* [Qemu-devel] No Virtual Console @ 2010-11-11 5:49 qemu 2010-11-11 17:02 ` Mulyadi Santosa 0 siblings, 1 reply; 7+ messages in thread From: qemu @ 2010-11-11 5:49 UTC (permalink / raw) To: qemu-devel [-- Attachment #1: Type: text/plain, Size: 786 bytes --] Hi, My apologies up front for the dumb question, but ... I am running qemu (actually, qemu-system-arm), and when I launch it I do not get a new virtual console to open. I have had this in the past (older Linux install), but inside OpenSuSE 11.3, with QEMU 0.12.5 or 0.13.0 I do not get this to happen (automatically, or even with -serial vc or -monitor vc options). It's likely me doing something wrong, but ... how do I get this console? I am able to use -vnc :0 to get vnc access, but I would like a console window to open automatically on launch. Also, by default I get a vnc server on "::1:5900" ... but what does that mean (or rather, how do I access this vnc server?)? I can manually use -vnc :0 and can make it work, but not sure what the default server is really doing. Thanks! [-- Attachment #2: Type: text/html, Size: 1026 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] No Virtual Console 2010-11-11 5:49 [Qemu-devel] No Virtual Console qemu @ 2010-11-11 17:02 ` Mulyadi Santosa 2010-11-11 20:30 ` Russell Morris 0 siblings, 1 reply; 7+ messages in thread From: Mulyadi Santosa @ 2010-11-11 17:02 UTC (permalink / raw) To: qemu; +Cc: qemu-devel On Thu, Nov 11, 2010 at 12:49, <qemu@rkmorris.us> wrote: > Hi, My apologies up front for the dumb question, but ... I am running qemu > (actually, qemu-system-arm), and when I launch it I do not get a new virtual > console to open. I have had this in the past (older Linux install), but > inside OpenSuSE 11.3, with QEMU 0.12.5 or 0.13.0 I do not get this to happen > (automatically, or even with -serial vc or -monitor vc options). My wild guess is, there is no "(m)getty"s prepared in tty. Thus you only left with xdm/kdm/gdm...but that's assuming you're inside runlevel 5 (or in some distros, runlevel 2 or 3), which boots straight to X. So, my advice is: kindly check /etc/inittab PS: regarding the VNC server listening, try to connect to it using VNC client. (hopefully I understand your statements correctly) -- regards, Mulyadi Santosa Freelance Linux trainer and consultant blog: the-hydra.blogspot.com training: mulyaditraining.blogspot.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] No Virtual Console 2010-11-11 17:02 ` Mulyadi Santosa @ 2010-11-11 20:30 ` Russell Morris 2010-11-12 6:18 ` Mulyadi Santosa 0 siblings, 1 reply; 7+ messages in thread From: Russell Morris @ 2010-11-11 20:30 UTC (permalink / raw) To: Mulyadi Santosa; +Cc: qemu-devel [-- Attachment #1: Type: text/plain, Size: 1552 bytes --] Hi, Yes, I am in runlevel 5. I have to admit, I did check /etc/inittab, but I'm not sure what I'm looking for ... :-(. A bit lost here as to what you're saying, sorry! Can you clarify a bit? Yes, VNC works - I was trying to say that, just not very clearly. What I'm after though is to have a separate window open when I launch qemu, which is the "target" OS ... make sense? Thanks for you help! On Thu, Nov 11, 2010 11:02 AM, Mulyadi Santosa <mulyadi.santosa@gmail.com> wrote: > On Thu, Nov 11, 2010 at 12:49, <qemu@rkmorris.us> wrote: > > Hi, My apologies up front for the dumb question, but ... I am running qemu > > (actually, qemu-system-arm), and when I launch it I do not get a new virtual > > console to open. I have had this in the past (older Linux install), but > > inside OpenSuSE 11.3, with QEMU 0.12.5 or 0.13.0 I do not get this to happen > > (automatically, or even with -serial vc or -monitor vc options). > > My wild guess is, there is no "(m)getty"s prepared in tty. Thus you > only left with xdm/kdm/gdm...but that's assuming you're inside > runlevel 5 (or in some distros, runlevel 2 or 3), which boots straight > to X. > > So, my advice is: kindly check /etc/inittab > > PS: regarding the VNC server listening, try to connect to it using VNC > client. (hopefully I understand your statements correctly) > > -- > regards, > > Mulyadi Santosa > Freelance Linux trainer and consultant > > blog: the-hydra.blogspot.com > training: mulyaditraining.blogspot.com > [-- Attachment #2: Type: text/html, Size: 2171 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] No Virtual Console 2010-11-11 20:30 ` Russell Morris @ 2010-11-12 6:18 ` Mulyadi Santosa 2010-11-12 9:49 ` qemu 0 siblings, 1 reply; 7+ messages in thread From: Mulyadi Santosa @ 2010-11-12 6:18 UTC (permalink / raw) To: Russell Morris; +Cc: qemu-devel Hi... On Fri, Nov 12, 2010 at 03:30, Russell Morris <rmorris@rkmorris.us> wrote: > Hi, > > > > Yes, I am in runlevel 5. I have to admit, I did check /etc/inittab, but I'm > not sure what I'm looking for ... :-(. A bit lost here as to what you're > saying, sorry! Can you clarify a bit? i mean, do you something like below in your /etc/inittab? 1:2345:respawn:/sbin/mingetty tty1 it could be tty2, tty3 and so on...it represents the console number. So it reads "in console 1, in run level 2 up to 5, execute mingetty and make it servicing tty1" > Yes, VNC works - I was trying to say that, just not very clearly. What I'm > after though is to have a separate window open when I launch qemu, which is > the "target" OS ... make sense? I think what you mean here is the standart graphical window, right? the SDL one, right? -- regards, Mulyadi Santosa Freelance Linux trainer and consultant blog: the-hydra.blogspot.com training: mulyaditraining.blogspot.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] No Virtual Console 2010-11-12 6:18 ` Mulyadi Santosa @ 2010-11-12 9:49 ` qemu 2010-11-12 18:03 ` Mulyadi Santosa 0 siblings, 1 reply; 7+ messages in thread From: qemu @ 2010-11-12 9:49 UTC (permalink / raw) To: Mulyadi Santosa; +Cc: qemu-devel [-- Attachment #1: Type: text/plain, Size: 1259 bytes --] Yes - that's it! The SDL window. I can't get it to show up ... any ideas? Thanks! On Fri, Nov 12, 2010 00:18 AM, Mulyadi Santosa <mulyadi.santosa@gmail.com> wrote: > Hi... > > On Fri, Nov 12, 2010 at 03:30, Russell Morris <rmorris@rkmorris.us> wrote: > > Hi, > > > > > > > > Yes, I am in runlevel 5. I have to admit, I did check /etc/inittab, but I'm > > not sure what I'm looking for ... :-(. A bit lost here as to what you're > > saying, sorry! Can you clarify a bit? > > i mean, do you something like below in your /etc/inittab? > 1:2345:respawn:/sbin/mingetty tty1 > > it could be tty2, tty3 and so on...it represents the console number. > So it reads "in console 1, in run level 2 up to 5, execute mingetty > and make it servicing tty1" > > > Yes, VNC works - I was trying to say that, just not very clearly. What I'm > > after though is to have a separate window open when I launch qemu, which is > > the "target" OS ... make sense? > > I think what you mean here is the standart graphical window, right? > the SDL one, right? > > -- > regards, > > Mulyadi Santosa > Freelance Linux trainer and consultant > > blog: the-hydra.blogspot.com > training: mulyaditraining.blogspot.com > > [-- Attachment #2: Type: text/html, Size: 1866 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] No Virtual Console 2010-11-12 9:49 ` qemu @ 2010-11-12 18:03 ` Mulyadi Santosa 2010-11-13 14:30 ` qemu 0 siblings, 1 reply; 7+ messages in thread From: Mulyadi Santosa @ 2010-11-12 18:03 UTC (permalink / raw) To: qemu; +Cc: qemu-devel On Fri, Nov 12, 2010 at 16:49, <qemu@rkmorris.us> wrote: > Yes - that's it! The SDL window. I can't get it to show up ... any ideas? make sure you have "SDL" package installed. Also, if you compile Qemu by your own, please install "SDL-devel" package before ./configure and make. -- regards, Mulyadi Santosa Freelance Linux trainer and consultant blog: the-hydra.blogspot.com training: mulyaditraining.blogspot.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] No Virtual Console 2010-11-12 18:03 ` Mulyadi Santosa @ 2010-11-13 14:30 ` qemu 0 siblings, 0 replies; 7+ messages in thread From: qemu @ 2010-11-13 14:30 UTC (permalink / raw) To: Mulyadi Santosa; +Cc: qemu-devel [-- Attachment #1: Type: text/plain, Size: 720 bytes --] That's the problem - thanks!!! Now I just need to figure out how to log all the Linux boot info to a file. Take care, ... Russell On Fri, Nov 12, 2010 12:03 PM, Mulyadi Santosa <mulyadi.santosa@gmail.com> wrote: > On Fri, Nov 12, 2010 at 16:49, <qemu@rkmorris.us> wrote: > > Yes - that's it! The SDL window. I can't get it to show up ... any ideas? > > make sure you have "SDL" package installed. Also, if you compile Qemu > by your own, please install "SDL-devel" package before ./configure and > make. > > -- > regards, > > Mulyadi Santosa > Freelance Linux trainer and consultant > > blog: the-hydra.blogspot.com > training: mulyaditraining.blogspot.com > [-- Attachment #2: Type: text/html, Size: 1327 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-11-13 14:30 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-11-11 5:49 [Qemu-devel] No Virtual Console qemu 2010-11-11 17:02 ` Mulyadi Santosa 2010-11-11 20:30 ` Russell Morris 2010-11-12 6:18 ` Mulyadi Santosa 2010-11-12 9:49 ` qemu 2010-11-12 18:03 ` Mulyadi Santosa 2010-11-13 14:30 ` qemu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).