From: Alon Levy <alevy@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 0/6] usb-ccid (v7)
Date: Thu, 25 Nov 2010 18:22:44 +0200 [thread overview]
Message-ID: <1290702170-3775-1-git-send-email-alevy@redhat.com> (raw)
This patchset adds three new devices, usb-ccid, ccid-card-passthru and
ccid-card-emulated, providing a CCID bus, a simple passthru protocol
implementing card requiring a client, and a standalone emulated card.
It also introduces a new directory libcaccard with CAC card emulation,
CAC is a type of ISO 7816 smart card.
v6->v7 changes:
* external libcaccard became internal directory libcaccard
* statically link object files into qemu
* produce libcaccard.so for usage by external projects
* applied coding style to new code (please check me)
- did not use the qemu options parsing for libcaccard, since
it seems to draw large amounts of qemu code (monitor for instance).
v5->v6 changes:
* really remove static debug (I apologize for claiming to have done so before)
v4->v5 changes:
* rebased to latest
* remove static debug in card devices
* fix --enable-smartcard to link
* stall instead of assert when exceeding BULK_OUT_DATA_SIZE
* make ccid_reserve_recv_buf for too large len discard message, not exit
* make ccid_reserve_recv_buf return void*
* fix typo
* remove commented code in VMState
v3->v4:
* remove ccid field in CCIDBus
* remove static debug in bus
* add back docs
v2->v3:
* split into bus (usb-ccid.c, uses ccid.h) and card (ccid-card-passthru.c).
* removed documentation (being revised).
v1->v2:
* all QSIMPLEQ turned into fixed sized rings
* all allocated buffers turned into fixed size buffers
* added migration support
* added a message to tell client qemu has migrated to ip:port
* for lack of monitor commands ip:port are 0:0, which causes the updated
vscclient to connect to one port higher on the same host. will add monitor
commands in a separate patch. tested with current setup.
Alon Levy (5):
usb-ccid: add CCID bus
ccid: add passthru card device
libcaccard: update configure to build and use internal libcaccard
add ccid-card-emulated device (v2)
ccid: add docs
Robert Relyea (1):
libcaccard: initial commit after coding style fixes
Makefile | 6 +-
Makefile.objs | 6 +
Makefile.target | 2 +
configure | 36 ++
docs/ccid.txt | 125 ++++
docs/libcaccard.txt | 482 +++++++++++++++
hw/ccid-card-emulated.c | 492 ++++++++++++++++
hw/ccid-card-passthru.c | 277 +++++++++
hw/ccid.h | 34 ++
hw/usb-ccid.c | 1342 ++++++++++++++++++++++++++++++++++++++++++
hw/vscard_common.h | 130 ++++
libcaccard/Makefile | 18 +
libcaccard/cac.c | 411 +++++++++++++
libcaccard/cac.h | 20 +
libcaccard/card_7816.c | 780 ++++++++++++++++++++++++
libcaccard/card_7816.h | 60 ++
libcaccard/card_7816t.h | 163 +++++
libcaccard/config.h | 81 +++
libcaccard/event.c | 112 ++++
libcaccard/eventt.h | 28 +
libcaccard/link_test.c | 20 +
libcaccard/mutex.h | 59 ++
libcaccard/passthru.c | 608 +++++++++++++++++++
libcaccard/passthru.h | 50 ++
libcaccard/vcard.c | 350 +++++++++++
libcaccard/vcard.h | 85 +++
libcaccard/vcard_emul.h | 59 ++
libcaccard/vcard_emul_nss.c | 1147 ++++++++++++++++++++++++++++++++++++
libcaccard/vcard_emul_type.c | 60 ++
libcaccard/vcard_emul_type.h | 29 +
libcaccard/vcardt.h | 66 ++
libcaccard/vevent.h | 26 +
libcaccard/vreader.c | 515 ++++++++++++++++
libcaccard/vreader.h | 53 ++
libcaccard/vreadert.h | 23 +
libcaccard/vscard_common.h | 131 ++++
libcaccard/vscclient.c | 710 ++++++++++++++++++++++
37 files changed, 8594 insertions(+), 2 deletions(-)
create mode 100644 docs/ccid.txt
create mode 100644 docs/libcaccard.txt
create mode 100644 hw/ccid-card-emulated.c
create mode 100644 hw/ccid-card-passthru.c
create mode 100644 hw/ccid.h
create mode 100644 hw/usb-ccid.c
create mode 100644 hw/vscard_common.h
create mode 100644 libcaccard/Makefile
create mode 100644 libcaccard/cac.c
create mode 100644 libcaccard/cac.h
create mode 100644 libcaccard/card_7816.c
create mode 100644 libcaccard/card_7816.h
create mode 100644 libcaccard/card_7816t.h
create mode 100644 libcaccard/config.h
create mode 100644 libcaccard/event.c
create mode 100644 libcaccard/eventt.h
create mode 100644 libcaccard/link_test.c
create mode 100644 libcaccard/mutex.h
create mode 100644 libcaccard/passthru.c
create mode 100644 libcaccard/passthru.h
create mode 100644 libcaccard/vcard.c
create mode 100644 libcaccard/vcard.h
create mode 100644 libcaccard/vcard_emul.h
create mode 100644 libcaccard/vcard_emul_nss.c
create mode 100644 libcaccard/vcard_emul_type.c
create mode 100644 libcaccard/vcard_emul_type.h
create mode 100644 libcaccard/vcardt.h
create mode 100644 libcaccard/vevent.h
create mode 100644 libcaccard/vreader.c
create mode 100644 libcaccard/vreader.h
create mode 100644 libcaccard/vreadert.h
create mode 100644 libcaccard/vscard_common.h
create mode 100644 libcaccard/vscclient.c
--
1.7.3.2
next reply other threads:[~2010-11-25 16:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-25 16:22 Alon Levy [this message]
2010-11-25 16:22 ` [Qemu-devel] [PATCH 1/6] usb-ccid: add CCID bus Alon Levy
2010-11-26 19:05 ` Blue Swirl
2010-11-28 9:58 ` Alon Levy
2010-11-28 10:53 ` Alon Levy
2010-11-28 12:10 ` Blue Swirl
2010-11-25 16:22 ` [Qemu-devel] [PATCH 2/6] ccid: add passthru card device Alon Levy
2010-11-25 16:22 ` [Qemu-devel] [PATCH 3/6] libcaccard: initial commit after coding style fixes Alon Levy
2010-11-25 16:22 ` [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard Alon Levy
2010-11-26 18:50 ` Blue Swirl
2010-11-28 9:14 ` Alon Levy
2010-11-28 9:42 ` Blue Swirl
2010-11-28 10:44 ` Alon Levy
2010-11-28 12:03 ` Blue Swirl
2010-11-28 12:06 ` Alon Levy
2010-11-25 16:22 ` [Qemu-devel] [PATCH 5/6] add ccid-card-emulated device (v2) Alon Levy
2010-11-25 16:22 ` [Qemu-devel] [PATCH 6/6] ccid: add docs Alon Levy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290702170-3775-1-git-send-email-alevy@redhat.com \
--to=alevy@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).