qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
To: mst@redhat.com
Cc: kvm@vger.kernel.org, joro@8bytes.org, qemu-devel@nongnu.org,
	blauwirbel@gmail.com, yamahata@valinux.co.jp,
	paul@codesourcery.com,
	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>,
	avi@redhat.com
Subject: [Qemu-devel] [PATCH 6/7] eepro100: use the PCI memory access interface
Date: Sat, 28 Aug 2010 17:54:57 +0300	[thread overview]
Message-ID: <1283007298-10942-7-git-send-email-eduard.munteanu@linux360.ro> (raw)
In-Reply-To: <1283007298-10942-1-git-send-email-eduard.munteanu@linux360.ro>

This allows the device to work properly with an emulated IOMMU.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
---
 hw/eepro100.c |   86 ++++++++++++++++++++++++++++++--------------------------
 1 files changed, 46 insertions(+), 40 deletions(-)

diff --git a/hw/eepro100.c b/hw/eepro100.c
index 2b75c8f..5b7d82a 100644
--- a/hw/eepro100.c
+++ b/hw/eepro100.c
@@ -306,10 +306,10 @@ static const uint16_t eepro100_mdi_mask[] = {
 };
 
 /* XXX: optimize */
-static void stl_le_phys(target_phys_addr_t addr, uint32_t val)
+static void stl_le_phys(EEPRO100State * s, pcibus_t addr, uint32_t val)
 {
     val = cpu_to_le32(val);
-    cpu_physical_memory_write(addr, (const uint8_t *)&val, sizeof(val));
+    pci_memory_write(&s->dev, addr, (const uint8_t *)&val, sizeof(val));
 }
 
 #define POLYNOMIAL 0x04c11db6
@@ -692,12 +692,12 @@ static void dump_statistics(EEPRO100State * s)
      * values which really matter.
      * Number of data should check configuration!!!
      */
-    cpu_physical_memory_write(s->statsaddr,
-                              (uint8_t *) & s->statistics, s->stats_size);
-    stl_le_phys(s->statsaddr + 0, s->statistics.tx_good_frames);
-    stl_le_phys(s->statsaddr + 36, s->statistics.rx_good_frames);
-    stl_le_phys(s->statsaddr + 48, s->statistics.rx_resource_errors);
-    stl_le_phys(s->statsaddr + 60, s->statistics.rx_short_frame_errors);
+    pci_memory_write(&s->dev, s->statsaddr,
+                     (uint8_t *) & s->statistics, s->stats_size);
+    stl_le_phys(s, s->statsaddr + 0, s->statistics.tx_good_frames);
+    stl_le_phys(s, s->statsaddr + 36, s->statistics.rx_good_frames);
+    stl_le_phys(s, s->statsaddr + 48, s->statistics.rx_resource_errors);
+    stl_le_phys(s, s->statsaddr + 60, s->statistics.rx_short_frame_errors);
 #if 0
     stw_le_phys(s->statsaddr + 76, s->statistics.xmt_tco_frames);
     stw_le_phys(s->statsaddr + 78, s->statistics.rcv_tco_frames);
@@ -707,7 +707,8 @@ static void dump_statistics(EEPRO100State * s)
 
 static void read_cb(EEPRO100State *s)
 {
-    cpu_physical_memory_read(s->cb_address, (uint8_t *) &s->tx, sizeof(s->tx));
+    pci_memory_read(&s->dev,
+                    s->cb_address, (uint8_t *) &s->tx, sizeof(s->tx));
     s->tx.status = le16_to_cpu(s->tx.status);
     s->tx.command = le16_to_cpu(s->tx.command);
     s->tx.link = le32_to_cpu(s->tx.link);
@@ -737,18 +738,18 @@ static void tx_command(EEPRO100State *s)
     }
     assert(tcb_bytes <= sizeof(buf));
     while (size < tcb_bytes) {
-        uint32_t tx_buffer_address = ldl_phys(tbd_address);
-        uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+        uint32_t tx_buffer_address = pci_ldl(&s->dev, tbd_address);
+        uint16_t tx_buffer_size = pci_lduw(&s->dev, tbd_address + 4);
 #if 0
-        uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+        uint16_t tx_buffer_el = pci_lduw(&s->dev, tbd_address + 6);
 #endif
         tbd_address += 8;
         TRACE(RXTX, logout
             ("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
              tx_buffer_address, tx_buffer_size));
         tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
-        cpu_physical_memory_read(tx_buffer_address, &buf[size],
-                                 tx_buffer_size);
+        pci_memory_read(&s->dev,
+                        tx_buffer_address, &buf[size], tx_buffer_size);
         size += tx_buffer_size;
     }
     if (tbd_array == 0xffffffff) {
@@ -759,16 +760,16 @@ static void tx_command(EEPRO100State *s)
         if (s->has_extended_tcb_support && !(s->configuration[6] & BIT(4))) {
             /* Extended Flexible TCB. */
             for (; tbd_count < 2; tbd_count++) {
-                uint32_t tx_buffer_address = ldl_phys(tbd_address);
-                uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
-                uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+                uint32_t tx_buffer_address = pci_ldl(&s->dev, tbd_address);
+                uint16_t tx_buffer_size = pci_lduw(&s->dev, tbd_address + 4);
+                uint16_t tx_buffer_el = pci_lduw(&s->dev, tbd_address + 6);
                 tbd_address += 8;
                 TRACE(RXTX, logout
                     ("TBD (extended flexible mode): buffer address 0x%08x, size 0x%04x\n",
                      tx_buffer_address, tx_buffer_size));
                 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
-                cpu_physical_memory_read(tx_buffer_address, &buf[size],
-                                         tx_buffer_size);
+                pci_memory_read(&s->dev,
+                                tx_buffer_address, &buf[size], tx_buffer_size);
                 size += tx_buffer_size;
                 if (tx_buffer_el & 1) {
                     break;
@@ -777,16 +778,16 @@ static void tx_command(EEPRO100State *s)
         }
         tbd_address = tbd_array;
         for (; tbd_count < s->tx.tbd_count; tbd_count++) {
-            uint32_t tx_buffer_address = ldl_phys(tbd_address);
-            uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
-            uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+            uint32_t tx_buffer_address = pci_ldl(&s->dev, tbd_address);
+            uint16_t tx_buffer_size = pci_lduw(&s->dev, tbd_address + 4);
+            uint16_t tx_buffer_el = pci_lduw(&s->dev, tbd_address + 6);
             tbd_address += 8;
             TRACE(RXTX, logout
                 ("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n",
                  tx_buffer_address, tx_buffer_size));
             tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
-            cpu_physical_memory_read(tx_buffer_address, &buf[size],
-                                     tx_buffer_size);
+            pci_memory_read(&s->dev,
+                            tx_buffer_address, &buf[size], tx_buffer_size);
             size += tx_buffer_size;
             if (tx_buffer_el & 1) {
                 break;
@@ -811,7 +812,7 @@ static void set_multicast_list(EEPRO100State *s)
     TRACE(OTHER, logout("multicast list, multicast count = %u\n", multicast_count));
     for (i = 0; i < multicast_count; i += 6) {
         uint8_t multicast_addr[6];
-        cpu_physical_memory_read(s->cb_address + 10 + i, multicast_addr, 6);
+        pci_memory_read(&s->dev, s->cb_address + 10 + i, multicast_addr, 6);
         TRACE(OTHER, logout("multicast entry %s\n", nic_dump(multicast_addr, 6)));
         unsigned mcast_idx = compute_mcast_idx(multicast_addr);
         assert(mcast_idx < 64);
@@ -845,12 +846,14 @@ static void action_command(EEPRO100State *s)
             /* Do nothing. */
             break;
         case CmdIASetup:
-            cpu_physical_memory_read(s->cb_address + 8, &s->conf.macaddr.a[0], 6);
+            pci_memory_read(&s->dev,
+                            s->cb_address + 8, &s->conf.macaddr.a[0], 6);
             TRACE(OTHER, logout("macaddr: %s\n", nic_dump(&s->conf.macaddr.a[0], 6)));
             break;
         case CmdConfigure:
-            cpu_physical_memory_read(s->cb_address + 8, &s->configuration[0],
-                                     sizeof(s->configuration));
+            pci_memory_read(&s->dev,
+                            s->cb_address + 8,
+                            &s->configuration[0], sizeof(s->configuration));
             TRACE(OTHER, logout("configuration: %s\n", nic_dump(&s->configuration[0], 16)));
             break;
         case CmdMulticastList:
@@ -880,7 +883,7 @@ static void action_command(EEPRO100State *s)
             break;
         }
         /* Write new status. */
-        stw_phys(s->cb_address, s->tx.status | ok_status | STATUS_C);
+        pci_stw(&s->dev, s->cb_address, s->tx.status | ok_status | STATUS_C);
         if (bit_i) {
             /* CU completed action. */
             eepro100_cx_interrupt(s);
@@ -947,7 +950,7 @@ static void eepro100_cu_command(EEPRO100State * s, uint8_t val)
         /* Dump statistical counters. */
         TRACE(OTHER, logout("val=0x%02x (dump stats)\n", val));
         dump_statistics(s);
-        stl_le_phys(s->statsaddr + s->stats_size, 0xa005);
+        stl_le_phys(s, s->statsaddr + s->stats_size, 0xa005);
         break;
     case CU_CMD_BASE:
         /* Load CU base. */
@@ -958,7 +961,7 @@ static void eepro100_cu_command(EEPRO100State * s, uint8_t val)
         /* Dump and reset statistical counters. */
         TRACE(OTHER, logout("val=0x%02x (dump stats and reset)\n", val));
         dump_statistics(s);
-        stl_le_phys(s->statsaddr + s->stats_size, 0xa007);
+        stl_le_phys(s, s->statsaddr + s->stats_size, 0xa007);
         memset(&s->statistics, 0, sizeof(s->statistics));
         break;
     case CU_SRESUME:
@@ -1259,10 +1262,10 @@ static void eepro100_write_port(EEPRO100State * s, uint32_t val)
     case PORT_SELFTEST:
         TRACE(OTHER, logout("selftest address=0x%08x\n", address));
         eepro100_selftest_t data;
-        cpu_physical_memory_read(address, (uint8_t *) & data, sizeof(data));
+        pci_memory_read(&s->dev, address, (uint8_t *) & data, sizeof(data));
         data.st_sign = 0xffffffff;
         data.st_result = 0;
-        cpu_physical_memory_write(address, (uint8_t *) & data, sizeof(data));
+        pci_memory_write(&s->dev, address, (uint8_t *) & data, sizeof(data));
         break;
     case PORT_SELECTIVE_RESET:
         TRACE(OTHER, logout("selective reset, selftest address=0x%08x\n", address));
@@ -1721,8 +1724,9 @@ static ssize_t nic_receive(VLANClientState *nc, const uint8_t * buf, size_t size
     }
     /* !!! */
     eepro100_rx_t rx;
-    cpu_physical_memory_read(s->ru_base + s->ru_offset, (uint8_t *) & rx,
-                             offsetof(eepro100_rx_t, packet));
+    pci_memory_read(&s->dev,
+                    s->ru_base + s->ru_offset,
+                    (uint8_t *) & rx, offsetof(eepro100_rx_t, packet));
     uint16_t rfd_command = le16_to_cpu(rx.command);
     uint16_t rfd_size = le16_to_cpu(rx.size);
 
@@ -1736,9 +1740,11 @@ static ssize_t nic_receive(VLANClientState *nc, const uint8_t * buf, size_t size
     }
     TRACE(OTHER, logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n",
           rfd_command, rx.link, rx.rx_buf_addr, rfd_size));
-    stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, status),
-             rfd_status);
-    stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, count), size);
+    pci_stw(&s->dev,
+            s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, status),
+            rfd_status);
+    pci_stw(&s->dev,
+            s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, count), size);
     /* Early receive interrupt not supported. */
 #if 0
     eepro100_er_interrupt(s);
@@ -1752,8 +1758,8 @@ static ssize_t nic_receive(VLANClientState *nc, const uint8_t * buf, size_t size
 #if 0
     assert(!(s->configuration[17] & BIT(0)));
 #endif
-    cpu_physical_memory_write(s->ru_base + s->ru_offset +
-                              offsetof(eepro100_rx_t, packet), buf, size);
+    pci_memory_write(&s->dev, s->ru_base + s->ru_offset +
+                     offsetof(eepro100_rx_t, packet), buf, size);
     s->statistics.rx_good_frames++;
     eepro100_fr_interrupt(s);
     s->ru_offset = le32_to_cpu(rx.link);
-- 
1.7.1

  parent reply	other threads:[~2010-08-28 14:57 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-28 14:54 [Qemu-devel] [PATCH 0/7] AMD IOMMU emulation patchset v4 Eduard - Gabriel Munteanu
2010-08-28 14:54 ` [Qemu-devel] [PATCH 1/7] pci: expand tabs to spaces in pci_regs.h Eduard - Gabriel Munteanu
2010-08-31 20:29   ` [Qemu-devel] " Michael S. Tsirkin
2010-08-31 22:58     ` Eduard - Gabriel Munteanu
2010-09-01 10:39       ` Michael S. Tsirkin
2010-08-28 14:54 ` [Qemu-devel] [PATCH 2/7] pci: memory access API and IOMMU support Eduard - Gabriel Munteanu
2010-09-02  5:28   ` [Qemu-devel] " Michael S. Tsirkin
2010-09-02  8:40     ` Eduard - Gabriel Munteanu
2010-09-02  9:49       ` Michael S. Tsirkin
2010-09-04  9:01         ` Blue Swirl
2010-09-05  7:10           ` Michael S. Tsirkin
2010-08-28 14:54 ` [Qemu-devel] [PATCH 3/7] AMD IOMMU emulation Eduard - Gabriel Munteanu
2010-08-28 15:58   ` [Qemu-devel] " Blue Swirl
2010-08-28 21:53     ` Eduard - Gabriel Munteanu
2010-08-29 20:37       ` Blue Swirl
2010-08-30  3:07   ` [Qemu-devel] " Isaku Yamahata
2010-08-30  5:54     ` Eduard - Gabriel Munteanu
2010-08-28 14:54 ` [Qemu-devel] [PATCH 4/7] ide: use the PCI memory access interface Eduard - Gabriel Munteanu
2010-09-02  5:19   ` [Qemu-devel] " Michael S. Tsirkin
2010-09-02  9:12     ` Eduard - Gabriel Munteanu
2010-09-02  9:58       ` Michael S. Tsirkin
2010-09-02 15:01         ` Eduard - Gabriel Munteanu
2010-09-02 15:24           ` Avi Kivity
2010-09-02 15:39             ` Michael S. Tsirkin
2010-09-02 16:07               ` Avi Kivity
2010-09-02 15:31           ` Michael S. Tsirkin
2010-08-28 14:54 ` [Qemu-devel] [PATCH 5/7] rtl8139: " Eduard - Gabriel Munteanu
2010-08-28 14:54 ` Eduard - Gabriel Munteanu [this message]
2010-08-28 14:54 ` [Qemu-devel] [PATCH 7/7] ac97: " Eduard - Gabriel Munteanu
2010-08-28 16:00 ` [Qemu-devel] Re: [PATCH 0/7] AMD IOMMU emulation patchset v4 Blue Swirl
2010-08-29  9:55   ` Joerg Roedel
2010-08-29 20:44     ` Blue Swirl
2010-08-29 22:08       ` [Qemu-devel] [PATCH 2/7] pci: memory access API and IOMMU support Eduard - Gabriel Munteanu
2010-08-29 22:11         ` [Qemu-devel] " Eduard - Gabriel Munteanu
2010-09-01 20:10         ` [Qemu-devel] " Stefan Weil
2010-09-02  6:00           ` Michael S. Tsirkin
2010-09-02  9:08             ` Eduard - Gabriel Munteanu
2010-09-02 13:24               ` Anthony Liguori
2010-09-02  8:51           ` Eduard - Gabriel Munteanu
2010-09-02 16:05             ` Stefan Weil
2010-09-02 16:14               ` Eduard - Gabriel Munteanu
2010-09-13 20:01 ` [Qemu-devel] [PATCH RFC] dma_rw.h (was Re: [PATCH 0/7] AMD IOMMU emulation patchset v4) Michael S. Tsirkin
2010-09-13 20:45   ` Anthony Liguori
2010-09-16  7:12     ` Eduard - Gabriel Munteanu
2010-09-16  9:35     ` Michael S. Tsirkin
2010-09-16  7:06   ` [Qemu-devel] " Eduard - Gabriel Munteanu
2010-09-16  9:20     ` Michael S. Tsirkin
2010-09-16 11:15       ` Eduard - Gabriel Munteanu
  -- strict thread matches above, loose matches on Subject: below --
2010-08-15 19:27 [Qemu-devel] [PATCH 0/7] AMD IOMMU emulation patches v3 Eduard - Gabriel Munteanu
2010-08-15 19:27 ` [Qemu-devel] [PATCH 6/7] eepro100: use the PCI memory access interface Eduard - Gabriel Munteanu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1283007298-10942-7-git-send-email-eduard.munteanu@linux360.ro \
    --to=eduard.munteanu@linux360.ro \
    --cc=avi@redhat.com \
    --cc=blauwirbel@gmail.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=paul@codesourcery.com \
    --cc=qemu-devel@nongnu.org \
    --cc=yamahata@valinux.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).