qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: ericvh@gmail.com, aliguori@us.ibm.com, jvrao@linux.vnet.ibm.com,
	aneesh.kumar@linux.vnet.ibm.com,
	Gautham R Shenoy <ego@in.ibm.com>
Subject: [Qemu-devel] [PATCH -V6 01/21] virtio-9p: Create a commandline option -fsdev
Date: Thu, 29 Apr 2010 17:44:43 +0530	[thread overview]
Message-ID: <1272543303-9830-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1272543303-9830-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>

From: Gautham R Shenoy <ego@in.ibm.com>

This patch creates a new command line option named -fsdev to hold any file
system specific information.

The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id:     Identifier used to refer to this fsdev
path:   The path on the host that is identified by this fsdev.

[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 Makefile.objs      |    5 +++-
 configure          |    1 +
 fsdev/qemu-fsdev.c |   70 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 fsdev/qemu-fsdev.h |   53 +++++++++++++++++++++++++++++++++++++++
 hw/file-op-9p.h    |   32 +++++++++++++++++++++++
 qemu-config.c      |   18 +++++++++++++
 qemu-config.h      |    3 ++
 qemu-options.hx    |   34 +++++++++++++++++++++++++
 vl.c               |   27 ++++++++++++++++++++
 9 files changed, 242 insertions(+), 1 deletions(-)
 create mode 100644 fsdev/qemu-fsdev.c
 create mode 100644 fsdev/qemu-fsdev.h
 create mode 100644 hw/file-op-9p.h

diff --git a/Makefile.objs b/Makefile.objs
index 1c7c64b..fcfd20f 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -35,6 +35,9 @@ net-nested-$(CONFIG_SLIRP) += slirp.o
 net-nested-$(CONFIG_VDE) += vde.o
 net-obj-y += $(addprefix net/, $(net-nested-y))
 
+fsdev-nested-$(CONFIG_LINUX) = qemu-fsdev.o
+fsdev-obj-$(CONFIG_LINUX) += $(addprefix fsdev/, $(fsdev-nested-y))
+
 ######################################################################
 # libqemu_common.a: Target independent part of system emulation. The
 # long term path is to suppress *all* target specific code in case of
@@ -44,8 +47,8 @@ net-obj-y += $(addprefix net/, $(net-nested-y))
 common-obj-y = $(block-obj-y)
 common-obj-y += $(net-obj-y)
 common-obj-y += $(qobject-obj-y)
+common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
 common-obj-y += readline.o console.o async.o qemu-error.o
-
 common-obj-y += tcg-runtime.o host-utils.o
 common-obj-y += irq.o ioport.o input.o
 common-obj-$(CONFIG_PTIMER) += ptimer.o
diff --git a/configure b/configure
index 172b7cf..87942f4 100755
--- a/configure
+++ b/configure
@@ -2757,6 +2757,7 @@ done # for target in $targets
 if test "$source_path_used" = "yes" ; then
     DIRS="tests tests/cris slirp audio block net pc-bios/optionrom"
     DIRS="$DIRS roms/seabios roms/vgabios"
+    DIRS="$DIRS fsdev"
     FILES="Makefile tests/Makefile"
     FILES="$FILES tests/cris/Makefile tests/cris/.gdbinit"
     FILES="$FILES tests/test-mmap.c"
diff --git a/fsdev/qemu-fsdev.c b/fsdev/qemu-fsdev.c
new file mode 100644
index 0000000..48bbfd9
--- /dev/null
+++ b/fsdev/qemu-fsdev.c
@@ -0,0 +1,70 @@
+/*
+ * Virtio 9p
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ *  Gautham R Shenoy <ego@in.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "qemu-fsdev.h"
+#include "qemu-queue.h"
+#include "osdep.h"
+#include "qemu-common.h"
+
+static QTAILQ_HEAD(FsTypeEntry_head, FsTypeListEntry) fstype_entries =
+    QTAILQ_HEAD_INITIALIZER(fstype_entries);
+
+static FsTypeTable FsTypes[] = {
+    { .name = "local", .ops = NULL},
+};
+
+int qemu_fsdev_add(QemuOpts *opts)
+{
+    struct FsTypeListEntry *fsle;
+    int i;
+
+    if (qemu_opts_id(opts) == NULL) {
+        fprintf(stderr, "fsdev: No id specified\n");
+        return -1;
+    }
+
+     for (i = 0; i < ARRAY_SIZE(FsTypes); i++) {
+        if (strcmp(FsTypes[i].name, qemu_opt_get(opts, "fstype")) == 0) {
+            break;
+        }
+    }
+
+    if (i == ARRAY_SIZE(FsTypes)) {
+        fprintf(stderr, "fsdev: fstype %s not found\n",
+                    qemu_opt_get(opts, "fstype"));
+        return -1;
+    }
+
+    fsle = qemu_malloc(sizeof(*fsle));
+
+    fsle->fse.fsdev_id = qemu_strdup(qemu_opts_id(opts));
+    fsle->fse.path = qemu_strdup(qemu_opt_get(opts, "path"));
+    fsle->fse.ops = FsTypes[i].ops;
+
+    QTAILQ_INSERT_TAIL(&fstype_entries, fsle, next);
+    return 0;
+
+}
+
+FsTypeEntry *get_fsdev_fsentry(char *id)
+{
+    struct FsTypeListEntry *fsle;
+
+    QTAILQ_FOREACH(fsle, &fstype_entries, next) {
+        if (strcmp(fsle->fse.fsdev_id, id) == 0) {
+            return &fsle->fse;
+        }
+    }
+    return NULL;
+}
diff --git a/fsdev/qemu-fsdev.h b/fsdev/qemu-fsdev.h
new file mode 100644
index 0000000..7fa4f60
--- /dev/null
+++ b/fsdev/qemu-fsdev.h
@@ -0,0 +1,53 @@
+/*
+ * Virtio 9p
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ *  Gautham R Shenoy <ego@in.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#ifndef QEMU_FSDEV_H
+#define QEMU_FSDEV_H
+#include "qemu-option.h"
+#include "hw/file-op-9p.h"
+
+
+/*
+ * A table to store the various file systems and their callback operations.
+ * -----------------
+ * fstype | ops
+ * -----------------
+ *  local | local_ops
+ *  .     |
+ *  .     |
+ *  .     |
+ *  .     |
+ * -----------------
+ *  etc
+ */
+typedef struct FsTypeTable {
+    const char *name;
+    FileOperations *ops;
+} FsTypeTable;
+
+/*
+ * Structure to store the various fsdev's passed through command line.
+ */
+typedef struct FsTypeEntry {
+    char *fsdev_id;
+    char *path;
+    FileOperations *ops;
+} FsTypeEntry;
+
+typedef struct FsTypeListEntry {
+    FsTypeEntry fse;
+    QTAILQ_ENTRY(FsTypeListEntry) next;
+} FsTypeListEntry;
+
+extern int qemu_fsdev_add(QemuOpts *opts);
+extern FsTypeEntry *get_fsdev_fsentry(char *id);
+#endif
diff --git a/hw/file-op-9p.h b/hw/file-op-9p.h
new file mode 100644
index 0000000..7cde63c
--- /dev/null
+++ b/hw/file-op-9p.h
@@ -0,0 +1,32 @@
+/*
+ * Virtio 9p
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ *  Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#ifndef _FILEOP_H
+#define _FILEOP_H
+#include <sys/types.h>
+#include <dirent.h>
+#include <sys/time.h>
+#include <utime.h>
+#include <sys/stat.h>
+#include <sys/uio.h>
+
+typedef struct FsContext
+{
+    char *fs_root;
+    uid_t uid;
+} FsContext;
+
+typedef struct FileOperations
+{
+    void *opaque;
+} FileOperations;
+#endif
diff --git a/qemu-config.c b/qemu-config.c
index 9f0f143..cda5060 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -151,6 +151,24 @@ QemuOptsList qemu_chardev_opts = {
     },
 };
 
+#ifdef CONFIG_LINUX
+QemuOptsList qemu_fsdev_opts = {
+    .name = "fsdev",
+    .implied_opt_name = "fstype",
+    .head = QTAILQ_HEAD_INITIALIZER(qemu_fsdev_opts.head),
+    .desc = {
+        {
+            .name = "fstype",
+            .type = QEMU_OPT_STRING,
+        }, {
+            .name = "path",
+            .type = QEMU_OPT_STRING,
+        },
+        { /*End of list */ }
+    },
+};
+#endif
+
 QemuOptsList qemu_device_opts = {
     .name = "device",
     .implied_opt_name = "driver",
diff --git a/qemu-config.h b/qemu-config.h
index dd299c2..5f34803 100644
--- a/qemu-config.h
+++ b/qemu-config.h
@@ -3,6 +3,9 @@
 
 extern QemuOptsList qemu_drive_opts;
 extern QemuOptsList qemu_chardev_opts;
+#ifdef CONFIG_LINUX
+extern QemuOptsList qemu_fsdev_opts;
+#endif
 extern QemuOptsList qemu_device_opts;
 extern QemuOptsList qemu_netdev_opts;
 extern QemuOptsList qemu_net_opts;
diff --git a/qemu-options.hx b/qemu-options.hx
index 83b54c3..e754ba1 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -478,6 +478,40 @@ To get a help on possible @var{driver}s, @var{option}s or @var{value}s, use
 @code{-device @var{driver},@var{option}=?}. 
 ETEXI
 
+#ifdef CONFIG_LINUX
+DEFHEADING(File system options:)
+
+DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
+    "-fsdev local,id=id,path=path\n",
+    QEMU_ARCH_ALL)
+
+STEXI
+
+The general form of a File system device option is:
+@table @option
+
+@item -fsdev @var{fstype} ,id=@var{id} [,@var{options}]
+@findex -fsdev
+Fstype is one of:
+@option{local},
+The specific Fstype will determine the applicable options.
+
+Options to each backend are described below.
+
+@item -fsdev local ,id=@var{id} ,path=@var{path}
+
+Create a file-system-"device" for local-filesystem.
+
+@option{local} is only available on Linux.
+
+@option{path} specifies the path to be exported. @option{path} is required.
+
+@end table
+ETEXI
+#endif
+
+DEFHEADING()
+
 DEF("name", HAS_ARG, QEMU_OPTION_name,
     "-name string1[,process=string2]\n"
     "                set the name of the guest\n"
diff --git a/vl.c b/vl.c
index a485c58..287179c 100644
--- a/vl.c
+++ b/vl.c
@@ -149,6 +149,9 @@ int main(int argc, char **argv)
 #include "qemu-option.h"
 #include "qemu-config.h"
 #include "qemu-objects.h"
+#ifdef CONFIG_LINUX
+#include "fsdev/qemu-fsdev.h"
+#endif
 
 #include "disas.h"
 
@@ -2303,6 +2306,16 @@ static int chardev_init_func(QemuOpts *opts, void *opaque)
     return 0;
 }
 
+#ifdef CONFIG_LINUX
+static int fsdev_init_func(QemuOpts *opts, void *opaque)
+{
+    int ret;
+    ret = qemu_fsdev_add(opts);
+
+    return ret;
+}
+#endif
+
 static int mon_init_func(QemuOpts *opts, void *opaque)
 {
     CharDriverState *chr;
@@ -3074,6 +3087,15 @@ int main(int argc, char **argv, char **envp)
                     exit(1);
                 }
                 break;
+#ifdef CONFIG_LINUX
+            case QEMU_OPTION_fsdev:
+                opts = qemu_opts_parse(&qemu_fsdev_opts, optarg, 1);
+                if (!opts) {
+                    fprintf(stderr, "parse error: %s\n", optarg);
+                    exit(1);
+                }
+                break;
+#endif
             case QEMU_OPTION_serial:
                 add_device_config(DEV_SERIAL, optarg);
                 default_serial = 0;
@@ -3430,6 +3452,11 @@ int main(int argc, char **argv, char **envp)
 
     if (qemu_opts_foreach(&qemu_chardev_opts, chardev_init_func, NULL, 1) != 0)
         exit(1);
+#ifdef CONFIG_LINUX
+    if (qemu_opts_foreach(&qemu_fsdev_opts, fsdev_init_func, NULL, 1) != 0) {
+        exit(1);
+    }
+#endif
 
 #ifndef _WIN32
     if (daemonize) {
-- 
1.7.0.4.360.g11766c

  reply	other threads:[~2010-04-29 12:15 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-29 12:14 [Qemu-devel] [PATCH -V6 00/21] virtio-9p: paravirtual file system passthrough Aneesh Kumar K.V
2010-04-29 12:14 ` Aneesh Kumar K.V [this message]
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 02/21] virtio-9p: Add a virtio 9p device to qemu Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 03/21] virtio-9p: pdu processing support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 04/21] virtio-9p: Add string manipulation support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 05/21] virtio-9p: Add minimal set of FileOperations Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 06/21] virtio-9p: Add fid and qid management support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 07/21] virtio-9p: Add stat and mode related helper functions Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 08/21] virtio-9p: Add sg " Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 09/21] virtio-9p: Add P9_TVERSION support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 10/21] virtio-9p: Add P9_TATTACH support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 11/21] virtio-9p: Add P9_TSTAT support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 12/21] virtio-9p: Add P9_TWALK support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 13/21] virtio-9p: Add P9_TOPEN support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 14/21] virtio-9p: Add P9_TREAD support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 15/21] virtio-9p: Add P9_TCLUNK support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 16/21] virtio-9p: Add P9_TWRITE support Aneesh Kumar K.V
2010-04-29 12:14 ` [Qemu-devel] [PATCH -V6 17/21] virtio-9p: Add P9_TCREATE support Aneesh Kumar K.V
2010-04-29 12:15 ` [Qemu-devel] [PATCH -V6 18/21] virtio-9p: Add P9_TWSTAT support Aneesh Kumar K.V
2010-04-29 12:15 ` [Qemu-devel] [PATCH -V6 19/21] virtio-9p: Add P9_TREMOVE support Aneesh Kumar K.V
2010-04-29 12:15 ` [Qemu-devel] [PATCH -V6 20/21] virtio-9p: Add P9_TFLUSH support Aneesh Kumar K.V
2010-04-29 12:15 ` [Qemu-devel] [PATCH -V6 21/21] virtio-9p: Create a syntactic shortcut for the file-system pass-thru Aneesh Kumar K.V
2010-05-03 17:29 ` [Qemu-devel] [PATCH -V6 00/21] virtio-9p: paravirtual file system passthrough Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1272543303-9830-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
    --to=aneesh.kumar@linux.vnet.ibm.com \
    --cc=aliguori@us.ibm.com \
    --cc=ego@in.ibm.com \
    --cc=ericvh@gmail.com \
    --cc=jvrao@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).