From: anthony.perard@citrix.com
To: qemu-devel@nongnu.org
Cc: Anthony PERARD <anthony.perard@citrix.com>,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
xen-devel@lists.xensource.com, Stefano.Stabellini@eu.citrix.com
Subject: [Qemu-devel] [PATCH RFC V4 03/14] xen: Add xen_machine_fv
Date: Tue, 28 Sep 2010 16:01:26 +0100 [thread overview]
Message-ID: <1285686097-13036-4-git-send-email-anthony.perard@citrix.com> (raw)
In-Reply-To: <1285686097-13036-1-git-send-email-anthony.perard@citrix.com>
From: Anthony PERARD <anthony.perard@citrix.com>
Add the Xen FV (Fully Virtualized) machine to Qemu;
this is groundwork to add Xen device model support in Qemu.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
Makefile.target | 3 +
hw/xen_common.h | 5 ++
hw/xen_machine_fv.c | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 166 insertions(+), 0 deletions(-)
create mode 100644 hw/xen_machine_fv.c
diff --git a/Makefile.target b/Makefile.target
index a4e80b1..7adbc20 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -183,6 +183,9 @@ QEMU_CFLAGS += $(VNC_PNG_CFLAGS)
# xen backend driver support
obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o
+# xen full virtualized machine
+obj-i386-$(CONFIG_XEN) += xen_machine_fv.o
+
# USB layer
obj-$(CONFIG_USB_OHCI) += usb-ohci.o
diff --git a/hw/xen_common.h b/hw/xen_common.h
index 9f75e52..4c0f97d 100644
--- a/hw/xen_common.h
+++ b/hw/xen_common.h
@@ -18,6 +18,11 @@
* We don't support Xen prior to 3.3.0.
*/
+/* Before Xen 4.0.0 */
+#if CONFIG_XEN_CTRL_INTERFACE_VERSION < 400
+# define HVM_MAX_VCPUS 32
+#endif
+
/* Xen unstable */
#if CONFIG_XEN_CTRL_INTERFACE_VERSION < 410
typedef int qemu_xc_interface;
diff --git a/hw/xen_machine_fv.c b/hw/xen_machine_fv.c
new file mode 100644
index 0000000..260cda3
--- /dev/null
+++ b/hw/xen_machine_fv.c
@@ -0,0 +1,158 @@
+/*
+ * QEMU Xen FV Machine
+ *
+ * Copyright (c) 2003-2007 Fabrice Bellard
+ * Copyright (c) 2007 Red Hat
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw.h"
+#include "pc.h"
+#include "pci.h"
+#include "usb-uhci.h"
+#include "net.h"
+#include "boards.h"
+#include "ide.h"
+#include "sysemu.h"
+#include "blockdev.h"
+
+#include "xen_common.h"
+#include "xen/hvm/hvm_info_table.h"
+
+#define MAX_IDE_BUS 2
+
+static void xen_init_fv(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ int i;
+ ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
+ PCIBus *pci_bus;
+ PCII440FXState *i440fx_state;
+ int piix3_devfn = -1;
+ qemu_irq *cpu_irq;
+ qemu_irq *isa_irq;
+ qemu_irq *i8259;
+ qemu_irq *cmos_s3;
+ qemu_irq *smi_irq;
+ IsaIrqState *isa_irq_state;
+ DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+ FDCtrl *floppy_controller;
+ BusState *idebus[MAX_IDE_BUS];
+ ISADevice *rtc_state;
+
+ CPUState *env;
+
+ /* Initialize a dummy CPU */
+ if (cpu_model == NULL) {
+#ifdef TARGET_X86_64
+ cpu_model = "qemu64";
+#else
+ cpu_model = "qemu32";
+#endif
+ }
+ env = cpu_init(cpu_model);
+ env->halted = 1;
+
+ cpu_irq = pc_allocate_cpu_irq();
+ i8259 = i8259_init(cpu_irq[0]);
+ isa_irq_state = qemu_mallocz(sizeof (*isa_irq_state));
+ isa_irq_state->i8259 = i8259;
+
+ isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
+
+ pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, isa_irq, ram_size);
+ isa_bus_irqs(isa_irq);
+
+ pc_register_ferr_irq(isa_reserve_irq(13));
+
+ pc_vga_init(pci_bus);
+
+ /* init basic PC hardware */
+ pc_basic_device_init(isa_irq, &floppy_controller, &rtc_state);
+
+ for (i = 0; i < nb_nics; i++) {
+ NICInfo *nd = &nd_table[i];
+
+ if (nd->model && strcmp(nd->model, "ne2k_isa") == 0)
+ pc_init_ne2k_isa(nd);
+ else
+ pci_nic_init_nofail(nd, "e1000", NULL);
+ }
+
+ if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
+ fprintf(stderr, "qemu: too many IDE bus\n");
+ exit(1);
+ }
+
+ for (i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
+ hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
+ }
+
+ PCIDevice *dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
+ idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
+ idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
+
+ pc_audio_init(pci_bus, isa_irq);
+
+ if (ram_size >= 0xe0000000 ) {
+ above_4g_mem_size = ram_size - 0xe0000000;
+ below_4g_mem_size = 0xe0000000;
+ } else {
+ below_4g_mem_size = ram_size;
+ }
+ pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
+ idebus[0], idebus[1], floppy_controller, rtc_state);
+
+ if (usb_enabled) {
+ usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+ }
+
+ if (acpi_enabled) {
+ cmos_s3 = qemu_allocate_irqs(pc_cmos_set_s3_resume, rtc_state, 1);
+ smi_irq = qemu_allocate_irqs(pc_acpi_smi_interrupt, first_cpu, 1);
+ piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
+ isa_reserve_irq(9), *cmos_s3, *smi_irq,
+ 0);
+ }
+
+ if (i440fx_state) {
+ i440fx_init_memory_mappings(i440fx_state);
+ }
+
+ pc_pci_device_init(pci_bus);
+}
+
+static QEMUMachine xenfv_machine = {
+ .name = "xenfv",
+ .desc = "Xen Fully-virtualized PC",
+ .init = xen_init_fv,
+ .max_cpus = HVM_MAX_VCPUS,
+};
+
+static void xenfv_machine_init(void)
+{
+ qemu_register_machine(&xenfv_machine);
+}
+
+machine_init(xenfv_machine_init);
--
1.6.5
next prev parent reply other threads:[~2010-09-28 15:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-28 15:01 [Qemu-devel] [PATCH RFC V4 00/14] xen device model support anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 01/14] xen: Replace some tab-indents with spaces (clean-up) anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 02/14] xen: Support new libxc calls from xen unstable anthony.perard
2010-09-28 15:01 ` anthony.perard [this message]
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 04/14] Introduce -accel command option anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 05/14] xen: Add xen in -accel option anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 06/14] xen: Add the Xen platform pci device anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 07/14] piix_pci: Introduces Xen specific call for irq anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 08/14] xen: add a 8259 Interrupt Controller anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 09/14] xen: Introduce the Xen mapcache anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 10/14] Introduce qemu_ram_ptr_unlock anthony.perard
2010-09-28 15:14 ` [Qemu-devel] " Anthony Liguori
2010-09-28 15:25 ` Stefano Stabellini
2010-09-28 16:01 ` Anthony Liguori
2010-09-28 18:04 ` Stefano Stabellini
2010-09-29 7:38 ` Gerd Hoffmann
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 11/14] vl.c: Introduce getter for shutdown_requested and reset_requested anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 12/14] xen: Initialize event channels and io rings anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 13/14] xen: Set running state in xenstore anthony.perard
2010-09-28 15:01 ` [Qemu-devel] [PATCH RFC V4 14/14] xen: Add a Xen specific ACPI Implementation to target-xen anthony.perard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285686097-13036-4-git-send-email-anthony.perard@citrix.com \
--to=anthony.perard@citrix.com \
--cc=qemu-devel@nongnu.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).