From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 08/19] Convert RTC to use enumerations for configuration parameters
Date: Mon, 7 Jun 2010 15:42:21 +0100 [thread overview]
Message-ID: <1275921752-29420-9-git-send-email-berrange@redhat.com> (raw)
In-Reply-To: <1275921752-29420-1-git-send-email-berrange@redhat.com>
Convert the rtc clock and driftfix parameters to use enums for
configuration. This ensures strict validation at time of config
parsing.
Also fixes a bug in qemu-config.c where 'driftfix' was never
enabled because this is a target independant compliation unit,
thus cannot include config-target.h and thus never has the
TARGET_I386 symbol defined.
Ideally the 'base' parameter would be an enum too, but this
value is overloaded to also accept a pretty-printed start
date.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
hw/mc146818rtc.c | 8 ++++----
qemu-config.c | 27 +++++++++++++++++++++++----
sysemu.h | 20 +++++++++++++++++++-
vl.c | 34 ++++++++++------------------------
4 files changed, 56 insertions(+), 33 deletions(-)
diff --git a/hw/mc146818rtc.c b/hw/mc146818rtc.c
index c3e6a70..cbb072c 100644
--- a/hw/mc146818rtc.c
+++ b/hw/mc146818rtc.c
@@ -202,7 +202,7 @@ static void rtc_periodic_timer(void *opaque)
if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
s->cmos_data[RTC_REG_C] |= 0xc0;
#ifdef TARGET_I386
- if(rtc_td_hack) {
+ if(rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW) {
if (s->irq_reinject_on_ack_count >= RTC_REINJECT_ON_ACK_COUNT)
s->irq_reinject_on_ack_count = 0;
apic_reset_irq_delivered();
@@ -552,7 +552,7 @@ static int rtc_post_load(void *opaque, int version_id)
RTCState *s = opaque;
if (version_id >= 2) {
- if (rtc_td_hack) {
+ if (rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW) {
rtc_coalesced_timer_update(s);
}
}
@@ -597,7 +597,7 @@ static void rtc_reset(void *opaque)
qemu_irq_lower(s->irq);
#ifdef TARGET_I386
- if (rtc_td_hack)
+ if (rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW)
s->irq_coalesced = 0;
#endif
}
@@ -619,7 +619,7 @@ static int rtc_initfn(ISADevice *dev)
s->periodic_timer = qemu_new_timer(rtc_clock, rtc_periodic_timer, s);
#ifdef TARGET_I386
- if (rtc_td_hack)
+ if (rtc_driftfix == QEMU_RTC_DRIFTFIX_SLEW)
s->coalesced_timer =
qemu_new_timer(rtc_clock, rtc_coalesced_timer, s);
#endif
diff --git a/qemu-config.c b/qemu-config.c
index f656e6b..75cddc1 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -288,6 +288,11 @@ QemuOptsList qemu_net_opts = {
},
};
+QEMU_ENUM_IMPL(qemu_rtc_clock, QEMU_RTC_CLOCK_LAST,
+ "host", "guest");
+QEMU_ENUM_IMPL(qemu_rtc_driftfix, QEMU_RTC_DRIFTFIX_LAST,
+ "none", "slew");
+
QemuOptsList qemu_rtc_opts = {
.name = "rtc",
.head = QTAILQ_HEAD_INITIALIZER(qemu_rtc_opts.head),
@@ -297,12 +302,26 @@ QemuOptsList qemu_rtc_opts = {
.type = QEMU_OPT_STRING,
},{
.name = "clock",
- .type = QEMU_OPT_STRING,
-#ifdef TARGET_I386
+ .type = QEMU_OPT_ENUM,
+ .validate = {
+ .optEnum = {
+ .to_string = qemu_rtc_clock_to_string,
+ .to_string_list = qemu_rtc_clock_to_string_list,
+ .from_string = qemu_rtc_clock_from_string,
+ .last = QEMU_RTC_CLOCK_LAST,
+ },
+ },
},{
.name = "driftfix",
- .type = QEMU_OPT_STRING,
-#endif
+ .type = QEMU_OPT_ENUM,
+ .validate = {
+ .optEnum = {
+ .to_string = qemu_rtc_driftfix_to_string,
+ .to_string_list = qemu_rtc_driftfix_to_string_list,
+ .from_string = qemu_rtc_driftfix_from_string,
+ .last = QEMU_RTC_DRIFTFIX_LAST,
+ },
+ },
},
{ /* end if list */ }
},
diff --git a/sysemu.h b/sysemu.h
index f0c5eb8..4d39566 100644
--- a/sysemu.h
+++ b/sysemu.h
@@ -120,7 +120,6 @@ extern uint8_t irq0override;
extern DisplayType display_type;
extern const char *keyboard_layout;
extern int win2k_install_hack;
-extern int rtc_td_hack;
extern int alt_grab;
extern int ctrl_grab;
extern int usb_enabled;
@@ -133,7 +132,26 @@ extern int no_shutdown;
extern int semihosting_enabled;
extern int old_param;
extern int boot_menu;
+
extern QEMUClock *rtc_clock;
+extern int rtc_driftfix;
+
+enum {
+ QEMU_RTC_CLOCK_HOST,
+ QEMU_RTC_CLOCK_GUEST,
+
+ QEMU_RTC_CLOCK_LAST
+};
+QEMU_ENUM_DECL(qemu_rtc_clock);
+
+enum {
+ QEMU_RTC_DRIFTFIX_NONE,
+ QEMU_RTC_DRIFTFIX_SLEW,
+
+ QEMU_RTC_DRIFTFIX_LAST
+};
+QEMU_ENUM_DECL(qemu_rtc_driftfix);
+
#define MAX_NODES 64
extern int nb_numa_nodes;
diff --git a/vl.c b/vl.c
index 16491c4..0b38d62 100644
--- a/vl.c
+++ b/vl.c
@@ -201,7 +201,7 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];
CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
int win2k_install_hack = 0;
-int rtc_td_hack = 0;
+int rtc_driftfix = QEMU_RTC_DRIFTFIX_NONE;
int usb_enabled = 0;
int singlestep = 0;
int smp_cpus = 1;
@@ -418,6 +418,9 @@ static void configure_rtc_date_offset(const char *startdate, int legacy)
static void configure_rtc(QemuOpts *opts)
{
const char *value;
+ QEMUClock *clocks[] = { host_clock, vm_clock };
+ verify_true(ARRAY_SIZE(clocks) == QEMU_RTC_CLOCK_LAST);
+ int clock;
value = qemu_opt_get(opts, "base");
if (value) {
@@ -429,28 +432,11 @@ static void configure_rtc(QemuOpts *opts)
configure_rtc_date_offset(value, 0);
}
}
- value = qemu_opt_get(opts, "clock");
- if (value) {
- if (!strcmp(value, "host")) {
- rtc_clock = host_clock;
- } else if (!strcmp(value, "vm")) {
- rtc_clock = vm_clock;
- } else {
- fprintf(stderr, "qemu: invalid option value '%s'\n", value);
- exit(1);
- }
- }
- value = qemu_opt_get(opts, "driftfix");
- if (value) {
- if (!strcmp(value, "slew")) {
- rtc_td_hack = 1;
- } else if (!strcmp(value, "none")) {
- rtc_td_hack = 0;
- } else {
- fprintf(stderr, "qemu: invalid option value '%s'\n", value);
- exit(1);
- }
- }
+
+ clock = qemu_opt_get_enum(opts, "clock", QEMU_RTC_CLOCK_HOST);
+ rtc_clock = clocks[clock];
+
+ rtc_driftfix = qemu_opt_get_enum(opts, "driftfix", QEMU_RTC_DRIFTFIX_NONE);
}
/***********************************************************/
@@ -3149,7 +3135,7 @@ int main(int argc, char **argv, char **envp)
win2k_install_hack = 1;
break;
case QEMU_OPTION_rtc_td_hack:
- rtc_td_hack = 1;
+ rtc_driftfix = QEMU_RTC_DRIFTFIX_SLEW;
break;
case QEMU_OPTION_acpitable:
do_acpitable_option(optarg);
--
1.6.6.1
next prev parent reply other threads:[~2010-06-07 14:43 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-07 14:42 [Qemu-devel] [PATCH 00/19] RFC: Reporting QEMU binary capabilities Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 01/19] Add support for JSON pretty printing Daniel P. Berrange
2010-06-09 19:51 ` Luiz Capitulino
2010-06-07 14:42 ` [Qemu-devel] [PATCH 02/19] Add support for compile time assertions Daniel P. Berrange
2010-06-07 15:35 ` [Qemu-devel] " Paolo Bonzini
2010-06-07 14:42 ` [Qemu-devel] [PATCH 03/19] Add enum handlers for easy & efficient string <-> int conversion Daniel P. Berrange
2010-06-09 19:52 ` Luiz Capitulino
2010-06-26 6:52 ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 04/19] Add support for a option parameter as an enum Daniel P. Berrange
2010-06-26 6:59 ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 05/19] Ensure that QEMU exits if drive_add parsing fails Daniel P. Berrange
2010-06-26 7:04 ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 06/19] Convert drive options to use enumeration data type Daniel P. Berrange
2010-06-09 19:52 ` Luiz Capitulino
2010-06-26 7:07 ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 07/19] Convert netdev client types to use an enumeration Daniel P. Berrange
2010-06-07 15:09 ` Anthony Liguori
2010-06-07 15:13 ` Daniel P. Berrange
2010-06-07 14:42 ` Daniel P. Berrange [this message]
2010-06-09 19:54 ` [Qemu-devel] [PATCH 08/19] Convert RTC to use enumerations for configuration parameters Luiz Capitulino
2010-06-07 14:42 ` [Qemu-devel] [PATCH 09/19] Change 'query-version' to output broken down version string Daniel P. Berrange
2010-06-07 15:11 ` Anthony Liguori
2010-06-09 20:04 ` Luiz Capitulino
2010-06-07 14:42 ` [Qemu-devel] [PATCH 10/19] Add a query-machines command to QMP Daniel P. Berrange
2010-06-07 15:13 ` Anthony Liguori
2010-06-07 16:44 ` Daniel P. Berrange
2010-06-07 17:07 ` Anthony Liguori
2010-06-07 17:14 ` Daniel P. Berrange
2010-06-09 20:06 ` Luiz Capitulino
2010-06-07 14:42 ` [Qemu-devel] [PATCH 11/19] Add a query-devices " Daniel P. Berrange
2010-06-07 15:14 ` Anthony Liguori
2010-06-07 16:03 ` Daniel P. Berrange
2010-06-26 7:12 ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 12/19] Add a query-cputypes " Daniel P. Berrange
2010-06-26 7:18 ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 13/19] Add a query-target " Daniel P. Berrange
2010-06-07 15:43 ` [Qemu-devel] " Paolo Bonzini
2010-06-07 14:42 ` [Qemu-devel] [PATCH 14/19] Add a query-argv " Daniel P. Berrange
2010-06-07 15:01 ` Anthony Liguori
2010-06-10 15:34 ` [Qemu-devel] " Paolo Bonzini
2010-06-26 7:30 ` [Qemu-devel] " Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 15/19] Expand query-argv to include help string Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 16/19] Add a query-netdev command to QMP Daniel P. Berrange
2010-06-07 15:15 ` Anthony Liguori
2010-06-26 7:32 ` Markus Armbruster
2010-06-07 19:13 ` Miguel Di Ciurcio Filho
2010-06-08 8:38 ` Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 17/19] Add a query-config " Daniel P. Berrange
2010-06-26 7:34 ` Markus Armbruster
2010-06-07 14:42 ` [Qemu-devel] [PATCH 18/19] Add option to turn on JSON pretty printing in monitor Daniel P. Berrange
2010-06-07 14:42 ` [Qemu-devel] [PATCH 19/19] Add a -capabilities argument to allow easy query for static QEMU info Daniel P. Berrange
2010-06-07 16:04 ` [Qemu-devel] " Paolo Bonzini
2010-06-07 16:09 ` Daniel P. Berrange
2010-06-07 16:04 ` [Qemu-devel] " Anthony Liguori
2010-06-07 14:58 ` [Qemu-devel] [PATCH 00/19] RFC: Reporting QEMU binary capabilities Anthony Liguori
2010-06-07 15:10 ` Daniel P. Berrange
2010-06-07 15:18 ` Anthony Liguori
2010-06-07 16:02 ` [Qemu-devel] " Paolo Bonzini
2010-06-07 16:03 ` Anthony Liguori
2010-06-07 16:07 ` [Qemu-devel] " Anthony Liguori
2010-06-09 20:25 ` Luiz Capitulino
2010-06-26 6:45 ` Markus Armbruster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275921752-29420-9-git-send-email-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).