9p.c
index 97fcb8a..65f5827 100644
--- a/hw/virtio-9p.c
+++ b/hw/virtio-9p.c
@@ -425,23 +425,32 @@ static size_t pdu_unmarshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
     for (i = 0; fmt[i]; i++) {
 	switch (fmt[i]) {
 	case 'b': {
-	    int8_t *valp = va_arg(ap, int8_t *);
+	    uint8_t *valp = va_arg(ap, uint8_t *);
 	    offset += pdu_unpack(valp, pdu, offset, sizeof(*valp));
 	    break;
 	}
 	case 'w': {
-	    int16_t *valp = va_arg(ap, int16_t *);
-	    offset += pdu_unpack(valp, pdu, offset, sizeof(*valp));
+	    uint16_t val, *valp;
+	    valp = va_arg(ap, uint16_t *);
+	    val = le16_to_cpupu(valp);
+	    offset += pdu_unpack(&val, pdu, offset, sizeof(val));
+	    *valp = val;
 	    break;
 	}
 	case 'd': {
-	    int32_t *valp = va_arg(ap, int32_t *);
-	    offset += pdu_unpack(valp, pdu, offset, sizeof(*valp));
+	    uint32_t val, *valp;
+	    valp = va_arg(ap, uint32_t *);
+	    val = le32_to_cpupu(valp);
+	    offset += pdu_unpack(&val, pdu, offset, sizeof(val));
+	    *valp = val;
 	    break;
 	}
 	case 'q': {
-	    int64_t *valp = va_arg(ap, int64_t *);
-	    offset += pdu_unpack(valp, pdu, offset, sizeof(*valp));
+	    uint64_t val, *valp;
+	    valp = va_arg(ap, uint64_t *);
+	    val = le64_to_cpup(valp);
+	    offset += pdu_unpack(&val, pdu, offset, sizeof(val));
+	    *valp = val;
 	    break;
 	}
 	case 'v': {
@@ -497,22 +506,25 @@ static size_t pdu_marshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
     for (i = 0; fmt[i]; i++) {
 	switch (fmt[i]) {
 	case 'b': {
-	    int8_t val = va_arg(ap, int);
+	    uint8_t val = va_arg(ap, int);
 	    offset += pdu_pack(pdu, offset, &val, sizeof(val));
 	    break;
 	}
 	case 'w': {
-	    int16_t val = va_arg(ap, int);
+	    uint16_t val;
+	    cpu_to_le16w(&val, va_arg(ap, int));
 	    offset += pdu_pack(pdu, offset, &val, sizeof(val));
 	    break;
 	}
 	case 'd': {
-	    int32_t val = va_arg(ap, int);
+	    uint32_t val;
+	    cpu_to_le32w(&val, va_arg(ap, uint32_t));
 	    offset += pdu_pack(pdu, offset, &val, sizeof(val));
 	    break;
 	}
 	case 'q': {
-	    int64_t val = va_arg(ap, int64_t);
+	    uint64_t val;
+	    cpu_to_le64w(&val, va_arg(ap, uint64_t));
 	    offset += pdu_pack(pdu, offset, &val, sizeof(val));
 	    break;
 	}
-- 
1.6.5.2

  parent reply	other threads:[~2010-03-03 19:02 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-03 19:00 [Qemu-devel] [PATCH 00/17][RFC] virtio-9p: paravirtual filesystem passthrough Anthony Liguori
2010-03-03 19:00 ` Anthony Liguori
2010-03-03 19:00 ` [Qemu-devel] [PATCH 01/17] vitio-9p: Add a virtio 9p device to qemu Anthony Liguori
2010-03-03 19:00 ` [Qemu-devel] [PATCH 02/17] vrtio-9p: Implement P9_TVERSION for 9P Anthony Liguori
2010-03-04  9:23   ` [Qemu-devel] " Michael S. Tsirkin
2010-03-04 14:30     ` Aneesh Kumar K. V
2010-03-03 19:01 ` [Qemu-devel] [PATCH 03/17] virtio-9p: Implement P9_TATTACH Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 04/17] virtio-9p: Implement P9_TSTAT Anthony Liguori
2010-03-03 20:35   ` malc
2010-03-04 14:15     ` Aneesh Kumar K. V
2010-03-09  2:08       ` jvrao
2010-03-09 12:30         ` Paul Brook
2010-03-09 14:35           ` Aneesh Kumar K. V
2010-03-09 15:59           ` jvrao
2010-03-11 16:37             ` Paul Brook
2010-03-03 19:01 ` [Qemu-devel] [PATCH 05/17] virtio-9p: Implement P9_TWALK Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 06/17] virtio-9p: Implement P9_TOPEN Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 07/17] virtio-9p: Implement P9_TREAD Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 08/17] virtio-9p: Implement P9_TCLUNK Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 09/17] virtio-9p: Implement P9_TWRITE Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 10/17] virtio-9p: Implement P9_TCREATE Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 11/17] virtio-9p: Implement P9_TWSTAT Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 12/17] virtio-9p: Implement P9_TREMOVE Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 13/17] virtio-9p: Implement P9_TFLUSH Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 14/17] virtio-9p: Add multiple mount point support Anthony Liguori
2010-03-03 19:01 ` Anthony Liguori [this message]
2010-03-03 19:01 ` [Qemu-devel] [PATCH 16/17] virtio-9p: Add support for hardlink Anthony Liguori
2010-03-03 19:01 ` [Qemu-devel] [PATCH 17/17] Implement sync support in 9p server Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1267642874-15001-17-git-send-email-aliguori@us.ibm.com \
    --to=aliguori@us.ibm.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).