From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: agraf@suse.de, aurelien@aurel32.net
Subject: [Qemu-devel] [PATCH 25/35] tcg-s390: Use the MULTIPLY IMMEDIATE instructions.
Date: Fri, 4 Jun 2010 12:14:33 -0700 [thread overview]
Message-ID: <1275678883-7082-26-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1275678883-7082-1-git-send-email-rth@twiddle.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
tcg/s390/tcg-target.c | 43 +++++++++++++++++++++++++++++++++++++++----
1 files changed, 39 insertions(+), 4 deletions(-)
diff --git a/tcg/s390/tcg-target.c b/tcg/s390/tcg-target.c
index 5446591..f1e00e9 100644
--- a/tcg/s390/tcg-target.c
+++ b/tcg/s390/tcg-target.c
@@ -36,6 +36,7 @@
#define TCG_CT_CONST_32 0x0100
#define TCG_CT_CONST_NEG 0x0200
#define TCG_CT_CONST_ADDI 0x0400
+#define TCG_CT_CONST_MULI 0x8000
#define TCG_CT_CONST_ANDI 0x1000
#define TCG_CT_CONST_ORI 0x2000
#define TCG_CT_CONST_XORI 0x4000
@@ -64,6 +65,8 @@ typedef enum S390Opcode {
RIL_LGFI = 0xc001,
RIL_LLIHF = 0xc00e,
RIL_LLILF = 0xc00f,
+ RIL_MSFI = 0xc201,
+ RIL_MSGFI = 0xc200,
RIL_NIHF = 0xc00a,
RIL_NILF = 0xc00b,
RIL_OIHF = 0xc00c,
@@ -83,6 +86,8 @@ typedef enum S390Opcode {
RI_LLIHL = 0xa50d,
RI_LLILH = 0xa50e,
RI_LLILL = 0xa50f,
+ RI_MGHI = 0xa70d,
+ RI_MHI = 0xa70c,
RI_NIHH = 0xa504,
RI_NIHL = 0xa505,
RI_NILH = 0xa506,
@@ -336,6 +341,10 @@ static int target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
ct->ct &= ~TCG_CT_REG;
ct->ct |= TCG_CT_CONST_ADDI;
break;
+ case 'K':
+ ct->ct &= ~TCG_CT_REG;
+ ct->ct |= TCG_CT_CONST_MULI;
+ break;
case 'A':
ct->ct &= ~TCG_CT_REG;
ct->ct |= TCG_CT_CONST_ANDI;
@@ -497,6 +506,16 @@ static int tcg_target_const_match(tcg_target_long val,
} else {
return val == (int16_t)val;
}
+ } else if (ct & TCG_CT_CONST_MULI) {
+ /* Immediates that may be used with multiply. If we have the
+ general-instruction-extensions, then we have MULTIPLY SINGLE
+ IMMEDIATE with a signed 32-bit, otherwise we have only
+ MULTIPLY HALFWORD IMMEDIATE, with a signed 16-bit. */
+ if (facilities & FACILITY_GEN_INST_EXT) {
+ return val == (int32_t)val;
+ } else {
+ return val == (int16_t)val;
+ }
} else if (ct & TCG_CT_CONST_ANDI) {
return tcg_match_andi(ct, val);
} else if (ct & TCG_CT_CONST_ORI) {
@@ -1511,10 +1530,26 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
break;
case INDEX_op_mul_i32:
- tcg_out_insn(s, RRE, MSR, args[0], args[2]);
+ if (const_args[2]) {
+ if ((int32_t)args[2] == (int16_t)args[2]) {
+ tcg_out_insn(s, RI, MHI, args[0], args[2]);
+ } else {
+ tcg_out_insn(s, RIL, MSFI, args[0], args[2]);
+ }
+ } else {
+ tcg_out_insn(s, RRE, MSR, args[0], args[2]);
+ }
break;
case INDEX_op_mul_i64:
- tcg_out_insn(s, RRE, MSGR, args[0], args[2]);
+ if (const_args[2]) {
+ if (args[2] == (int16_t)args[2]) {
+ tcg_out_insn(s, RI, MGHI, args[0], args[2]);
+ } else {
+ tcg_out_insn(s, RIL, MSGFI, args[0], args[2]);
+ }
+ } else {
+ tcg_out_insn(s, RRE, MSGR, args[0], args[2]);
+ }
break;
case INDEX_op_div2_i32:
@@ -1755,7 +1790,7 @@ static const TCGTargetOpDef s390_op_defs[] = {
{ INDEX_op_add_i32, { "r", "0", "rWI" } },
{ INDEX_op_sub_i32, { "r", "0", "rWNI" } },
- { INDEX_op_mul_i32, { "r", "0", "r" } },
+ { INDEX_op_mul_i32, { "r", "0", "rK" } },
{ INDEX_op_div2_i32, { "b", "a", "0", "1", "r" } },
{ INDEX_op_divu2_i32, { "b", "a", "0", "1", "r" } },
@@ -1817,7 +1852,7 @@ static const TCGTargetOpDef s390_op_defs[] = {
{ INDEX_op_add_i64, { "r", "0", "rI" } },
{ INDEX_op_sub_i64, { "r", "0", "rNI" } },
- { INDEX_op_mul_i64, { "r", "0", "r" } },
+ { INDEX_op_mul_i64, { "r", "0", "rK" } },
{ INDEX_op_div2_i64, { "b", "a", "0", "1", "r" } },
{ INDEX_op_divu2_i64, { "b", "a", "0", "1", "r" } },
--
1.7.0.1
next prev parent reply other threads:[~2010-06-04 19:17 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-04 19:14 [Qemu-devel] [PATCH 00/35] S390 TCG target, version 2 Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 01/35] tcg-s390: Adjust compilation flags Richard Henderson
2010-06-09 22:53 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 02/35] s390x: Avoid _llseek Richard Henderson
2010-06-09 22:54 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 03/35] s390x: Don't use a linker script for user-only Richard Henderson
2010-06-09 22:54 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 04/35] tcg-s390: Compute is_write in cpu_signal_handler Richard Henderson
2010-06-09 22:54 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 05/35] tcg-s390: Icache flush is a no-op Richard Henderson
2010-06-09 22:55 ` Aurelien Jarno
2010-06-10 22:04 ` Richard Henderson
2010-06-11 6:46 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 06/35] tcg-s390: Allocate the code_gen_buffer near the main program Richard Henderson
2010-06-09 22:59 ` Aurelien Jarno
2010-06-10 22:05 ` Richard Henderson
2010-06-11 7:31 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 07/35] tcg: Optionally sign-extend 32-bit arguments for 64-bit host Richard Henderson
2010-06-10 10:22 ` Aurelien Jarno
2010-06-10 22:08 ` Richard Henderson
2010-06-14 22:20 ` Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 08/35] s390: Update disassembler to the last GPLv2 from binutils Richard Henderson
2010-06-09 22:47 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 09/35] s390: Disassemble some general-instruction-extension insns Richard Henderson
2010-06-09 22:47 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 10/35] tcg-s390: New TCG target Richard Henderson
2010-06-10 10:24 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 11/35] tcg-s390: Tidy unimplemented opcodes Richard Henderson
2010-06-10 10:24 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 12/35] tcg-s390: Define TCG_TMP0 Richard Henderson
2010-06-10 10:25 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 13/35] tcg-s390: Tidy regset initialization; use R14 as temporary Richard Henderson
2010-06-10 10:26 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 14/35] tcg-s390: Rearrange register allocation order Richard Henderson
2010-06-10 10:26 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 15/35] tcg-s390: Query instruction extensions that are installed Richard Henderson
2010-06-10 10:28 ` Aurelien Jarno
2010-06-10 22:19 ` Richard Henderson
2010-06-11 8:06 ` Aurelien Jarno
2010-06-11 13:07 ` Richard Henderson
2010-06-12 11:57 ` Aurelien Jarno
2010-06-11 13:13 ` Richard Henderson
2010-06-13 10:49 ` Aurelien Jarno
2010-06-13 16:02 ` Richard Henderson
2010-06-13 16:44 ` Aurelien Jarno
2010-06-13 22:23 ` Alexander Graf
2010-06-14 16:20 ` Richard Henderson
2010-06-14 17:39 ` Alexander Graf
2010-06-04 19:14 ` [Qemu-devel] [PATCH 16/35] tcg-s390: Re-implement tcg_out_movi Richard Henderson
2010-06-12 12:04 ` Aurelien Jarno
2010-06-13 23:19 ` Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 17/35] tcg-s390: Implement sign and zero-extension operations Richard Henderson
2010-06-12 12:32 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 18/35] tcg-s390: Implement bswap operations Richard Henderson
2010-06-12 12:32 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 19/35] tcg-s390: Implement rotates Richard Henderson
2010-06-12 12:33 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 20/35] tcg-s390: Use LOAD COMPLIMENT for negate Richard Henderson
2010-06-12 12:33 ` Aurelien Jarno
2010-06-04 19:14 ` [Qemu-devel] [PATCH 21/35] tcg-s390: Use the ADD IMMEDIATE instructions Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 22/35] tcg-s390: Use the AND " Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 23/35] tcg-s390: Use the OR " Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 24/35] tcg-s390: Use the XOR " Richard Henderson
2010-06-04 19:14 ` Richard Henderson [this message]
2010-06-04 19:14 ` [Qemu-devel] [PATCH 26/35] tcg-s390: Tidy goto_tb Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 27/35] tcg-s390: Rearrange qemu_ld/st to avoid register copy Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 28/35] tcg-s390: Tidy tcg_prepare_qemu_ldst Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 29/35] tcg-s390: Tidy user qemu_ld/st Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 30/35] tcg-s390: Implement GUEST_BASE Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 31/35] tcg-s390: Use 16-bit branches for forward jumps Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 32/35] tcg-s390: Use the LOAD AND TEST instruction for compares Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 33/35] tcg-s390: Use the COMPARE IMMEDIATE instrucions " Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 34/35] tcg-s390: Use COMPARE AND BRANCH instructions Richard Henderson
2010-06-04 19:14 ` [Qemu-devel] [PATCH 35/35] tcg-s390: Enable compile in 32-bit mode Richard Henderson
2010-06-08 13:11 ` [Qemu-devel] Re: [PATCH 00/35] S390 TCG target, version 2 Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275678883-7082-26-git-send-email-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=agraf@suse.de \
--cc=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).