From: "Venkateswararao Jujjuri (JV)" <jvrao@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: aliguori@us.ibm.com, Sripathi Kodi <sripathik@in.ibm.com>,
Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PATCH 09/20] virtio-9p: Implement server side of setattr for 9P2000.L protocol.
Date: Mon, 28 Jun 2010 14:55:06 -0700 [thread overview]
Message-ID: <1277762117-11212-9-git-send-email-jvrao@linux.vnet.ibm.com> (raw)
In-Reply-To: <1277762117-11212-1-git-send-email-jvrao@linux.vnet.ibm.com>
From: Sripathi Kodi <sripathik@in.ibm.com>
SYNOPSIS
size[4] Tsetattr tag[2] attr[n]
size[4] Rsetattr tag[2]
DESCRIPTION
The setattr command changes some of the file status information.
attr resembles the iattr structure used in Linux kernel. It
specifies which status parameter is to be changed and to what
value. It is laid out as follows:
valid[4]
specifies which status information is to be changed. Possible
values are:
ATTR_MODE (1 << 0)
ATTR_UID (1 << 1)
ATTR_GID (1 << 2)
ATTR_SIZE (1 << 3)
ATTR_ATIME (1 << 4)
ATTR_MTIME (1 << 5)
ATTR_CTIME (1 << 5)
ATTR_ATIME_SET (1 << 7)
ATTR_MTIME_SET (1 << 8)
The last two bits represent whether the time information
is being sent by the client's user space. In the absense
of these bits the server always uses server's time.
mode[4]
File permission bits
uid[4]
Owner id of file
gid[4]
Group id of the file
size[8]
File size
atime_sec[8]
Time of last file access, seconds
atime_nsec[8]
Time of last file access, nanoseconds
mtime_sec[8]
Time of last file modification, seconds
mtime_nsec[8]
Time of last file modification, nanoseconds
Explanation of the patches:
--------------------------
*) The kernel just copies relevent contents of iattr structure to p9_iattr_dotl
structure and passes it down to the client. The only check it has is calling
inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file parameters because
I don't think these are needed in our case. The client user space can request
updating just ctime by calling chown(fd, -1, -1). This is handled on server
side without a need for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and size of the
file.
*) 9P RFC says "Either all the changes in wstat request happen, or none of them
does: if the request succeeds, all changes were made; if it fails, none were."
I have not done anything to implement this specifically because I don't see
a reason.
[jvrao@linux.vnet.ibm.com: Parts of code for handling chown(-1,-1)
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
---
hw/virtio-9p-local.c | 5 +-
hw/virtio-9p.c | 155 ++++++++++++++++++++++++++++++++++++++++++++++++++
hw/virtio-9p.h | 23 ++++++++
3 files changed, 182 insertions(+), 1 deletions(-)
diff --git a/hw/virtio-9p-local.c b/hw/virtio-9p-local.c
index b29f513..1f72f2e 100644
--- a/hw/virtio-9p-local.c
+++ b/hw/virtio-9p-local.c
@@ -445,7 +445,10 @@ static int local_rename(FsContext *ctx, const char *oldpath,
static int local_chown(FsContext *fs_ctx, const char *path, FsCred *credp)
{
- if (fs_ctx->fs_sm == SM_MAPPED) {
+ if ((credp->fc_uid == -1 && credp->fc_gid == -1) ||
+ (fs_ctx->fs_sm == SM_PASSTHROUGH)) {
+ return lchown(rpath(fs_ctx, path), credp->fc_uid, credp->fc_gid);
+ } else if (fs_ctx->fs_sm == SM_MAPPED) {
return local_set_xattr(rpath(fs_ctx, path), credp);
} else if (fs_ctx->fs_sm == SM_PASSTHROUGH) {
return lchown(rpath(fs_ctx, path), credp->fc_uid, credp->fc_gid);
diff --git a/hw/virtio-9p.c b/hw/virtio-9p.c
index 613abcd..b1b3cb5 100644
--- a/hw/virtio-9p.c
+++ b/hw/virtio-9p.c
@@ -665,6 +665,15 @@ static size_t pdu_unmarshal(V9fsPDU *pdu, size_t offset, const char *fmt, ...)
&statp->n_muid);
break;
}
+ case 'I': {
+ V9fsIattr *iattr = va_arg(ap, V9fsIattr *);
+ offset += pdu_unmarshal(pdu, offset, "ddddqqqqq",
+ &iattr->valid, &iattr->mode,
+ &iattr->uid, &iattr->gid, &iattr->size,
+ &iattr->atime_sec, &iattr->atime_nsec,
+ &iattr->mtime_sec, &iattr->mtime_nsec);
+ break;
+ }
default:
break;
}
@@ -1210,6 +1219,151 @@ out:
qemu_free(vs);
}
+/* From Linux kernel code */
+#define ATTR_MODE (1 << 0)
+#define ATTR_UID (1 << 1)
+#define ATTR_GID (1 << 2)
+#define ATTR_SIZE (1 << 3)
+#define ATTR_ATIME (1 << 4)
+#define ATTR_MTIME (1 << 5)
+#define ATTR_CTIME (1 << 6)
+#define ATTR_MASK 127
+#define ATTR_ATIME_SET (1 << 7)
+#define ATTR_MTIME_SET (1 << 8)
+
+static void v9fs_setattr_post_truncate(V9fsState *s, V9fsSetattrState *vs,
+ int err)
+{
+ if (err == -1) {
+ err = -errno;
+ goto out;
+ }
+ err = vs->offset;
+
+out:
+ complete_pdu(s, vs->pdu, err);
+ qemu_free(vs);
+}
+
+static void v9fs_setattr_post_chown(V9fsState *s, V9fsSetattrState *vs, int err)
+{
+ if (err == -1) {
+ err = -errno;
+ goto out;
+ }
+
+ if (vs->v9iattr.valid & (ATTR_SIZE)) {
+ err = v9fs_do_truncate(s, &vs->fidp->path, vs->v9iattr.size);
+ }
+ v9fs_setattr_post_truncate(s, vs, err);
+ return;
+
+out:
+ complete_pdu(s, vs->pdu, err);
+ qemu_free(vs);
+}
+
+static void v9fs_setattr_post_utimensat(V9fsState *s, V9fsSetattrState *vs,
+ int err)
+{
+ if (err == -1) {
+ err = -errno;
+ goto out;
+ }
+
+ /* If the only valid entry in iattr is ctime we can call
+ * chown(-1,-1) to update the ctime of the file
+ */
+ if ((vs->v9iattr.valid & (ATTR_UID | ATTR_GID)) ||
+ ((vs->v9iattr.valid & ATTR_CTIME)
+ && !((vs->v9iattr.valid & ATTR_MASK) & ~ATTR_CTIME))) {
+ if (!(vs->v9iattr.valid & ATTR_UID)) {
+ vs->v9iattr.uid = -1;
+ }
+ if (!(vs->v9iattr.valid & ATTR_GID)) {
+ vs->v9iattr.gid = -1;
+ }
+ err = v9fs_do_chown(s, &vs->fidp->path, vs->v9iattr.uid,
+ vs->v9iattr.gid);
+ }
+ v9fs_setattr_post_chown(s, vs, err);
+ return;
+
+out:
+ complete_pdu(s, vs->pdu, err);
+ qemu_free(vs);
+}
+
+static void v9fs_setattr_post_chmod(V9fsState *s, V9fsSetattrState *vs, int err)
+{
+ if (err == -1) {
+ err = -errno;
+ goto out;
+ }
+
+ if (vs->v9iattr.valid & (ATTR_ATIME | ATTR_MTIME)) {
+ struct timespec times[2];
+ if (vs->v9iattr.valid & ATTR_ATIME) {
+ if (vs->v9iattr.valid & ATTR_ATIME_SET) {
+ times[0].tv_sec = vs->v9iattr.atime_sec;
+ times[0].tv_nsec = vs->v9iattr.atime_nsec;
+ } else {
+ times[0].tv_nsec = UTIME_NOW;
+ }
+ } else {
+ times[0].tv_nsec = UTIME_OMIT;
+ }
+
+ if (vs->v9iattr.valid & ATTR_MTIME) {
+ if (vs->v9iattr.valid & ATTR_MTIME_SET) {
+ times[1].tv_sec = vs->v9iattr.mtime_sec;
+ times[1].tv_nsec = vs->v9iattr.mtime_nsec;
+ } else {
+ times[1].tv_nsec = UTIME_NOW;
+ }
+ } else {
+ times[1].tv_nsec = UTIME_OMIT;
+ }
+ err = v9fs_do_utimensat(s, &vs->fidp->path, times);
+ }
+ v9fs_setattr_post_utimensat(s, vs, err);
+ return;
+
+out:
+ complete_pdu(s, vs->pdu, err);
+ qemu_free(vs);
+}
+
+static void v9fs_setattr(V9fsState *s, V9fsPDU *pdu)
+{
+ int32_t fid;
+ V9fsSetattrState *vs;
+ int err = 0;
+
+ vs = qemu_malloc(sizeof(*vs));
+ vs->pdu = pdu;
+ vs->offset = 7;
+
+ pdu_unmarshal(pdu, vs->offset, "dI", &fid, &vs->v9iattr);
+
+ vs->fidp = lookup_fid(s, fid);
+ if (vs->fidp == NULL) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (vs->v9iattr.valid & ATTR_MODE) {
+ err = v9fs_do_chmod(s, &vs->fidp->path, vs->v9iattr.mode);
+ }
+
+ v9fs_setattr_post_chmod(s, vs, err);
+ return;
+
+out:
+ complete_pdu(s, vs->pdu, err);
+ qemu_free(vs);
+}
+
static void v9fs_walk_complete(V9fsState *s, V9fsWalkState *vs, int err)
{
complete_pdu(s, vs->pdu, err);
@@ -2485,6 +2639,7 @@ static pdu_handler_t *pdu_handlers[] = {
[P9_TREADDIR] = v9fs_readdir,
[P9_TSTATFS] = v9fs_statfs,
[P9_TGETATTR] = v9fs_getattr,
+ [P9_TSETATTR] = v9fs_setattr,
[P9_TVERSION] = v9fs_version,
[P9_TATTACH] = v9fs_attach,
[P9_TSTAT] = v9fs_stat,
diff --git a/hw/virtio-9p.h b/hw/virtio-9p.h
index bfcd0a0..a0ee7d3 100644
--- a/hw/virtio-9p.h
+++ b/hw/virtio-9p.h
@@ -17,6 +17,8 @@ enum {
P9_RSTATFS,
P9_TGETATTR = 24,
P9_RGETATTR,
+ P9_TSETATTR = 26,
+ P9_RSETATTR,
P9_TREADDIR = 40,
P9_RREADDIR,
P9_TVERSION = 100,
@@ -285,6 +287,27 @@ typedef struct V9fsWstatState
V9fsString nname;
} V9fsWstatState;
+typedef struct V9fsIattr
+{
+ int32_t valid;
+ int32_t mode;
+ int32_t uid;
+ int32_t gid;
+ int64_t size;
+ int64_t atime_sec;
+ int64_t atime_nsec;
+ int64_t mtime_sec;
+ int64_t mtime_nsec;
+} V9fsIattr;
+
+typedef struct V9fsSetattrState
+{
+ V9fsPDU *pdu;
+ size_t offset;
+ V9fsIattr v9iattr;
+ V9fsFidState *fidp;
+} V9fsSetattrState;
+
struct virtio_9p_config
{
/* number of characters in tag */
--
1.6.5.2
next prev parent reply other threads:[~2010-06-28 21:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-28 21:54 [Qemu-devel] [PATCH 01/20] qemu: virtio-9p: Recognize 9P2000.L protocol Venkateswararao Jujjuri (JV)
2010-06-28 21:54 ` [Qemu-devel] [PATCH 02/20] qemu: virtio-9p: Implement statfs support in server Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 03/20] virtio-9p: Return correct error from v9fs_remove Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 04/20] [V4] virtio-9p: readdir implementation for 9p2000.L Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 05/20] virtio-9p: Compute iounit based on host filesystem block size Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 06/20] virtio-9p: getattr server implementation for 9P2000.L protocol Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 07/20] virtio-9p: Do not reset atime Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 08/20] [virtio-9p] Make v9fs_do_utimensat accept timespec structures instead of v9stat Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` Venkateswararao Jujjuri (JV) [this message]
2010-06-28 21:55 ` [Qemu-devel] [PATCH 10/20] [virtio-9p] Implement TLINK for 9P2000.L Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 11/20] [virtio-9p] Define and implement TSYMLINK " Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 12/20] [virtio-9p] This patch implements TLCREATE for 9p2000.L protocol Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 13/20] qemu: virtio-9p: Implement TMKNOD Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 14/20] qemu: virtio-9p: Implement TMKDIR Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 15/20] rename - change name of file or directory Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 16/20] qemu: virtio-9p: Implement LOPEN Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 17/20] virtio-9p: Add fidtype so that we can do type specific operation Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 18/20] virtio-9p: Implement TXATTRWALK Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 19/20] virtio-9p: Implement TXATTRCREATE Venkateswararao Jujjuri (JV)
2010-06-28 21:55 ` [Qemu-devel] [PATCH 20/20] virtio-9p: Hide user.virtfs xattr in case of mapped security Venkateswararao Jujjuri (JV)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277762117-11212-9-git-send-email-jvrao@linux.vnet.ibm.com \
--to=jvrao@linux.vnet.ibm.com \
--cc=aliguori@us.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=sripathik@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).