* [Qemu-devel] [PATCH v6 1/5] docs: Add QED image format specification
2010-12-06 16:07 [Qemu-devel] [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Stefan Hajnoczi
@ 2010-12-06 16:07 ` Stefan Hajnoczi
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 2/5] qed: Add QEMU Enhanced Disk image format Stefan Hajnoczi
` (4 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Stefan Hajnoczi @ 2010-12-06 16:07 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Anthony Liguori, Avi Kivity, Stefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
docs/specs/qed_spec.txt | 130 +++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 130 insertions(+), 0 deletions(-)
create mode 100644 docs/specs/qed_spec.txt
diff --git a/docs/specs/qed_spec.txt b/docs/specs/qed_spec.txt
new file mode 100644
index 0000000..1d5fa87
--- /dev/null
+++ b/docs/specs/qed_spec.txt
@@ -0,0 +1,130 @@
+=Specification=
+
+The file format looks like this:
+
+ +----------+----------+----------+-----+
+ | cluster0 | cluster1 | cluster2 | ... |
+ +----------+----------+----------+-----+
+
+The first cluster begins with the '''header'''. The header contains information about where regular clusters start; this allows the header to be extensible and store extra information about the image file. A regular cluster may be a '''data cluster''', an '''L2''', or an '''L1 table'''. L1 and L2 tables are composed of one or more contiguous clusters.
+
+Normally the file size will be a multiple of the cluster size. If the file size is not a multiple, extra information after the last cluster may not be preserved if data is written. Legitimate extra information should use space between the header and the first regular cluster.
+
+All fields are little-endian.
+
+==Header==
+ Header {
+ uint32_t magic; /* QED\0 */
+
+ uint32_t cluster_size; /* in bytes */
+ uint32_t table_size; /* for L1 and L2 tables, in clusters */
+ uint32_t header_size; /* in clusters */
+
+ uint64_t features; /* format feature bits */
+ uint64_t compat_features; /* compat feature bits */
+ uint64_t autoclear_features; /* self-resetting feature bits */
+
+ uint64_t l1_table_offset; /* in bytes */
+ uint64_t image_size; /* total logical image size, in bytes */
+
+ /* if (features & QED_F_BACKING_FILE) */
+ uint32_t backing_filename_offset; /* in bytes from start of header */
+ uint32_t backing_filename_size; /* in bytes */
+ }
+
+Field descriptions:
+* ''cluster_size'' must be a power of 2 in range [2^12, 2^26].
+* ''table_size'' must be a power of 2 in range [1, 16].
+* ''header_size'' is the number of clusters used by the header and any additional information stored before regular clusters.
+* ''features'', ''compat_features'', and ''autoclear_features'' are file format extension bitmaps. They work as follows:
+** An image with unknown ''features'' bits enabled must not be opened. File format changes that are not backwards-compatible must use ''features'' bits.
+** An image with unknown ''compat_features'' bits enabled can be opened safely. The unknown features are simply ignored and represent backwards-compatible changes to the file format.
+** An image with unknown ''autoclear_features'' bits enable can be opened safely after clearing the unknown bits. This allows for backwards-compatible changes to the file format which degrade gracefully and can be re-enabled again by a new program later.
+* ''l1_table_offset'' is the offset of the first byte of the L1 table in the image file and must be a multiple of ''cluster_size''.
+* ''image_size'' is the block device size seen by the guest and must be a multiple of 512 bytes.
+* ''backing_filename_offset'' and ''backing_filename_size'' describe a string in (byte offset, byte size) form. It is not NUL-terminated and has no alignment constraints. The string must be stored within the first ''header_size'' clusters. The backing filename may be an absolute path or relative to the image file.
+
+Feature bits:
+* QED_F_BACKING_FILE = 0x01. The image uses a backing file.
+* QED_F_NEED_CHECK = 0x02. The image needs a consistency check before use.
+* QED_F_BACKING_FORMAT_NO_PROBE = 0x04. The backing file is a raw disk image and no file format autodetection should be attempted. This should be used to ensure that raw backing files are never detected as an image format if they happen to contain magic constants.
+
+There are currently no defined ''compat_features'' or ''autoclear_features'' bits.
+
+Fields predicated on a feature bit are only used when that feature is set. The fields always take up header space, regardless of whether or not the feature bit is set.
+
+==Tables==
+
+Tables provide the translation from logical offsets in the block device to cluster offsets in the file.
+
+ #define TABLE_NOFFSETS (table_size * cluster_size / sizeof(uint64_t))
+
+ Table {
+ uint64_t offsets[TABLE_NOFFSETS];
+ }
+
+The tables are organized as follows:
+
+ +----------+
+ | L1 table |
+ +----------+
+ ,------' | '------.
+ +----------+ | +----------+
+ | L2 table | ... | L2 table |
+ +----------+ +----------+
+ ,------' | '------.
+ +----------+ | +----------+
+ | Data | ... | Data |
+ +----------+ +----------+
+
+A table is made up of one or more contiguous clusters. The table_size header field determines table size for an image file. For example, cluster_size=64 KB and table_size=4 results in 256 KB tables.
+
+The logical image size must be less than or equal to the maximum possible size of clusters rooted by the L1 table:
+ header.image_size <= TABLE_NOFFSETS * TABLE_NOFFSETS * header.cluster_size
+
+L1, L2, and data cluster offsets must be aligned to header.cluster_size. The following offsets have special meanings:
+
+===L2 table offsets===
+* 0 - unallocated. The L2 table is not yet allocated.
+
+===Data cluster offsets===
+* 0 - unallocated. The data cluster is not yet allocated.
+
+Future format extensions may wish to store per-offset information. The least significant 12 bits of an offset are reserved for this purpose and must be set to zero. Image files with cluster_size > 2^12 will have more unused bits which should also be zeroed.
+
+===Unallocated L2 tables and data clusters===
+Reads to an unallocated area of the image file access the backing file. If there is no backing file, then zeroes are produced. The backing file may be smaller than the image file and reads of unallocated areas beyond the end of the backing file produce zeroes.
+
+Writes to an unallocated area cause a new data clusters to be allocated, and a new L2 table if that is also unallocated. The new data cluster is populated with data from the backing file (or zeroes if no backing file) and the data being written.
+
+===Logical offset translation===
+Logical offsets are translated into cluster offsets as follows:
+
+ table_bits table_bits cluster_bits
+ <--------> <--------> <--------------->
+ +----------+----------+-----------------+
+ | L1 index | L2 index | byte offset |
+ +----------+----------+-----------------+
+
+ Structure of a logical offset
+
+ offset_mask = ~(cluster_size - 1) # mask for the image file byte offset
+
+ def logical_to_cluster_offset(l1_index, l2_index, byte_offset):
+ l2_offset = l1_table[l1_index]
+ l2_table = load_table(l2_offset)
+ cluster_offset = l2_table[l2_index] & offset_mask
+ return cluster_offset + byte_offset
+
+==Consistency checking==
+
+This section is informational and included to provide background on the use of the QED_F_NEED_CHECK ''features'' bit.
+
+The QED_F_NEED_CHECK bit is used to mark an image as dirty before starting an operation that could leave the image in an inconsistent state if interrupted by a crash or power failure. A dirty image must be checked on open because its metadata may not be consistent.
+
+Consistency check includes the following invariants:
+# Each cluster is referenced once and only once. It is an inconsistency to have a cluster referenced more than once by L1 or L2 tables. A cluster has been leaked if it has no references.
+# Offsets must be within the image file size and must be ''cluster_size'' aligned.
+# Table offsets must at least ''table_size'' * ''cluster_size'' bytes from the end of the image file so that there is space for the entire table.
+
+The consistency check process starts by from ''l1_table_offset'' and scans all L2 tables. After the check completes with no other errors besides leaks, the QED_F_NEED_CHECK bit can be cleared and the image can be accessed.
--
1.7.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v6 2/5] qed: Add QEMU Enhanced Disk image format
2010-12-06 16:07 [Qemu-devel] [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Stefan Hajnoczi
2010-12-06 16:07 ` [Qemu-devel] [PATCH v6 1/5] docs: Add QED image format specification Stefan Hajnoczi
@ 2010-12-06 16:08 ` Stefan Hajnoczi
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 3/5] qed: Table, L2 cache, and cluster functions Stefan Hajnoczi
` (3 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Stefan Hajnoczi @ 2010-12-06 16:08 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Anthony Liguori, Avi Kivity, Stefan Hajnoczi
This patch introduces the qed on-disk layout and implements image
creation. Later patches add read/write and other functionality.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
Makefile.objs | 1 +
block/qed.c | 554 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
block/qed.h | 148 +++++++++++++++
block_int.h | 1 +
4 files changed, 704 insertions(+), 0 deletions(-)
create mode 100644 block/qed.c
create mode 100644 block/qed.h
diff --git a/Makefile.objs b/Makefile.objs
index 04625eb..f89ce19 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -20,6 +20,7 @@ block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
+block-nested-y += qed.o
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
diff --git a/block/qed.c b/block/qed.c
new file mode 100644
index 0000000..1436ac4
--- /dev/null
+++ b/block/qed.c
@@ -0,0 +1,554 @@
+/*
+ * QEMU Enhanced Disk Format
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "qed.h"
+
+static int bdrv_qed_probe(const uint8_t *buf, int buf_size,
+ const char *filename)
+{
+ const QEDHeader *header = (const QEDHeader *)buf;
+
+ if (buf_size < sizeof(*header)) {
+ return 0;
+ }
+ if (le32_to_cpu(header->magic) != QED_MAGIC) {
+ return 0;
+ }
+ return 100;
+}
+
+/**
+ * Check whether an image format is raw
+ *
+ * @fmt: Backing file format, may be NULL
+ */
+static bool qed_fmt_is_raw(const char *fmt)
+{
+ return fmt && strcmp(fmt, "raw") == 0;
+}
+
+static void qed_header_le_to_cpu(const QEDHeader *le, QEDHeader *cpu)
+{
+ cpu->magic = le32_to_cpu(le->magic);
+ cpu->cluster_size = le32_to_cpu(le->cluster_size);
+ cpu->table_size = le32_to_cpu(le->table_size);
+ cpu->header_size = le32_to_cpu(le->header_size);
+ cpu->features = le64_to_cpu(le->features);
+ cpu->compat_features = le64_to_cpu(le->compat_features);
+ cpu->autoclear_features = le64_to_cpu(le->autoclear_features);
+ cpu->l1_table_offset = le64_to_cpu(le->l1_table_offset);
+ cpu->image_size = le64_to_cpu(le->image_size);
+ cpu->backing_filename_offset = le32_to_cpu(le->backing_filename_offset);
+ cpu->backing_filename_size = le32_to_cpu(le->backing_filename_size);
+}
+
+static void qed_header_cpu_to_le(const QEDHeader *cpu, QEDHeader *le)
+{
+ le->magic = cpu_to_le32(cpu->magic);
+ le->cluster_size = cpu_to_le32(cpu->cluster_size);
+ le->table_size = cpu_to_le32(cpu->table_size);
+ le->header_size = cpu_to_le32(cpu->header_size);
+ le->features = cpu_to_le64(cpu->features);
+ le->compat_features = cpu_to_le64(cpu->compat_features);
+ le->autoclear_features = cpu_to_le64(cpu->autoclear_features);
+ le->l1_table_offset = cpu_to_le64(cpu->l1_table_offset);
+ le->image_size = cpu_to_le64(cpu->image_size);
+ le->backing_filename_offset = cpu_to_le32(cpu->backing_filename_offset);
+ le->backing_filename_size = cpu_to_le32(cpu->backing_filename_size);
+}
+
+static int qed_write_header_sync(BDRVQEDState *s)
+{
+ QEDHeader le;
+ int ret;
+
+ qed_header_cpu_to_le(&s->header, &le);
+ ret = bdrv_pwrite(s->bs->file, 0, &le, sizeof(le));
+ if (ret != sizeof(le)) {
+ return ret;
+ }
+ return 0;
+}
+
+static uint64_t qed_max_image_size(uint32_t cluster_size, uint32_t table_size)
+{
+ uint64_t table_entries;
+ uint64_t l2_size;
+
+ table_entries = (table_size * cluster_size) / sizeof(uint64_t);
+ l2_size = table_entries * cluster_size;
+
+ return l2_size * table_entries;
+}
+
+static bool qed_is_cluster_size_valid(uint32_t cluster_size)
+{
+ if (cluster_size < QED_MIN_CLUSTER_SIZE ||
+ cluster_size > QED_MAX_CLUSTER_SIZE) {
+ return false;
+ }
+ if (cluster_size & (cluster_size - 1)) {
+ return false; /* not power of 2 */
+ }
+ return true;
+}
+
+static bool qed_is_table_size_valid(uint32_t table_size)
+{
+ if (table_size < QED_MIN_TABLE_SIZE ||
+ table_size > QED_MAX_TABLE_SIZE) {
+ return false;
+ }
+ if (table_size & (table_size - 1)) {
+ return false; /* not power of 2 */
+ }
+ return true;
+}
+
+static bool qed_is_image_size_valid(uint64_t image_size, uint32_t cluster_size,
+ uint32_t table_size)
+{
+ if (image_size % BDRV_SECTOR_SIZE != 0) {
+ return false; /* not multiple of sector size */
+ }
+ if (image_size > qed_max_image_size(cluster_size, table_size)) {
+ return false; /* image is too large */
+ }
+ return true;
+}
+
+/**
+ * Read a string of known length from the image file
+ *
+ * @file: Image file
+ * @offset: File offset to start of string, in bytes
+ * @n: String length in bytes
+ * @buf: Destination buffer
+ * @buflen: Destination buffer length in bytes
+ * @ret: 0 on success, -errno on failure
+ *
+ * The string is NUL-terminated.
+ */
+static int qed_read_string(BlockDriverState *file, uint64_t offset, size_t n,
+ char *buf, size_t buflen)
+{
+ int ret;
+ if (n >= buflen) {
+ return -EINVAL;
+ }
+ ret = bdrv_pread(file, offset, buf, n);
+ if (ret < 0) {
+ return ret;
+ }
+ buf[n] = '\0';
+ return 0;
+}
+
+static int bdrv_qed_open(BlockDriverState *bs, int flags)
+{
+ BDRVQEDState *s = bs->opaque;
+ QEDHeader le_header;
+ int64_t file_size;
+ int ret;
+
+ s->bs = bs;
+
+ ret = bdrv_pread(bs->file, 0, &le_header, sizeof(le_header));
+ if (ret < 0) {
+ return ret;
+ }
+ ret = 0; /* ret should always be 0 or -errno */
+ qed_header_le_to_cpu(&le_header, &s->header);
+
+ if (s->header.magic != QED_MAGIC) {
+ return -EINVAL;
+ }
+ if (s->header.features & ~QED_FEATURE_MASK) {
+ return -ENOTSUP; /* image uses unsupported feature bits */
+ }
+ if (!qed_is_cluster_size_valid(s->header.cluster_size)) {
+ return -EINVAL;
+ }
+
+ /* Round down file size to the last cluster */
+ file_size = bdrv_getlength(bs->file);
+ if (file_size < 0) {
+ return file_size;
+ }
+ s->file_size = qed_start_of_cluster(s, file_size);
+
+ if (!qed_is_table_size_valid(s->header.table_size)) {
+ return -EINVAL;
+ }
+ if (!qed_is_image_size_valid(s->header.image_size,
+ s->header.cluster_size,
+ s->header.table_size)) {
+ return -EINVAL;
+ }
+ if (!qed_check_table_offset(s, s->header.l1_table_offset)) {
+ return -EINVAL;
+ }
+
+ s->table_nelems = (s->header.cluster_size * s->header.table_size) /
+ sizeof(uint64_t);
+ s->l2_shift = ffs(s->header.cluster_size) - 1;
+ s->l2_mask = s->table_nelems - 1;
+ s->l1_shift = s->l2_shift + ffs(s->table_nelems) - 1;
+
+ if ((s->header.features & QED_F_BACKING_FILE)) {
+ if ((uint64_t)s->header.backing_filename_offset +
+ s->header.backing_filename_size >
+ s->header.cluster_size * s->header.header_size) {
+ return -EINVAL;
+ }
+
+ ret = qed_read_string(bs->file, s->header.backing_filename_offset,
+ s->header.backing_filename_size, bs->backing_file,
+ sizeof(bs->backing_file));
+ if (ret < 0) {
+ return ret;
+ }
+
+ if (s->header.features & QED_F_BACKING_FORMAT_NO_PROBE) {
+ pstrcpy(bs->backing_format, sizeof(bs->backing_format), "raw");
+ }
+ }
+
+ /* Reset unknown autoclear feature bits. This is a backwards
+ * compatibility mechanism that allows images to be opened by older
+ * programs, which "knock out" unknown feature bits. When an image is
+ * opened by a newer program again it can detect that the autoclear
+ * feature is no longer valid.
+ */
+ if ((s->header.autoclear_features & ~QED_AUTOCLEAR_FEATURE_MASK) != 0 &&
+ !bdrv_is_read_only(bs->file)) {
+ s->header.autoclear_features &= QED_AUTOCLEAR_FEATURE_MASK;
+
+ ret = qed_write_header_sync(s);
+ if (ret) {
+ return ret;
+ }
+
+ /* From here on only known autoclear feature bits are valid */
+ bdrv_flush(bs->file);
+ }
+
+ return ret;
+}
+
+static void bdrv_qed_close(BlockDriverState *bs)
+{
+}
+
+static int bdrv_qed_flush(BlockDriverState *bs)
+{
+ return bdrv_flush(bs->file);
+}
+
+static int qed_create(const char *filename, uint32_t cluster_size,
+ uint64_t image_size, uint32_t table_size,
+ const char *backing_file, const char *backing_fmt)
+{
+ QEDHeader header = {
+ .magic = QED_MAGIC,
+ .cluster_size = cluster_size,
+ .table_size = table_size,
+ .header_size = 1,
+ .features = 0,
+ .compat_features = 0,
+ .l1_table_offset = cluster_size,
+ .image_size = image_size,
+ };
+ QEDHeader le_header;
+ uint8_t *l1_table = NULL;
+ size_t l1_size = header.cluster_size * header.table_size;
+ int ret = 0;
+ BlockDriverState *bs = NULL;
+
+ ret = bdrv_create_file(filename, NULL);
+ if (ret < 0) {
+ return ret;
+ }
+
+ ret = bdrv_file_open(&bs, filename, BDRV_O_RDWR | BDRV_O_CACHE_WB);
+ if (ret < 0) {
+ return ret;
+ }
+
+ if (backing_file) {
+ header.features |= QED_F_BACKING_FILE;
+ header.backing_filename_offset = sizeof(le_header);
+ header.backing_filename_size = strlen(backing_file);
+
+ if (qed_fmt_is_raw(backing_fmt)) {
+ header.features |= QED_F_BACKING_FORMAT_NO_PROBE;
+ }
+ }
+
+ qed_header_cpu_to_le(&header, &le_header);
+ ret = bdrv_pwrite(bs, 0, &le_header, sizeof(le_header));
+ if (ret < 0) {
+ goto out;
+ }
+ ret = bdrv_pwrite(bs, sizeof(le_header), backing_file,
+ header.backing_filename_size);
+ if (ret < 0) {
+ goto out;
+ }
+
+ l1_table = qemu_mallocz(l1_size);
+ ret = bdrv_pwrite(bs, header.l1_table_offset, l1_table, l1_size);
+ if (ret < 0) {
+ goto out;
+ }
+
+ ret = 0; /* success */
+out:
+ qemu_free(l1_table);
+ bdrv_delete(bs);
+ return ret;
+}
+
+static int bdrv_qed_create(const char *filename, QEMUOptionParameter *options)
+{
+ uint64_t image_size = 0;
+ uint32_t cluster_size = QED_DEFAULT_CLUSTER_SIZE;
+ uint32_t table_size = QED_DEFAULT_TABLE_SIZE;
+ const char *backing_file = NULL;
+ const char *backing_fmt = NULL;
+
+ while (options && options->name) {
+ if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
+ image_size = options->value.n;
+ } else if (!strcmp(options->name, BLOCK_OPT_BACKING_FILE)) {
+ backing_file = options->value.s;
+ } else if (!strcmp(options->name, BLOCK_OPT_BACKING_FMT)) {
+ backing_fmt = options->value.s;
+ } else if (!strcmp(options->name, BLOCK_OPT_CLUSTER_SIZE)) {
+ if (options->value.n) {
+ cluster_size = options->value.n;
+ }
+ } else if (!strcmp(options->name, BLOCK_OPT_TABLE_SIZE)) {
+ if (options->value.n) {
+ table_size = options->value.n;
+ }
+ }
+ options++;
+ }
+
+ if (!qed_is_cluster_size_valid(cluster_size)) {
+ fprintf(stderr, "QED cluster size must be within range [%u, %u] and power of 2\n",
+ QED_MIN_CLUSTER_SIZE, QED_MAX_CLUSTER_SIZE);
+ return -EINVAL;
+ }
+ if (!qed_is_table_size_valid(table_size)) {
+ fprintf(stderr, "QED table size must be within range [%u, %u] and power of 2\n",
+ QED_MIN_TABLE_SIZE, QED_MAX_TABLE_SIZE);
+ return -EINVAL;
+ }
+ if (!qed_is_image_size_valid(image_size, cluster_size, table_size)) {
+ fprintf(stderr, "QED image size must be a non-zero multiple of "
+ "cluster size and less than %" PRIu64 " bytes\n",
+ qed_max_image_size(cluster_size, table_size));
+ return -EINVAL;
+ }
+
+ return qed_create(filename, cluster_size, image_size, table_size,
+ backing_file, backing_fmt);
+}
+
+static int bdrv_qed_is_allocated(BlockDriverState *bs, int64_t sector_num,
+ int nb_sectors, int *pnum)
+{
+ return -ENOTSUP;
+}
+
+static int bdrv_qed_make_empty(BlockDriverState *bs)
+{
+ return -ENOTSUP;
+}
+
+static BlockDriverAIOCB *bdrv_qed_aio_readv(BlockDriverState *bs,
+ int64_t sector_num,
+ QEMUIOVector *qiov, int nb_sectors,
+ BlockDriverCompletionFunc *cb,
+ void *opaque)
+{
+ return NULL;
+}
+
+static BlockDriverAIOCB *bdrv_qed_aio_writev(BlockDriverState *bs,
+ int64_t sector_num,
+ QEMUIOVector *qiov, int nb_sectors,
+ BlockDriverCompletionFunc *cb,
+ void *opaque)
+{
+ return NULL;
+}
+
+static BlockDriverAIOCB *bdrv_qed_aio_flush(BlockDriverState *bs,
+ BlockDriverCompletionFunc *cb,
+ void *opaque)
+{
+ return bdrv_aio_flush(bs->file, cb, opaque);
+}
+
+static int bdrv_qed_truncate(BlockDriverState *bs, int64_t offset)
+{
+ return -ENOTSUP;
+}
+
+static int64_t bdrv_qed_getlength(BlockDriverState *bs)
+{
+ BDRVQEDState *s = bs->opaque;
+ return s->header.image_size;
+}
+
+static int bdrv_qed_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
+{
+ BDRVQEDState *s = bs->opaque;
+
+ memset(bdi, 0, sizeof(*bdi));
+ bdi->cluster_size = s->header.cluster_size;
+ return 0;
+}
+
+static int bdrv_qed_change_backing_file(BlockDriverState *bs,
+ const char *backing_file,
+ const char *backing_fmt)
+{
+ BDRVQEDState *s = bs->opaque;
+ QEDHeader new_header, le_header;
+ void *buffer;
+ size_t buffer_len, backing_file_len;
+ int ret;
+
+ /* Refuse to set backing filename if unknown compat feature bits are
+ * active. If the image uses an unknown compat feature then we may not
+ * know the layout of data following the header structure and cannot safely
+ * add a new string.
+ */
+ if (backing_file && (s->header.compat_features &
+ ~QED_COMPAT_FEATURE_MASK)) {
+ return -ENOTSUP;
+ }
+
+ memcpy(&new_header, &s->header, sizeof(new_header));
+
+ new_header.features &= ~(QED_F_BACKING_FILE |
+ QED_F_BACKING_FORMAT_NO_PROBE);
+
+ /* Adjust feature flags */
+ if (backing_file) {
+ new_header.features |= QED_F_BACKING_FILE;
+
+ if (qed_fmt_is_raw(backing_fmt)) {
+ new_header.features |= QED_F_BACKING_FORMAT_NO_PROBE;
+ }
+ }
+
+ /* Calculate new header size */
+ backing_file_len = 0;
+
+ if (backing_file) {
+ backing_file_len = strlen(backing_file);
+ }
+
+ buffer_len = sizeof(new_header);
+ new_header.backing_filename_offset = buffer_len;
+ new_header.backing_filename_size = backing_file_len;
+ buffer_len += backing_file_len;
+
+ /* Make sure we can rewrite header without failing */
+ if (buffer_len > new_header.header_size * new_header.cluster_size) {
+ return -ENOSPC;
+ }
+
+ /* Prepare new header */
+ buffer = qemu_malloc(buffer_len);
+
+ qed_header_cpu_to_le(&new_header, &le_header);
+ memcpy(buffer, &le_header, sizeof(le_header));
+ buffer_len = sizeof(le_header);
+
+ memcpy(buffer + buffer_len, backing_file, backing_file_len);
+ buffer_len += backing_file_len;
+
+ /* Write new header */
+ ret = bdrv_pwrite_sync(bs->file, 0, buffer, buffer_len);
+ qemu_free(buffer);
+ if (ret == 0) {
+ memcpy(&s->header, &new_header, sizeof(new_header));
+ }
+ return ret;
+}
+
+static int bdrv_qed_check(BlockDriverState *bs, BdrvCheckResult *result)
+{
+ return -ENOTSUP;
+}
+
+static QEMUOptionParameter qed_create_options[] = {
+ {
+ .name = BLOCK_OPT_SIZE,
+ .type = OPT_SIZE,
+ .help = "Virtual disk size (in bytes)"
+ }, {
+ .name = BLOCK_OPT_BACKING_FILE,
+ .type = OPT_STRING,
+ .help = "File name of a base image"
+ }, {
+ .name = BLOCK_OPT_BACKING_FMT,
+ .type = OPT_STRING,
+ .help = "Image format of the base image"
+ }, {
+ .name = BLOCK_OPT_CLUSTER_SIZE,
+ .type = OPT_SIZE,
+ .help = "Cluster size (in bytes)"
+ }, {
+ .name = BLOCK_OPT_TABLE_SIZE,
+ .type = OPT_SIZE,
+ .help = "L1/L2 table size (in clusters)"
+ },
+ { /* end of list */ }
+};
+
+static BlockDriver bdrv_qed = {
+ .format_name = "qed",
+ .instance_size = sizeof(BDRVQEDState),
+ .create_options = qed_create_options,
+
+ .bdrv_probe = bdrv_qed_probe,
+ .bdrv_open = bdrv_qed_open,
+ .bdrv_close = bdrv_qed_close,
+ .bdrv_create = bdrv_qed_create,
+ .bdrv_flush = bdrv_qed_flush,
+ .bdrv_is_allocated = bdrv_qed_is_allocated,
+ .bdrv_make_empty = bdrv_qed_make_empty,
+ .bdrv_aio_readv = bdrv_qed_aio_readv,
+ .bdrv_aio_writev = bdrv_qed_aio_writev,
+ .bdrv_aio_flush = bdrv_qed_aio_flush,
+ .bdrv_truncate = bdrv_qed_truncate,
+ .bdrv_getlength = bdrv_qed_getlength,
+ .bdrv_get_info = bdrv_qed_get_info,
+ .bdrv_change_backing_file = bdrv_qed_change_backing_file,
+ .bdrv_check = bdrv_qed_check,
+};
+
+static void bdrv_qed_init(void)
+{
+ bdrv_register(&bdrv_qed);
+}
+
+block_init(bdrv_qed_init);
diff --git a/block/qed.h b/block/qed.h
new file mode 100644
index 0000000..1f8a125
--- /dev/null
+++ b/block/qed.h
@@ -0,0 +1,148 @@
+/*
+ * QEMU Enhanced Disk Format
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#ifndef BLOCK_QED_H
+#define BLOCK_QED_H
+
+#include "block_int.h"
+
+/* The layout of a QED file is as follows:
+ *
+ * +--------+----------+----------+----------+-----+
+ * | header | L1 table | cluster0 | cluster1 | ... |
+ * +--------+----------+----------+----------+-----+
+ *
+ * There is a 2-level pagetable for cluster allocation:
+ *
+ * +----------+
+ * | L1 table |
+ * +----------+
+ * ,------' | '------.
+ * +----------+ | +----------+
+ * | L2 table | ... | L2 table |
+ * +----------+ +----------+
+ * ,------' | '------.
+ * +----------+ | +----------+
+ * | Data | ... | Data |
+ * +----------+ +----------+
+ *
+ * The L1 table is fixed size and always present. L2 tables are allocated on
+ * demand. The L1 table size determines the maximum possible image size; it
+ * can be influenced using the cluster_size and table_size values.
+ *
+ * All fields are little-endian on disk.
+ */
+
+enum {
+ QED_MAGIC = 'Q' | 'E' << 8 | 'D' << 16 | '\0' << 24,
+
+ /* The image supports a backing file */
+ QED_F_BACKING_FILE = 0x01,
+
+ /* The backing file format must not be probed, treat as raw image */
+ QED_F_BACKING_FORMAT_NO_PROBE = 0x04,
+
+ /* Feature bits must be used when the on-disk format changes */
+ QED_FEATURE_MASK = QED_F_BACKING_FILE | /* supported feature bits */
+ QED_F_BACKING_FORMAT_NO_PROBE,
+ QED_COMPAT_FEATURE_MASK = 0, /* supported compat feature bits */
+ QED_AUTOCLEAR_FEATURE_MASK = 0, /* supported autoclear feature bits */
+
+ /* Data is stored in groups of sectors called clusters. Cluster size must
+ * be large to avoid keeping too much metadata. I/O requests that have
+ * sub-cluster size will require read-modify-write.
+ */
+ QED_MIN_CLUSTER_SIZE = 4 * 1024, /* in bytes */
+ QED_MAX_CLUSTER_SIZE = 64 * 1024 * 1024,
+ QED_DEFAULT_CLUSTER_SIZE = 64 * 1024,
+
+ /* Allocated clusters are tracked using a 2-level pagetable. Table size is
+ * a multiple of clusters so large maximum image sizes can be supported
+ * without jacking up the cluster size too much.
+ */
+ QED_MIN_TABLE_SIZE = 1, /* in clusters */
+ QED_MAX_TABLE_SIZE = 16,
+ QED_DEFAULT_TABLE_SIZE = 4,
+};
+
+typedef struct {
+ uint32_t magic; /* QED\0 */
+
+ uint32_t cluster_size; /* in bytes */
+ uint32_t table_size; /* for L1 and L2 tables, in clusters */
+ uint32_t header_size; /* in clusters */
+
+ uint64_t features; /* format feature bits */
+ uint64_t compat_features; /* compatible feature bits */
+ uint64_t autoclear_features; /* self-resetting feature bits */
+
+ uint64_t l1_table_offset; /* in bytes */
+ uint64_t image_size; /* total logical image size, in bytes */
+
+ /* if (features & QED_F_BACKING_FILE) */
+ uint32_t backing_filename_offset; /* in bytes from start of header */
+ uint32_t backing_filename_size; /* in bytes */
+} QEDHeader;
+
+typedef struct {
+ BlockDriverState *bs; /* device */
+ uint64_t file_size; /* length of image file, in bytes */
+
+ QEDHeader header; /* always cpu-endian */
+ uint32_t table_nelems;
+ uint32_t l1_shift;
+ uint32_t l2_shift;
+ uint32_t l2_mask;
+} BDRVQEDState;
+
+/**
+ * Round down to the start of a cluster
+ */
+static inline uint64_t qed_start_of_cluster(BDRVQEDState *s, uint64_t offset)
+{
+ return offset & ~(uint64_t)(s->header.cluster_size - 1);
+}
+
+/**
+ * Test if a cluster offset is valid
+ */
+static inline bool qed_check_cluster_offset(BDRVQEDState *s, uint64_t offset)
+{
+ uint64_t header_size = (uint64_t)s->header.header_size *
+ s->header.cluster_size;
+
+ if (offset & (s->header.cluster_size - 1)) {
+ return false;
+ }
+ return offset >= header_size && offset < s->file_size;
+}
+
+/**
+ * Test if a table offset is valid
+ */
+static inline bool qed_check_table_offset(BDRVQEDState *s, uint64_t offset)
+{
+ uint64_t end_offset = offset + (s->header.table_size - 1) *
+ s->header.cluster_size;
+
+ /* Overflow check */
+ if (end_offset <= offset) {
+ return false;
+ }
+
+ return qed_check_cluster_offset(s, offset) &&
+ qed_check_cluster_offset(s, end_offset);
+}
+
+#endif /* BLOCK_QED_H */
diff --git a/block_int.h b/block_int.h
index 3c3adb5..069d227 100644
--- a/block_int.h
+++ b/block_int.h
@@ -38,6 +38,7 @@
#define BLOCK_OPT_BACKING_FILE "backing_file"
#define BLOCK_OPT_BACKING_FMT "backing_fmt"
#define BLOCK_OPT_CLUSTER_SIZE "cluster_size"
+#define BLOCK_OPT_TABLE_SIZE "table_size"
#define BLOCK_OPT_PREALLOC "preallocation"
typedef struct AIOPool {
--
1.7.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v6 3/5] qed: Table, L2 cache, and cluster functions
2010-12-06 16:07 [Qemu-devel] [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Stefan Hajnoczi
2010-12-06 16:07 ` [Qemu-devel] [PATCH v6 1/5] docs: Add QED image format specification Stefan Hajnoczi
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 2/5] qed: Add QEMU Enhanced Disk image format Stefan Hajnoczi
@ 2010-12-06 16:08 ` Stefan Hajnoczi
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 4/5] qed: Read/write support Stefan Hajnoczi
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Stefan Hajnoczi @ 2010-12-06 16:08 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Anthony Liguori, Avi Kivity, Stefan Hajnoczi
This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables. The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).
With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
Makefile.objs | 2 +-
block/qed-cluster.c | 154 ++++++++++++++++++++++++
block/qed-gencb.c | 32 +++++
block/qed-l2-cache.c | 173 +++++++++++++++++++++++++++
block/qed-table.c | 319 ++++++++++++++++++++++++++++++++++++++++++++++++++
block/qed.c | 54 +++++++++-
block/qed.h | 123 +++++++++++++++++++
trace-events | 11 ++
8 files changed, 866 insertions(+), 2 deletions(-)
create mode 100644 block/qed-cluster.c
create mode 100644 block/qed-gencb.c
create mode 100644 block/qed-l2-cache.c
create mode 100644 block/qed-table.c
diff --git a/Makefile.objs b/Makefile.objs
index f89ce19..55a046f 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -20,7 +20,7 @@ block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
-block-nested-y += qed.o
+block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
diff --git a/block/qed-cluster.c b/block/qed-cluster.c
new file mode 100644
index 0000000..0ec864b
--- /dev/null
+++ b/block/qed-cluster.c
@@ -0,0 +1,154 @@
+/*
+ * QEMU Enhanced Disk Format Cluster functions
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "qed.h"
+
+/**
+ * Count the number of contiguous data clusters
+ *
+ * @s: QED state
+ * @table: L2 table
+ * @index: First cluster index
+ * @n: Maximum number of clusters
+ * @offset: Set to first cluster offset
+ *
+ * This function scans tables for contiguous allocated or free clusters.
+ */
+static unsigned int qed_count_contiguous_clusters(BDRVQEDState *s,
+ QEDTable *table,
+ unsigned int index,
+ unsigned int n,
+ uint64_t *offset)
+{
+ unsigned int end = MIN(index + n, s->table_nelems);
+ uint64_t last = table->offsets[index];
+ unsigned int i;
+
+ *offset = last;
+
+ for (i = index + 1; i < end; i++) {
+ if (last == 0) {
+ /* Counting free clusters */
+ if (table->offsets[i] != 0) {
+ break;
+ }
+ } else {
+ /* Counting allocated clusters */
+ if (table->offsets[i] != last + s->header.cluster_size) {
+ break;
+ }
+ last = table->offsets[i];
+ }
+ }
+ return i - index;
+}
+
+typedef struct {
+ BDRVQEDState *s;
+ uint64_t pos;
+ size_t len;
+
+ QEDRequest *request;
+
+ /* User callback */
+ QEDFindClusterFunc *cb;
+ void *opaque;
+} QEDFindClusterCB;
+
+static void qed_find_cluster_cb(void *opaque, int ret)
+{
+ QEDFindClusterCB *find_cluster_cb = opaque;
+ BDRVQEDState *s = find_cluster_cb->s;
+ QEDRequest *request = find_cluster_cb->request;
+ uint64_t offset = 0;
+ size_t len = 0;
+ unsigned int index;
+ unsigned int n;
+
+ if (ret) {
+ goto out;
+ }
+
+ index = qed_l2_index(s, find_cluster_cb->pos);
+ n = qed_bytes_to_clusters(s,
+ qed_offset_into_cluster(s, find_cluster_cb->pos) +
+ find_cluster_cb->len);
+ n = qed_count_contiguous_clusters(s, request->l2_table->table,
+ index, n, &offset);
+
+ ret = offset ? QED_CLUSTER_FOUND : QED_CLUSTER_L2;
+ len = MIN(find_cluster_cb->len, n * s->header.cluster_size -
+ qed_offset_into_cluster(s, find_cluster_cb->pos));
+
+ if (offset && !qed_check_cluster_offset(s, offset)) {
+ ret = -EINVAL;
+ }
+
+out:
+ find_cluster_cb->cb(find_cluster_cb->opaque, ret, offset, len);
+ qemu_free(find_cluster_cb);
+}
+
+/**
+ * Find the offset of a data cluster
+ *
+ * @s: QED state
+ * @request: L2 cache entry
+ * @pos: Byte position in device
+ * @len: Number of bytes
+ * @cb: Completion function
+ * @opaque: User data for completion function
+ *
+ * This function translates a position in the block device to an offset in the
+ * image file. It invokes the cb completion callback to report back the
+ * translated offset or unallocated range in the image file.
+ *
+ * If the L2 table exists, request->l2_table points to the L2 table cache entry
+ * and the caller must free the reference when they are finished. The cache
+ * entry is exposed in this way to avoid callers having to read the L2 table
+ * again later during request processing. If request->l2_table is non-NULL it
+ * will be unreferenced before taking on the new cache entry.
+ */
+void qed_find_cluster(BDRVQEDState *s, QEDRequest *request, uint64_t pos,
+ size_t len, QEDFindClusterFunc *cb, void *opaque)
+{
+ QEDFindClusterCB *find_cluster_cb;
+ uint64_t l2_offset;
+
+ /* Limit length to L2 boundary. Requests are broken up at the L2 boundary
+ * so that a request acts on one L2 table at a time.
+ */
+ len = MIN(len, (((pos >> s->l1_shift) + 1) << s->l1_shift) - pos);
+
+ l2_offset = s->l1_table->offsets[qed_l1_index(s, pos)];
+ if (!l2_offset) {
+ cb(opaque, QED_CLUSTER_L1, 0, len);
+ return;
+ }
+ if (!qed_check_table_offset(s, l2_offset)) {
+ cb(opaque, -EINVAL, 0, 0);
+ return;
+ }
+
+ find_cluster_cb = qemu_malloc(sizeof(*find_cluster_cb));
+ find_cluster_cb->s = s;
+ find_cluster_cb->pos = pos;
+ find_cluster_cb->len = len;
+ find_cluster_cb->cb = cb;
+ find_cluster_cb->opaque = opaque;
+ find_cluster_cb->request = request;
+
+ qed_read_l2_table(s, request, l2_offset,
+ qed_find_cluster_cb, find_cluster_cb);
+}
diff --git a/block/qed-gencb.c b/block/qed-gencb.c
new file mode 100644
index 0000000..1513dc6
--- /dev/null
+++ b/block/qed-gencb.c
@@ -0,0 +1,32 @@
+/*
+ * QEMU Enhanced Disk Format
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "qed.h"
+
+void *gencb_alloc(size_t len, BlockDriverCompletionFunc *cb, void *opaque)
+{
+ GenericCB *gencb = qemu_malloc(len);
+ gencb->cb = cb;
+ gencb->opaque = opaque;
+ return gencb;
+}
+
+void gencb_complete(void *opaque, int ret)
+{
+ GenericCB *gencb = opaque;
+ BlockDriverCompletionFunc *cb = gencb->cb;
+ void *user_opaque = gencb->opaque;
+
+ qemu_free(gencb);
+ cb(user_opaque, ret);
+}
diff --git a/block/qed-l2-cache.c b/block/qed-l2-cache.c
new file mode 100644
index 0000000..57518a4
--- /dev/null
+++ b/block/qed-l2-cache.c
@@ -0,0 +1,173 @@
+/*
+ * QEMU Enhanced Disk Format L2 Cache
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+/*
+ * L2 table cache usage is as follows:
+ *
+ * An open image has one L2 table cache that is used to avoid accessing the
+ * image file for recently referenced L2 tables.
+ *
+ * Cluster offset lookup translates the logical offset within the block device
+ * to a cluster offset within the image file. This is done by indexing into
+ * the L1 and L2 tables which store cluster offsets. It is here where the L2
+ * table cache serves up recently referenced L2 tables.
+ *
+ * If there is a cache miss, that L2 table is read from the image file and
+ * committed to the cache. Subsequent accesses to that L2 table will be served
+ * from the cache until the table is evicted from the cache.
+ *
+ * L2 tables are also committed to the cache when new L2 tables are allocated
+ * in the image file. Since the L2 table cache is write-through, the new L2
+ * table is first written out to the image file and then committed to the
+ * cache.
+ *
+ * Multiple I/O requests may be using an L2 table cache entry at any given
+ * time. That means an entry may be in use across several requests and
+ * reference counting is needed to free the entry at the correct time. In
+ * particular, an entry evicted from the cache will only be freed once all
+ * references are dropped.
+ *
+ * An in-flight I/O request will hold a reference to a L2 table cache entry for
+ * the period during which it needs to access the L2 table. This includes
+ * cluster offset lookup, L2 table allocation, and L2 table update when a new
+ * data cluster has been allocated.
+ *
+ * An interesting case occurs when two requests need to access an L2 table that
+ * is not in the cache. Since the operation to read the table from the image
+ * file takes some time to complete, both requests may see a cache miss and
+ * start reading the L2 table from the image file. The first to finish will
+ * commit its L2 table into the cache. When the second tries to commit its
+ * table will be deleted in favor of the existing cache entry.
+ */
+
+#include "trace.h"
+#include "qed.h"
+
+/* Each L2 holds 2GB so this let's us fully cache a 100GB disk */
+#define MAX_L2_CACHE_SIZE 50
+
+/**
+ * Initialize the L2 cache
+ */
+void qed_init_l2_cache(L2TableCache *l2_cache)
+{
+ QTAILQ_INIT(&l2_cache->entries);
+ l2_cache->n_entries = 0;
+}
+
+/**
+ * Free the L2 cache
+ */
+void qed_free_l2_cache(L2TableCache *l2_cache)
+{
+ CachedL2Table *entry, *next_entry;
+
+ QTAILQ_FOREACH_SAFE(entry, &l2_cache->entries, node, next_entry) {
+ qemu_vfree(entry->table);
+ qemu_free(entry);
+ }
+}
+
+/**
+ * Allocate an uninitialized entry from the cache
+ *
+ * The returned entry has a reference count of 1 and is owned by the caller.
+ * The caller must allocate the actual table field for this entry and it must
+ * be freeable using qemu_vfree().
+ */
+CachedL2Table *qed_alloc_l2_cache_entry(L2TableCache *l2_cache)
+{
+ CachedL2Table *entry;
+
+ entry = qemu_mallocz(sizeof(*entry));
+ entry->ref++;
+
+ trace_qed_alloc_l2_cache_entry(l2_cache, entry);
+
+ return entry;
+}
+
+/**
+ * Decrease an entry's reference count and free if necessary when the reference
+ * count drops to zero.
+ */
+void qed_unref_l2_cache_entry(CachedL2Table *entry)
+{
+ if (!entry) {
+ return;
+ }
+
+ entry->ref--;
+ trace_qed_unref_l2_cache_entry(entry, entry->ref);
+ if (entry->ref == 0) {
+ qemu_vfree(entry->table);
+ qemu_free(entry);
+ }
+}
+
+/**
+ * Find an entry in the L2 cache. This may return NULL and it's up to the
+ * caller to satisfy the cache miss.
+ *
+ * For a cached entry, this function increases the reference count and returns
+ * the entry.
+ */
+CachedL2Table *qed_find_l2_cache_entry(L2TableCache *l2_cache, uint64_t offset)
+{
+ CachedL2Table *entry;
+
+ QTAILQ_FOREACH(entry, &l2_cache->entries, node) {
+ if (entry->offset == offset) {
+ trace_qed_find_l2_cache_entry(l2_cache, entry, offset, entry->ref);
+ entry->ref++;
+ return entry;
+ }
+ }
+ return NULL;
+}
+
+/**
+ * Commit an L2 cache entry into the cache. This is meant to be used as part of
+ * the process to satisfy a cache miss. A caller would allocate an entry which
+ * is not actually in the L2 cache and then once the entry was valid and
+ * present on disk, the entry can be committed into the cache.
+ *
+ * Since the cache is write-through, it's important that this function is not
+ * called until the entry is present on disk and the L1 has been updated to
+ * point to the entry.
+ *
+ * N.B. This function steals a reference to the l2_table from the caller so the
+ * caller must obtain a new reference by issuing a call to
+ * qed_find_l2_cache_entry().
+ */
+void qed_commit_l2_cache_entry(L2TableCache *l2_cache, CachedL2Table *l2_table)
+{
+ CachedL2Table *entry;
+
+ entry = qed_find_l2_cache_entry(l2_cache, l2_table->offset);
+ if (entry) {
+ qed_unref_l2_cache_entry(entry);
+ qed_unref_l2_cache_entry(l2_table);
+ return;
+ }
+
+ if (l2_cache->n_entries >= MAX_L2_CACHE_SIZE) {
+ entry = QTAILQ_FIRST(&l2_cache->entries);
+ QTAILQ_REMOVE(&l2_cache->entries, entry, node);
+ l2_cache->n_entries--;
+ qed_unref_l2_cache_entry(entry);
+ }
+
+ l2_cache->n_entries++;
+ QTAILQ_INSERT_TAIL(&l2_cache->entries, l2_table, node);
+}
diff --git a/block/qed-table.c b/block/qed-table.c
new file mode 100644
index 0000000..d38c673
--- /dev/null
+++ b/block/qed-table.c
@@ -0,0 +1,319 @@
+/*
+ * QEMU Enhanced Disk Format Table I/O
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "trace.h"
+#include "qemu_socket.h" /* for EINPROGRESS on Windows */
+#include "qed.h"
+
+typedef struct {
+ GenericCB gencb;
+ BDRVQEDState *s;
+ QEDTable *table;
+
+ struct iovec iov;
+ QEMUIOVector qiov;
+} QEDReadTableCB;
+
+static void qed_read_table_cb(void *opaque, int ret)
+{
+ QEDReadTableCB *read_table_cb = opaque;
+ QEDTable *table = read_table_cb->table;
+ int noffsets = read_table_cb->iov.iov_len / sizeof(uint64_t);
+ int i;
+
+ /* Handle I/O error */
+ if (ret) {
+ goto out;
+ }
+
+ /* Byteswap offsets */
+ for (i = 0; i < noffsets; i++) {
+ table->offsets[i] = le64_to_cpu(table->offsets[i]);
+ }
+
+out:
+ /* Completion */
+ trace_qed_read_table_cb(read_table_cb->s, read_table_cb->table, ret);
+ gencb_complete(&read_table_cb->gencb, ret);
+}
+
+static void qed_read_table(BDRVQEDState *s, uint64_t offset, QEDTable *table,
+ BlockDriverCompletionFunc *cb, void *opaque)
+{
+ QEDReadTableCB *read_table_cb = gencb_alloc(sizeof(*read_table_cb),
+ cb, opaque);
+ QEMUIOVector *qiov = &read_table_cb->qiov;
+ BlockDriverAIOCB *aiocb;
+
+ trace_qed_read_table(s, offset, table);
+
+ read_table_cb->s = s;
+ read_table_cb->table = table;
+ read_table_cb->iov.iov_base = table->offsets,
+ read_table_cb->iov.iov_len = s->header.cluster_size * s->header.table_size,
+
+ qemu_iovec_init_external(qiov, &read_table_cb->iov, 1);
+ aiocb = bdrv_aio_readv(s->bs->file, offset / BDRV_SECTOR_SIZE, qiov,
+ read_table_cb->iov.iov_len / BDRV_SECTOR_SIZE,
+ qed_read_table_cb, read_table_cb);
+ if (!aiocb) {
+ qed_read_table_cb(read_table_cb, -EIO);
+ }
+}
+
+typedef struct {
+ GenericCB gencb;
+ BDRVQEDState *s;
+ QEDTable *orig_table;
+ QEDTable *table;
+ bool flush; /* flush after write? */
+
+ struct iovec iov;
+ QEMUIOVector qiov;
+} QEDWriteTableCB;
+
+static void qed_write_table_cb(void *opaque, int ret)
+{
+ QEDWriteTableCB *write_table_cb = opaque;
+
+ trace_qed_write_table_cb(write_table_cb->s,
+ write_table_cb->orig_table,
+ write_table_cb->flush,
+ ret);
+
+ if (ret) {
+ goto out;
+ }
+
+ if (write_table_cb->flush) {
+ /* We still need to flush first */
+ write_table_cb->flush = false;
+ bdrv_aio_flush(write_table_cb->s->bs, qed_write_table_cb,
+ write_table_cb);
+ return;
+ }
+
+out:
+ qemu_vfree(write_table_cb->table);
+ gencb_complete(&write_table_cb->gencb, ret);
+ return;
+}
+
+/**
+ * Write out an updated part or all of a table
+ *
+ * @s: QED state
+ * @offset: Offset of table in image file, in bytes
+ * @table: Table
+ * @index: Index of first element
+ * @n: Number of elements
+ * @flush: Whether or not to sync to disk
+ * @cb: Completion function
+ * @opaque: Argument for completion function
+ */
+static void qed_write_table(BDRVQEDState *s, uint64_t offset, QEDTable *table,
+ unsigned int index, unsigned int n, bool flush,
+ BlockDriverCompletionFunc *cb, void *opaque)
+{
+ QEDWriteTableCB *write_table_cb;
+ BlockDriverAIOCB *aiocb;
+ unsigned int sector_mask = BDRV_SECTOR_SIZE / sizeof(uint64_t) - 1;
+ unsigned int start, end, i;
+ size_t len_bytes;
+
+ trace_qed_write_table(s, offset, table, index, n);
+
+ /* Calculate indices of the first and one after last elements */
+ start = index & ~sector_mask;
+ end = (index + n + sector_mask) & ~sector_mask;
+
+ len_bytes = (end - start) * sizeof(uint64_t);
+
+ write_table_cb = gencb_alloc(sizeof(*write_table_cb), cb, opaque);
+ write_table_cb->s = s;
+ write_table_cb->orig_table = table;
+ write_table_cb->flush = flush;
+ write_table_cb->table = qemu_blockalign(s->bs, len_bytes);
+ write_table_cb->iov.iov_base = write_table_cb->table->offsets;
+ write_table_cb->iov.iov_len = len_bytes;
+ qemu_iovec_init_external(&write_table_cb->qiov, &write_table_cb->iov, 1);
+
+ /* Byteswap table */
+ for (i = start; i < end; i++) {
+ uint64_t le_offset = cpu_to_le64(table->offsets[i]);
+ write_table_cb->table->offsets[i - start] = le_offset;
+ }
+
+ /* Adjust for offset into table */
+ offset += start * sizeof(uint64_t);
+
+ aiocb = bdrv_aio_writev(s->bs->file, offset / BDRV_SECTOR_SIZE,
+ &write_table_cb->qiov,
+ write_table_cb->iov.iov_len / BDRV_SECTOR_SIZE,
+ qed_write_table_cb, write_table_cb);
+ if (!aiocb) {
+ qed_write_table_cb(write_table_cb, -EIO);
+ }
+}
+
+/**
+ * Propagate return value from async callback
+ */
+static void qed_sync_cb(void *opaque, int ret)
+{
+ *(int *)opaque = ret;
+}
+
+int qed_read_l1_table_sync(BDRVQEDState *s)
+{
+ int ret = -EINPROGRESS;
+
+ async_context_push();
+
+ qed_read_table(s, s->header.l1_table_offset,
+ s->l1_table, qed_sync_cb, &ret);
+ while (ret == -EINPROGRESS) {
+ qemu_aio_wait();
+ }
+
+ async_context_pop();
+
+ return ret;
+}
+
+void qed_write_l1_table(BDRVQEDState *s, unsigned int index, unsigned int n,
+ BlockDriverCompletionFunc *cb, void *opaque)
+{
+ BLKDBG_EVENT(s->bs->file, BLKDBG_L1_UPDATE);
+ qed_write_table(s, s->header.l1_table_offset,
+ s->l1_table, index, n, false, cb, opaque);
+}
+
+int qed_write_l1_table_sync(BDRVQEDState *s, unsigned int index,
+ unsigned int n)
+{
+ int ret = -EINPROGRESS;
+
+ async_context_push();
+
+ qed_write_l1_table(s, index, n, qed_sync_cb, &ret);
+ while (ret == -EINPROGRESS) {
+ qemu_aio_wait();
+ }
+
+ async_context_pop();
+
+ return ret;
+}
+
+typedef struct {
+ GenericCB gencb;
+ BDRVQEDState *s;
+ uint64_t l2_offset;
+ QEDRequest *request;
+} QEDReadL2TableCB;
+
+static void qed_read_l2_table_cb(void *opaque, int ret)
+{
+ QEDReadL2TableCB *read_l2_table_cb = opaque;
+ QEDRequest *request = read_l2_table_cb->request;
+ BDRVQEDState *s = read_l2_table_cb->s;
+ CachedL2Table *l2_table = request->l2_table;
+
+ if (ret) {
+ /* can't trust loaded L2 table anymore */
+ qed_unref_l2_cache_entry(l2_table);
+ request->l2_table = NULL;
+ } else {
+ l2_table->offset = read_l2_table_cb->l2_offset;
+
+ qed_commit_l2_cache_entry(&s->l2_cache, l2_table);
+
+ /* This is guaranteed to succeed because we just committed the entry
+ * to the cache.
+ */
+ request->l2_table = qed_find_l2_cache_entry(&s->l2_cache,
+ l2_table->offset);
+ assert(request->l2_table != NULL);
+ }
+
+ gencb_complete(&read_l2_table_cb->gencb, ret);
+}
+
+void qed_read_l2_table(BDRVQEDState *s, QEDRequest *request, uint64_t offset,
+ BlockDriverCompletionFunc *cb, void *opaque)
+{
+ QEDReadL2TableCB *read_l2_table_cb;
+
+ qed_unref_l2_cache_entry(request->l2_table);
+
+ /* Check for cached L2 entry */
+ request->l2_table = qed_find_l2_cache_entry(&s->l2_cache, offset);
+ if (request->l2_table) {
+ cb(opaque, 0);
+ return;
+ }
+
+ request->l2_table = qed_alloc_l2_cache_entry(&s->l2_cache);
+ request->l2_table->table = qed_alloc_table(s);
+
+ read_l2_table_cb = gencb_alloc(sizeof(*read_l2_table_cb), cb, opaque);
+ read_l2_table_cb->s = s;
+ read_l2_table_cb->l2_offset = offset;
+ read_l2_table_cb->request = request;
+
+ BLKDBG_EVENT(s->bs->file, BLKDBG_L2_LOAD);
+ qed_read_table(s, offset, request->l2_table->table,
+ qed_read_l2_table_cb, read_l2_table_cb);
+}
+
+int qed_read_l2_table_sync(BDRVQEDState *s, QEDRequest *request, uint64_t offset)
+{
+ int ret = -EINPROGRESS;
+
+ async_context_push();
+
+ qed_read_l2_table(s, request, offset, qed_sync_cb, &ret);
+ while (ret == -EINPROGRESS) {
+ qemu_aio_wait();
+ }
+
+ async_context_pop();
+ return ret;
+}
+
+void qed_write_l2_table(BDRVQEDState *s, QEDRequest *request,
+ unsigned int index, unsigned int n, bool flush,
+ BlockDriverCompletionFunc *cb, void *opaque)
+{
+ BLKDBG_EVENT(s->bs->file, BLKDBG_L2_UPDATE);
+ qed_write_table(s, request->l2_table->offset,
+ request->l2_table->table, index, n, flush, cb, opaque);
+}
+
+int qed_write_l2_table_sync(BDRVQEDState *s, QEDRequest *request,
+ unsigned int index, unsigned int n, bool flush)
+{
+ int ret = -EINPROGRESS;
+
+ async_context_push();
+
+ qed_write_l2_table(s, request, index, n, flush, qed_sync_cb, &ret);
+ while (ret == -EINPROGRESS) {
+ qemu_aio_wait();
+ }
+
+ async_context_pop();
+ return ret;
+}
diff --git a/block/qed.c b/block/qed.c
index 1436ac4..cd1bead 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -155,6 +155,13 @@ static int qed_read_string(BlockDriverState *file, uint64_t offset, size_t n,
return 0;
}
+QEDTable *qed_alloc_table(BDRVQEDState *s)
+{
+ /* Honor O_DIRECT memory alignment requirements */
+ return qemu_blockalign(s->bs,
+ s->header.cluster_size * s->header.table_size);
+}
+
static int bdrv_qed_open(BlockDriverState *bs, int flags)
{
BDRVQEDState *s = bs->opaque;
@@ -244,11 +251,23 @@ static int bdrv_qed_open(BlockDriverState *bs, int flags)
bdrv_flush(bs->file);
}
+ s->l1_table = qed_alloc_table(s);
+ qed_init_l2_cache(&s->l2_cache);
+
+ ret = qed_read_l1_table_sync(s);
+ if (ret) {
+ qed_free_l2_cache(&s->l2_cache);
+ qemu_vfree(s->l1_table);
+ }
return ret;
}
static void bdrv_qed_close(BlockDriverState *bs)
{
+ BDRVQEDState *s = bs->opaque;
+
+ qed_free_l2_cache(&s->l2_cache);
+ qemu_vfree(s->l1_table);
}
static int bdrv_qed_flush(BlockDriverState *bs)
@@ -368,10 +387,43 @@ static int bdrv_qed_create(const char *filename, QEMUOptionParameter *options)
backing_file, backing_fmt);
}
+typedef struct {
+ int is_allocated;
+ int *pnum;
+} QEDIsAllocatedCB;
+
+static void qed_is_allocated_cb(void *opaque, int ret, uint64_t offset, size_t len)
+{
+ QEDIsAllocatedCB *cb = opaque;
+ *cb->pnum = len / BDRV_SECTOR_SIZE;
+ cb->is_allocated = ret == QED_CLUSTER_FOUND;
+}
+
static int bdrv_qed_is_allocated(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, int *pnum)
{
- return -ENOTSUP;
+ BDRVQEDState *s = bs->opaque;
+ uint64_t pos = (uint64_t)sector_num * BDRV_SECTOR_SIZE;
+ size_t len = (size_t)nb_sectors * BDRV_SECTOR_SIZE;
+ QEDIsAllocatedCB cb = {
+ .is_allocated = -1,
+ .pnum = pnum,
+ };
+ QEDRequest request = { .l2_table = NULL };
+
+ async_context_push();
+
+ qed_find_cluster(s, &request, pos, len, qed_is_allocated_cb, &cb);
+
+ while (cb.is_allocated == -1) {
+ qemu_aio_wait();
+ }
+
+ async_context_pop();
+
+ qed_unref_l2_cache_entry(request.l2_table);
+
+ return cb.is_allocated;
}
static int bdrv_qed_make_empty(BlockDriverState *bs)
diff --git a/block/qed.h b/block/qed.h
index 1f8a125..6d49a4d 100644
--- a/block/qed.h
+++ b/block/qed.h
@@ -96,16 +96,118 @@ typedef struct {
} QEDHeader;
typedef struct {
+ uint64_t offsets[0]; /* in bytes */
+} QEDTable;
+
+/* The L2 cache is a simple write-through cache for L2 structures */
+typedef struct CachedL2Table {
+ QEDTable *table;
+ uint64_t offset; /* offset=0 indicates an invalidate entry */
+ QTAILQ_ENTRY(CachedL2Table) node;
+ int ref;
+} CachedL2Table;
+
+typedef struct {
+ QTAILQ_HEAD(, CachedL2Table) entries;
+ unsigned int n_entries;
+} L2TableCache;
+
+typedef struct QEDRequest {
+ CachedL2Table *l2_table;
+} QEDRequest;
+
+typedef struct {
BlockDriverState *bs; /* device */
uint64_t file_size; /* length of image file, in bytes */
QEDHeader header; /* always cpu-endian */
+ QEDTable *l1_table;
+ L2TableCache l2_cache; /* l2 table cache */
uint32_t table_nelems;
uint32_t l1_shift;
uint32_t l2_shift;
uint32_t l2_mask;
} BDRVQEDState;
+enum {
+ QED_CLUSTER_FOUND, /* cluster found */
+ QED_CLUSTER_L2, /* cluster missing in L2 */
+ QED_CLUSTER_L1, /* cluster missing in L1 */
+};
+
+/**
+ * qed_find_cluster() completion callback
+ *
+ * @opaque: User data for completion callback
+ * @ret: QED_CLUSTER_FOUND Success
+ * QED_CLUSTER_L2 Data cluster unallocated in L2
+ * QED_CLUSTER_L1 L2 unallocated in L1
+ * -errno POSIX error occurred
+ * @offset: Data cluster offset
+ * @len: Contiguous bytes starting from cluster offset
+ *
+ * This function is invoked when qed_find_cluster() completes.
+ *
+ * On success ret is QED_CLUSTER_FOUND and offset/len are a contiguous range
+ * in the image file.
+ *
+ * On failure ret is QED_CLUSTER_L2 or QED_CLUSTER_L1 for missing L2 or L1
+ * table offset, respectively. len is number of contiguous unallocated bytes.
+ */
+typedef void QEDFindClusterFunc(void *opaque, int ret, uint64_t offset, size_t len);
+
+/**
+ * Generic callback for chaining async callbacks
+ */
+typedef struct {
+ BlockDriverCompletionFunc *cb;
+ void *opaque;
+} GenericCB;
+
+void *gencb_alloc(size_t len, BlockDriverCompletionFunc *cb, void *opaque);
+void gencb_complete(void *opaque, int ret);
+
+/**
+ * L2 cache functions
+ */
+void qed_init_l2_cache(L2TableCache *l2_cache);
+void qed_free_l2_cache(L2TableCache *l2_cache);
+CachedL2Table *qed_alloc_l2_cache_entry(L2TableCache *l2_cache);
+void qed_unref_l2_cache_entry(CachedL2Table *entry);
+CachedL2Table *qed_find_l2_cache_entry(L2TableCache *l2_cache, uint64_t offset);
+void qed_commit_l2_cache_entry(L2TableCache *l2_cache, CachedL2Table *l2_table);
+
+/**
+ * Table I/O functions
+ */
+int qed_read_l1_table_sync(BDRVQEDState *s);
+void qed_write_l1_table(BDRVQEDState *s, unsigned int index, unsigned int n,
+ BlockDriverCompletionFunc *cb, void *opaque);
+int qed_write_l1_table_sync(BDRVQEDState *s, unsigned int index,
+ unsigned int n);
+int qed_read_l2_table_sync(BDRVQEDState *s, QEDRequest *request,
+ uint64_t offset);
+void qed_read_l2_table(BDRVQEDState *s, QEDRequest *request, uint64_t offset,
+ BlockDriverCompletionFunc *cb, void *opaque);
+void qed_write_l2_table(BDRVQEDState *s, QEDRequest *request,
+ unsigned int index, unsigned int n, bool flush,
+ BlockDriverCompletionFunc *cb, void *opaque);
+int qed_write_l2_table_sync(BDRVQEDState *s, QEDRequest *request,
+ unsigned int index, unsigned int n, bool flush);
+
+/**
+ * Cluster functions
+ */
+void qed_find_cluster(BDRVQEDState *s, QEDRequest *request, uint64_t pos,
+ size_t len, QEDFindClusterFunc *cb, void *opaque);
+
+/**
+ * Consistency check
+ */
+int qed_check(BDRVQEDState *s, BdrvCheckResult *result, bool fix);
+
+QEDTable *qed_alloc_table(BDRVQEDState *s);
+
/**
* Round down to the start of a cluster
*/
@@ -114,6 +216,27 @@ static inline uint64_t qed_start_of_cluster(BDRVQEDState *s, uint64_t offset)
return offset & ~(uint64_t)(s->header.cluster_size - 1);
}
+static inline uint64_t qed_offset_into_cluster(BDRVQEDState *s, uint64_t offset)
+{
+ return offset & (s->header.cluster_size - 1);
+}
+
+static inline unsigned int qed_bytes_to_clusters(BDRVQEDState *s, size_t bytes)
+{
+ return qed_start_of_cluster(s, bytes + (s->header.cluster_size - 1)) /
+ (s->header.cluster_size - 1);
+}
+
+static inline unsigned int qed_l1_index(BDRVQEDState *s, uint64_t pos)
+{
+ return pos >> s->l1_shift;
+}
+
+static inline unsigned int qed_l2_index(BDRVQEDState *s, uint64_t pos)
+{
+ return (pos >> s->l2_shift) & s->l2_mask;
+}
+
/**
* Test if a cluster offset is valid
*/
diff --git a/trace-events b/trace-events
index da03d4b..59f97a2 100644
--- a/trace-events
+++ b/trace-events
@@ -192,3 +192,14 @@ disable sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64""
# vl.c
disable vm_state_notify(int running, int reason) "running %d reason %d"
+
+# block/qed-l2-cache.c
+disable qed_alloc_l2_cache_entry(void *l2_cache, void *entry) "l2_cache %p entry %p"
+disable qed_unref_l2_cache_entry(void *entry, int ref) "entry %p ref %d"
+disable qed_find_l2_cache_entry(void *l2_cache, void *entry, uint64_t offset, int ref) "l2_cache %p entry %p offset %"PRIu64" ref %d"
+
+# block/qed-table.c
+disable qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRIu64" table %p"
+disable qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d"
+disable qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u"
+disable qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d"
--
1.7.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v6 4/5] qed: Read/write support
2010-12-06 16:07 [Qemu-devel] [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Stefan Hajnoczi
` (2 preceding siblings ...)
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 3/5] qed: Table, L2 cache, and cluster functions Stefan Hajnoczi
@ 2010-12-06 16:08 ` Stefan Hajnoczi
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 5/5] qed: Consistency check support Stefan Hajnoczi
2010-12-17 13:08 ` [Qemu-devel] Re: [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Kevin Wolf
5 siblings, 0 replies; 8+ messages in thread
From: Stefan Hajnoczi @ 2010-12-06 16:08 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Anthony Liguori, Avi Kivity, Stefan Hajnoczi
This patch implements the read/write state machine. Operations are
fully asynchronous and multiple operations may be active at any time.
Allocating writes lock tables to ensure metadata updates do not
interfere with each other. If two allocating writes need to update the
same L2 table they will run sequentially. If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
Makefile.objs | 1 +
block/qed.c | 628 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
block/qed.h | 26 +++
trace-events | 10 +
4 files changed, 663 insertions(+), 2 deletions(-)
diff --git a/Makefile.objs b/Makefile.objs
index 55a046f..5b683e0 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -21,6 +21,7 @@ block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
+block-nested-y += qed-check.o
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
diff --git a/block/qed.c b/block/qed.c
index cd1bead..8e65d18 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -12,8 +12,26 @@
*
*/
+#include "trace.h"
#include "qed.h"
+static void qed_aio_cancel(BlockDriverAIOCB *blockacb)
+{
+ QEDAIOCB *acb = (QEDAIOCB *)blockacb;
+ bool finished = false;
+
+ /* Wait for the request to finish */
+ acb->finished = &finished;
+ while (!finished) {
+ qemu_aio_wait();
+ }
+}
+
+static AIOPool qed_aio_pool = {
+ .aiocb_size = sizeof(QEDAIOCB),
+ .cancel = qed_aio_cancel,
+};
+
static int bdrv_qed_probe(const uint8_t *buf, int buf_size,
const char *filename)
{
@@ -155,6 +173,24 @@ static int qed_read_string(BlockDriverState *file, uint64_t offset, size_t n,
return 0;
}
+/**
+ * Allocate new clusters
+ *
+ * @s: QED state
+ * @n: Number of contiguous clusters to allocate
+ * @ret: Offset of first allocated cluster
+ *
+ * This function only produces the offset where the new clusters should be
+ * written. It updates BDRVQEDState but does not make any changes to the image
+ * file.
+ */
+static uint64_t qed_alloc_clusters(BDRVQEDState *s, unsigned int n)
+{
+ uint64_t offset = s->file_size;
+ s->file_size += n * s->header.cluster_size;
+ return offset;
+}
+
QEDTable *qed_alloc_table(BDRVQEDState *s)
{
/* Honor O_DIRECT memory alignment requirements */
@@ -162,6 +198,23 @@ QEDTable *qed_alloc_table(BDRVQEDState *s)
s->header.cluster_size * s->header.table_size);
}
+/**
+ * Allocate a new zeroed L2 table
+ */
+static CachedL2Table *qed_new_l2_table(BDRVQEDState *s)
+{
+ CachedL2Table *l2_table = qed_alloc_l2_cache_entry(&s->l2_cache);
+
+ l2_table->table = qed_alloc_table(s);
+ l2_table->offset = qed_alloc_clusters(s, s->header.table_size);
+
+ memset(l2_table->table->offsets, 0,
+ s->header.cluster_size * s->header.table_size);
+ return l2_table;
+}
+
+static void qed_aio_next_io(void *opaque, int ret);
+
static int bdrv_qed_open(BlockDriverState *bs, int flags)
{
BDRVQEDState *s = bs->opaque;
@@ -170,6 +223,7 @@ static int bdrv_qed_open(BlockDriverState *bs, int flags)
int ret;
s->bs = bs;
+ QSIMPLEQ_INIT(&s->allocating_write_reqs);
ret = bdrv_pread(bs->file, 0, &le_header, sizeof(le_header));
if (ret < 0) {
@@ -431,13 +485,583 @@ static int bdrv_qed_make_empty(BlockDriverState *bs)
return -ENOTSUP;
}
+static BDRVQEDState *acb_to_s(QEDAIOCB *acb)
+{
+ return acb->common.bs->opaque;
+}
+
+/**
+ * Read from the backing file or zero-fill if no backing file
+ *
+ * @s: QED state
+ * @pos: Byte position in device
+ * @qiov: Destination I/O vector
+ * @cb: Completion function
+ * @opaque: User data for completion function
+ *
+ * This function reads qiov->size bytes starting at pos from the backing file.
+ * If there is no backing file then zeroes are read.
+ */
+static void qed_read_backing_file(BDRVQEDState *s, uint64_t pos,
+ QEMUIOVector *qiov,
+ BlockDriverCompletionFunc *cb, void *opaque)
+{
+ BlockDriverAIOCB *aiocb;
+ uint64_t backing_length = 0;
+ size_t size;
+
+ /* If there is a backing file, get its length. Treat the absence of a
+ * backing file like a zero length backing file.
+ */
+ if (s->bs->backing_hd) {
+ int64_t l = bdrv_getlength(s->bs->backing_hd);
+ if (l < 0) {
+ cb(opaque, l);
+ return;
+ }
+ backing_length = l;
+ }
+
+ /* Zero all sectors if reading beyond the end of the backing file */
+ if (pos >= backing_length ||
+ pos + qiov->size > backing_length) {
+ qemu_iovec_memset(qiov, 0, qiov->size);
+ }
+
+ /* Complete now if there are no backing file sectors to read */
+ if (pos >= backing_length) {
+ cb(opaque, 0);
+ return;
+ }
+
+ /* If the read straddles the end of the backing file, shorten it */
+ size = MIN((uint64_t)backing_length - pos, qiov->size);
+
+ BLKDBG_EVENT(s->bs->file, BLKDBG_READ_BACKING);
+ aiocb = bdrv_aio_readv(s->bs->backing_hd, pos / BDRV_SECTOR_SIZE,
+ qiov, size / BDRV_SECTOR_SIZE, cb, opaque);
+ if (!aiocb) {
+ cb(opaque, -EIO);
+ }
+}
+
+typedef struct {
+ GenericCB gencb;
+ BDRVQEDState *s;
+ QEMUIOVector qiov;
+ struct iovec iov;
+ uint64_t offset;
+} CopyFromBackingFileCB;
+
+static void qed_copy_from_backing_file_cb(void *opaque, int ret)
+{
+ CopyFromBackingFileCB *copy_cb = opaque;
+ qemu_vfree(copy_cb->iov.iov_base);
+ gencb_complete(©_cb->gencb, ret);
+}
+
+static void qed_copy_from_backing_file_write(void *opaque, int ret)
+{
+ CopyFromBackingFileCB *copy_cb = opaque;
+ BDRVQEDState *s = copy_cb->s;
+ BlockDriverAIOCB *aiocb;
+
+ if (ret) {
+ qed_copy_from_backing_file_cb(copy_cb, ret);
+ return;
+ }
+
+ BLKDBG_EVENT(s->bs->file, BLKDBG_COW_WRITE);
+ aiocb = bdrv_aio_writev(s->bs->file, copy_cb->offset / BDRV_SECTOR_SIZE,
+ ©_cb->qiov,
+ copy_cb->qiov.size / BDRV_SECTOR_SIZE,
+ qed_copy_from_backing_file_cb, copy_cb);
+ if (!aiocb) {
+ qed_copy_from_backing_file_cb(copy_cb, -EIO);
+ }
+}
+
+/**
+ * Copy data from backing file into the image
+ *
+ * @s: QED state
+ * @pos: Byte position in device
+ * @len: Number of bytes
+ * @offset: Byte offset in image file
+ * @cb: Completion function
+ * @opaque: User data for completion function
+ */
+static void qed_copy_from_backing_file(BDRVQEDState *s, uint64_t pos,
+ uint64_t len, uint64_t offset,
+ BlockDriverCompletionFunc *cb,
+ void *opaque)
+{
+ CopyFromBackingFileCB *copy_cb;
+
+ /* Skip copy entirely if there is no work to do */
+ if (len == 0) {
+ cb(opaque, 0);
+ return;
+ }
+
+ copy_cb = gencb_alloc(sizeof(*copy_cb), cb, opaque);
+ copy_cb->s = s;
+ copy_cb->offset = offset;
+ copy_cb->iov.iov_base = qemu_blockalign(s->bs, len);
+ copy_cb->iov.iov_len = len;
+ qemu_iovec_init_external(©_cb->qiov, ©_cb->iov, 1);
+
+ qed_read_backing_file(s, pos, ©_cb->qiov,
+ qed_copy_from_backing_file_write, copy_cb);
+}
+
+/**
+ * Link one or more contiguous clusters into a table
+ *
+ * @s: QED state
+ * @table: L2 table
+ * @index: First cluster index
+ * @n: Number of contiguous clusters
+ * @cluster: First cluster byte offset in image file
+ */
+static void qed_update_l2_table(BDRVQEDState *s, QEDTable *table, int index,
+ unsigned int n, uint64_t cluster)
+{
+ int i;
+ for (i = index; i < index + n; i++) {
+ table->offsets[i] = cluster;
+ cluster += s->header.cluster_size;
+ }
+}
+
+static void qed_aio_complete_bh(void *opaque)
+{
+ QEDAIOCB *acb = opaque;
+ BlockDriverCompletionFunc *cb = acb->common.cb;
+ void *user_opaque = acb->common.opaque;
+ int ret = acb->bh_ret;
+ bool *finished = acb->finished;
+
+ qemu_bh_delete(acb->bh);
+ qemu_aio_release(acb);
+
+ /* Invoke callback */
+ cb(user_opaque, ret);
+
+ /* Signal cancel completion */
+ if (finished) {
+ *finished = true;
+ }
+}
+
+static void qed_aio_complete(QEDAIOCB *acb, int ret)
+{
+ BDRVQEDState *s = acb_to_s(acb);
+
+ trace_qed_aio_complete(s, acb, ret);
+
+ /* Free resources */
+ qemu_iovec_destroy(&acb->cur_qiov);
+ qed_unref_l2_cache_entry(acb->request.l2_table);
+
+ /* Arrange for a bh to invoke the completion function */
+ acb->bh_ret = ret;
+ acb->bh = qemu_bh_new(qed_aio_complete_bh, acb);
+ qemu_bh_schedule(acb->bh);
+
+ /* Start next allocating write request waiting behind this one. Note that
+ * requests enqueue themselves when they first hit an unallocated cluster
+ * but they wait until the entire request is finished before waking up the
+ * next request in the queue. This ensures that we don't cycle through
+ * requests multiple times but rather finish one at a time completely.
+ */
+ if (acb == QSIMPLEQ_FIRST(&s->allocating_write_reqs)) {
+ QSIMPLEQ_REMOVE_HEAD(&s->allocating_write_reqs, next);
+ acb = QSIMPLEQ_FIRST(&s->allocating_write_reqs);
+ if (acb) {
+ qed_aio_next_io(acb, 0);
+ }
+ }
+}
+
+/**
+ * Commit the current L2 table to the cache
+ */
+static void qed_commit_l2_update(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ CachedL2Table *l2_table = acb->request.l2_table;
+
+ qed_commit_l2_cache_entry(&s->l2_cache, l2_table);
+
+ /* This is guaranteed to succeed because we just committed the entry to the
+ * cache.
+ */
+ acb->request.l2_table = qed_find_l2_cache_entry(&s->l2_cache,
+ l2_table->offset);
+ assert(acb->request.l2_table != NULL);
+
+ qed_aio_next_io(opaque, ret);
+}
+
+/**
+ * Update L1 table with new L2 table offset and write it out
+ */
+static void qed_aio_write_l1_update(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ int index;
+
+ if (ret) {
+ qed_aio_complete(acb, ret);
+ return;
+ }
+
+ index = qed_l1_index(s, acb->cur_pos);
+ s->l1_table->offsets[index] = acb->request.l2_table->offset;
+
+ qed_write_l1_table(s, index, 1, qed_commit_l2_update, acb);
+}
+
+/**
+ * Update L2 table with new cluster offsets and write them out
+ */
+static void qed_aio_write_l2_update(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ bool need_alloc = acb->find_cluster_ret == QED_CLUSTER_L1;
+ int index;
+
+ if (ret) {
+ goto err;
+ }
+
+ if (need_alloc) {
+ qed_unref_l2_cache_entry(acb->request.l2_table);
+ acb->request.l2_table = qed_new_l2_table(s);
+ }
+
+ index = qed_l2_index(s, acb->cur_pos);
+ qed_update_l2_table(s, acb->request.l2_table->table, index, acb->cur_nclusters,
+ acb->cur_cluster);
+
+ if (need_alloc) {
+ /* Write out the whole new L2 table */
+ qed_write_l2_table(s, &acb->request, 0, s->table_nelems, true,
+ qed_aio_write_l1_update, acb);
+ } else {
+ /* Write out only the updated part of the L2 table */
+ qed_write_l2_table(s, &acb->request, index, acb->cur_nclusters, false,
+ qed_aio_next_io, acb);
+ }
+ return;
+
+err:
+ qed_aio_complete(acb, ret);
+}
+
+/**
+ * Flush new data clusters before updating the L2 table
+ *
+ * This flush is necessary when a backing file is in use. A crash during an
+ * allocating write could result in empty clusters in the image. If the write
+ * only touched a subregion of the cluster, then backing image sectors have
+ * been lost in the untouched region. The solution is to flush after writing a
+ * new data cluster and before updating the L2 table.
+ */
+static void qed_aio_write_flush_before_l2_update(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+
+ if (!bdrv_aio_flush(s->bs->file, qed_aio_write_l2_update, opaque)) {
+ qed_aio_complete(acb, -EIO);
+ }
+}
+
+/**
+ * Write data to the image file
+ */
+static void qed_aio_write_main(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ uint64_t offset = acb->cur_cluster +
+ qed_offset_into_cluster(s, acb->cur_pos);
+ BlockDriverCompletionFunc *next_fn;
+ BlockDriverAIOCB *file_acb;
+
+ trace_qed_aio_write_main(s, acb, ret, offset, acb->cur_qiov.size);
+
+ if (ret) {
+ qed_aio_complete(acb, ret);
+ return;
+ }
+
+ if (acb->find_cluster_ret == QED_CLUSTER_FOUND) {
+ next_fn = qed_aio_next_io;
+ } else {
+ if (s->bs->backing_hd) {
+ next_fn = qed_aio_write_flush_before_l2_update;
+ } else {
+ next_fn = qed_aio_write_l2_update;
+ }
+ }
+
+ BLKDBG_EVENT(s->bs->file, BLKDBG_WRITE_AIO);
+ file_acb = bdrv_aio_writev(s->bs->file, offset / BDRV_SECTOR_SIZE,
+ &acb->cur_qiov,
+ acb->cur_qiov.size / BDRV_SECTOR_SIZE,
+ next_fn, acb);
+ if (!file_acb) {
+ qed_aio_complete(acb, -EIO);
+ }
+}
+
+/**
+ * Populate back untouched region of new data cluster
+ */
+static void qed_aio_write_postfill(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ uint64_t start = acb->cur_pos + acb->cur_qiov.size;
+ uint64_t len =
+ qed_start_of_cluster(s, start + s->header.cluster_size - 1) - start;
+ uint64_t offset = acb->cur_cluster +
+ qed_offset_into_cluster(s, acb->cur_pos) +
+ acb->cur_qiov.size;
+
+ if (ret) {
+ qed_aio_complete(acb, ret);
+ return;
+ }
+
+ trace_qed_aio_write_postfill(s, acb, start, len, offset);
+ qed_copy_from_backing_file(s, start, len, offset,
+ qed_aio_write_main, acb);
+}
+
+/**
+ * Populate front untouched region of new data cluster
+ */
+static void qed_aio_write_prefill(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ uint64_t start = qed_start_of_cluster(s, acb->cur_pos);
+ uint64_t len = qed_offset_into_cluster(s, acb->cur_pos);
+
+ trace_qed_aio_write_prefill(s, acb, start, len, acb->cur_cluster);
+ qed_copy_from_backing_file(s, start, len, acb->cur_cluster,
+ qed_aio_write_postfill, acb);
+}
+
+/**
+ * Write new data cluster
+ *
+ * @acb: Write request
+ * @len: Length in bytes
+ *
+ * This path is taken when writing to previously unallocated clusters.
+ */
+static void qed_aio_write_alloc(QEDAIOCB *acb, size_t len)
+{
+ BDRVQEDState *s = acb_to_s(acb);
+
+ /* Freeze this request if another allocating write is in progress */
+ if (acb != QSIMPLEQ_FIRST(&s->allocating_write_reqs)) {
+ QSIMPLEQ_INSERT_TAIL(&s->allocating_write_reqs, acb, next);
+ }
+ if (acb != QSIMPLEQ_FIRST(&s->allocating_write_reqs)) {
+ return; /* wait for existing request to finish */
+ }
+
+ acb->cur_nclusters = qed_bytes_to_clusters(s,
+ qed_offset_into_cluster(s, acb->cur_pos) + len);
+ acb->cur_cluster = qed_alloc_clusters(s, acb->cur_nclusters);
+ qemu_iovec_copy(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
+
+ /* Write new cluster */
+ qed_aio_write_prefill(acb, 0);
+}
+
+/**
+ * Write data cluster in place
+ *
+ * @acb: Write request
+ * @offset: Cluster offset in bytes
+ * @len: Length in bytes
+ *
+ * This path is taken when writing to already allocated clusters.
+ */
+static void qed_aio_write_inplace(QEDAIOCB *acb, uint64_t offset, size_t len)
+{
+ /* Calculate the I/O vector */
+ acb->cur_cluster = offset;
+ qemu_iovec_copy(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
+
+ /* Do the actual write */
+ qed_aio_write_main(acb, 0);
+}
+
+/**
+ * Write data cluster
+ *
+ * @opaque: Write request
+ * @ret: QED_CLUSTER_FOUND, QED_CLUSTER_L2, QED_CLUSTER_L1,
+ * or -errno
+ * @offset: Cluster offset in bytes
+ * @len: Length in bytes
+ *
+ * Callback from qed_find_cluster().
+ */
+static void qed_aio_write_data(void *opaque, int ret,
+ uint64_t offset, size_t len)
+{
+ QEDAIOCB *acb = opaque;
+
+ trace_qed_aio_write_data(acb_to_s(acb), acb, ret, offset, len);
+
+ acb->find_cluster_ret = ret;
+
+ switch (ret) {
+ case QED_CLUSTER_FOUND:
+ qed_aio_write_inplace(acb, offset, len);
+ break;
+
+ case QED_CLUSTER_L2:
+ case QED_CLUSTER_L1:
+ qed_aio_write_alloc(acb, len);
+ break;
+
+ default:
+ qed_aio_complete(acb, ret);
+ break;
+ }
+}
+
+/**
+ * Read data cluster
+ *
+ * @opaque: Read request
+ * @ret: QED_CLUSTER_FOUND, QED_CLUSTER_L2, QED_CLUSTER_L1,
+ * or -errno
+ * @offset: Cluster offset in bytes
+ * @len: Length in bytes
+ *
+ * Callback from qed_find_cluster().
+ */
+static void qed_aio_read_data(void *opaque, int ret,
+ uint64_t offset, size_t len)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ BlockDriverState *bs = acb->common.bs;
+ BlockDriverAIOCB *file_acb;
+
+ /* Adjust offset into cluster */
+ offset += qed_offset_into_cluster(s, acb->cur_pos);
+
+ trace_qed_aio_read_data(s, acb, ret, offset, len);
+
+ if (ret < 0) {
+ goto err;
+ }
+
+ qemu_iovec_copy(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
+
+ /* Handle backing file and unallocated sparse hole reads */
+ if (ret != QED_CLUSTER_FOUND) {
+ qed_read_backing_file(s, acb->cur_pos, &acb->cur_qiov,
+ qed_aio_next_io, acb);
+ return;
+ }
+
+ BLKDBG_EVENT(bs->file, BLKDBG_READ_AIO);
+ file_acb = bdrv_aio_readv(bs->file, offset / BDRV_SECTOR_SIZE,
+ &acb->cur_qiov,
+ acb->cur_qiov.size / BDRV_SECTOR_SIZE,
+ qed_aio_next_io, acb);
+ if (!file_acb) {
+ ret = -EIO;
+ goto err;
+ }
+ return;
+
+err:
+ qed_aio_complete(acb, ret);
+}
+
+/**
+ * Begin next I/O or complete the request
+ */
+static void qed_aio_next_io(void *opaque, int ret)
+{
+ QEDAIOCB *acb = opaque;
+ BDRVQEDState *s = acb_to_s(acb);
+ QEDFindClusterFunc *io_fn =
+ acb->is_write ? qed_aio_write_data : qed_aio_read_data;
+
+ trace_qed_aio_next_io(s, acb, ret, acb->cur_pos + acb->cur_qiov.size);
+
+ /* Handle I/O error */
+ if (ret) {
+ qed_aio_complete(acb, ret);
+ return;
+ }
+
+ acb->qiov_offset += acb->cur_qiov.size;
+ acb->cur_pos += acb->cur_qiov.size;
+ qemu_iovec_reset(&acb->cur_qiov);
+
+ /* Complete request */
+ if (acb->cur_pos >= acb->end_pos) {
+ qed_aio_complete(acb, 0);
+ return;
+ }
+
+ /* Find next cluster and start I/O */
+ qed_find_cluster(s, &acb->request,
+ acb->cur_pos, acb->end_pos - acb->cur_pos,
+ io_fn, acb);
+}
+
+static BlockDriverAIOCB *qed_aio_setup(BlockDriverState *bs,
+ int64_t sector_num,
+ QEMUIOVector *qiov, int nb_sectors,
+ BlockDriverCompletionFunc *cb,
+ void *opaque, bool is_write)
+{
+ QEDAIOCB *acb = qemu_aio_get(&qed_aio_pool, bs, cb, opaque);
+
+ trace_qed_aio_setup(bs->opaque, acb, sector_num, nb_sectors,
+ opaque, is_write);
+
+ acb->is_write = is_write;
+ acb->finished = NULL;
+ acb->qiov = qiov;
+ acb->qiov_offset = 0;
+ acb->cur_pos = (uint64_t)sector_num * BDRV_SECTOR_SIZE;
+ acb->end_pos = acb->cur_pos + nb_sectors * BDRV_SECTOR_SIZE;
+ acb->request.l2_table = NULL;
+ qemu_iovec_init(&acb->cur_qiov, qiov->niov);
+
+ /* Start request */
+ qed_aio_next_io(acb, 0);
+ return &acb->common;
+}
+
static BlockDriverAIOCB *bdrv_qed_aio_readv(BlockDriverState *bs,
int64_t sector_num,
QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb,
void *opaque)
{
- return NULL;
+ return qed_aio_setup(bs, sector_num, qiov, nb_sectors, cb, opaque, false);
}
static BlockDriverAIOCB *bdrv_qed_aio_writev(BlockDriverState *bs,
@@ -446,7 +1070,7 @@ static BlockDriverAIOCB *bdrv_qed_aio_writev(BlockDriverState *bs,
BlockDriverCompletionFunc *cb,
void *opaque)
{
- return NULL;
+ return qed_aio_setup(bs, sector_num, qiov, nb_sectors, cb, opaque, true);
}
static BlockDriverAIOCB *bdrv_qed_aio_flush(BlockDriverState *bs,
diff --git a/block/qed.h b/block/qed.h
index 6d49a4d..046a410 100644
--- a/block/qed.h
+++ b/block/qed.h
@@ -116,6 +116,29 @@ typedef struct QEDRequest {
CachedL2Table *l2_table;
} QEDRequest;
+typedef struct QEDAIOCB {
+ BlockDriverAIOCB common;
+ QEMUBH *bh;
+ int bh_ret; /* final return status for completion bh */
+ QSIMPLEQ_ENTRY(QEDAIOCB) next; /* next request */
+ bool is_write; /* false - read, true - write */
+ bool *finished; /* signal for cancel completion */
+ uint64_t end_pos; /* request end on block device, in bytes */
+
+ /* User scatter-gather list */
+ QEMUIOVector *qiov;
+ size_t qiov_offset; /* byte count already processed */
+
+ /* Current cluster scatter-gather list */
+ QEMUIOVector cur_qiov;
+ uint64_t cur_pos; /* position on block device, in bytes */
+ uint64_t cur_cluster; /* cluster offset in image file */
+ unsigned int cur_nclusters; /* number of clusters being accessed */
+ int find_cluster_ret; /* used for L1/L2 update */
+
+ QEDRequest request;
+} QEDAIOCB;
+
typedef struct {
BlockDriverState *bs; /* device */
uint64_t file_size; /* length of image file, in bytes */
@@ -127,6 +150,9 @@ typedef struct {
uint32_t l1_shift;
uint32_t l2_shift;
uint32_t l2_mask;
+
+ /* Allocating write request queue */
+ QSIMPLEQ_HEAD(, QEDAIOCB) allocating_write_reqs;
} BDRVQEDState;
enum {
diff --git a/trace-events b/trace-events
index 59f97a2..e8fed0f 100644
--- a/trace-events
+++ b/trace-events
@@ -203,3 +203,13 @@ disable qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRI
disable qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d"
disable qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u"
disable qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d"
+
+# block/qed.c
+disable qed_aio_complete(void *s, void *acb, int ret) "s %p acb %p ret %d"
+disable qed_aio_setup(void *s, void *acb, int64_t sector_num, int nb_sectors, void *opaque, int is_write) "s %p acb %p sector_num %"PRId64" nb_sectors %d opaque %p is_write %d"
+disable qed_aio_next_io(void *s, void *acb, int ret, uint64_t cur_pos) "s %p acb %p ret %d cur_pos %"PRIu64""
+disable qed_aio_read_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
+disable qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
+disable qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64""
+disable qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64""
+disable qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
--
1.7.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v6 5/5] qed: Consistency check support
2010-12-06 16:07 [Qemu-devel] [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Stefan Hajnoczi
` (3 preceding siblings ...)
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 4/5] qed: Read/write support Stefan Hajnoczi
@ 2010-12-06 16:08 ` Stefan Hajnoczi
2010-12-17 13:08 ` [Qemu-devel] Re: [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Kevin Wolf
5 siblings, 0 replies; 8+ messages in thread
From: Stefan Hajnoczi @ 2010-12-06 16:08 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Anthony Liguori, Avi Kivity, Stefan Hajnoczi
This patch adds support for the qemu-img check command. It also
introduces a dirty bit in the qed header to mark modified images as
needing a check. This bit is cleared when the image file is closed
cleanly.
If an image file is opened and it has the dirty bit set, a consistency
check will run and try to fix corrupted table offsets. These
corruptions may occur if there is power loss while an allocating write
is performed. Once the image is fixed it opens as normal again.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
block/qed-check.c | 210 +++++++++++++++++++++++++++++++++++++++++++++++++++++
block/qed.c | 125 +++++++++++++++++++++++++++++++-
block/qed.h | 4 +
3 files changed, 336 insertions(+), 3 deletions(-)
create mode 100644 block/qed-check.c
diff --git a/block/qed-check.c b/block/qed-check.c
new file mode 100644
index 0000000..4600932
--- /dev/null
+++ b/block/qed-check.c
@@ -0,0 +1,210 @@
+/*
+ * QEMU Enhanced Disk Format Consistency Check
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * Authors:
+ * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "qed.h"
+
+typedef struct {
+ BDRVQEDState *s;
+ BdrvCheckResult *result;
+ bool fix; /* whether to fix invalid offsets */
+
+ size_t nclusters;
+ uint32_t *used_clusters; /* referenced cluster bitmap */
+
+ QEDRequest request;
+} QEDCheck;
+
+static bool qed_test_bit(uint32_t *bitmap, uint64_t n) {
+ return !!(bitmap[n / 32] & (1 << (n % 32)));
+}
+
+static void qed_set_bit(uint32_t *bitmap, uint64_t n) {
+ bitmap[n / 32] |= 1 << (n % 32);
+}
+
+/**
+ * Set bitmap bits for clusters
+ *
+ * @check: Check structure
+ * @offset: Starting offset in bytes
+ * @n: Number of clusters
+ */
+static bool qed_set_used_clusters(QEDCheck *check, uint64_t offset,
+ unsigned int n)
+{
+ uint64_t cluster = qed_bytes_to_clusters(check->s, offset);
+ unsigned int corruptions = 0;
+
+ while (n-- != 0) {
+ /* Clusters should only be referenced once */
+ if (qed_test_bit(check->used_clusters, cluster)) {
+ corruptions++;
+ }
+
+ qed_set_bit(check->used_clusters, cluster);
+ cluster++;
+ }
+
+ check->result->corruptions += corruptions;
+ return corruptions == 0;
+}
+
+/**
+ * Check an L2 table
+ *
+ * @ret: Number of invalid cluster offsets
+ */
+static unsigned int qed_check_l2_table(QEDCheck *check, QEDTable *table)
+{
+ BDRVQEDState *s = check->s;
+ unsigned int i, num_invalid = 0;
+
+ for (i = 0; i < s->table_nelems; i++) {
+ uint64_t offset = table->offsets[i];
+
+ if (!offset) {
+ continue;
+ }
+
+ /* Detect invalid cluster offset */
+ if (!qed_check_cluster_offset(s, offset)) {
+ if (check->fix) {
+ table->offsets[i] = 0;
+ } else {
+ check->result->corruptions++;
+ }
+
+ num_invalid++;
+ continue;
+ }
+
+ qed_set_used_clusters(check, offset, 1);
+ }
+
+ return num_invalid;
+}
+
+/**
+ * Descend tables and check each cluster is referenced once only
+ */
+static int qed_check_l1_table(QEDCheck *check, QEDTable *table)
+{
+ BDRVQEDState *s = check->s;
+ unsigned int i, num_invalid_l1 = 0;
+ int ret, last_error = 0;
+
+ /* Mark L1 table clusters used */
+ qed_set_used_clusters(check, s->header.l1_table_offset,
+ s->header.table_size);
+
+ for (i = 0; i < s->table_nelems; i++) {
+ unsigned int num_invalid_l2;
+ uint64_t offset = table->offsets[i];
+
+ if (!offset) {
+ continue;
+ }
+
+ /* Detect invalid L2 offset */
+ if (!qed_check_table_offset(s, offset)) {
+ /* Clear invalid offset */
+ if (check->fix) {
+ table->offsets[i] = 0;
+ } else {
+ check->result->corruptions++;
+ }
+
+ num_invalid_l1++;
+ continue;
+ }
+
+ if (!qed_set_used_clusters(check, offset, s->header.table_size)) {
+ continue; /* skip an invalid table */
+ }
+
+ ret = qed_read_l2_table_sync(s, &check->request, offset);
+ if (ret) {
+ check->result->check_errors++;
+ last_error = ret;
+ continue;
+ }
+
+ num_invalid_l2 = qed_check_l2_table(check,
+ check->request.l2_table->table);
+
+ /* Write out fixed L2 table */
+ if (num_invalid_l2 > 0 && check->fix) {
+ ret = qed_write_l2_table_sync(s, &check->request, 0,
+ s->table_nelems, false);
+ if (ret) {
+ check->result->check_errors++;
+ last_error = ret;
+ continue;
+ }
+ }
+ }
+
+ /* Drop reference to final table */
+ qed_unref_l2_cache_entry(check->request.l2_table);
+ check->request.l2_table = NULL;
+
+ /* Write out fixed L1 table */
+ if (num_invalid_l1 > 0 && check->fix) {
+ ret = qed_write_l1_table_sync(s, 0, s->table_nelems);
+ if (ret) {
+ check->result->check_errors++;
+ last_error = ret;
+ }
+ }
+
+ return last_error;
+}
+
+/**
+ * Check for unreferenced (leaked) clusters
+ */
+static void qed_check_for_leaks(QEDCheck *check)
+{
+ BDRVQEDState *s = check->s;
+ size_t i;
+
+ for (i = s->header.header_size; i < check->nclusters; i++) {
+ if (!qed_test_bit(check->used_clusters, i)) {
+ check->result->leaks++;
+ }
+ }
+}
+
+int qed_check(BDRVQEDState *s, BdrvCheckResult *result, bool fix)
+{
+ QEDCheck check = {
+ .s = s,
+ .result = result,
+ .nclusters = qed_bytes_to_clusters(s, s->file_size),
+ .request = { .l2_table = NULL },
+ .fix = fix,
+ };
+ int ret;
+
+ check.used_clusters = qemu_mallocz(((check.nclusters + 31) / 32) *
+ sizeof(check.used_clusters[0]));
+
+ ret = qed_check_l1_table(&check, s->l1_table);
+ if (ret == 0) {
+ /* Only check for leaks if entire image was scanned successfully */
+ qed_check_for_leaks(&check);
+ }
+
+ qemu_free(check.used_clusters);
+ return ret;
+}
diff --git a/block/qed.c b/block/qed.c
index 8e65d18..085c4f2 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -99,6 +99,81 @@ static int qed_write_header_sync(BDRVQEDState *s)
return 0;
}
+typedef struct {
+ GenericCB gencb;
+ BDRVQEDState *s;
+ struct iovec iov;
+ QEMUIOVector qiov;
+ int nsectors;
+ uint8_t *buf;
+} QEDWriteHeaderCB;
+
+static void qed_write_header_cb(void *opaque, int ret)
+{
+ QEDWriteHeaderCB *write_header_cb = opaque;
+
+ qemu_vfree(write_header_cb->buf);
+ gencb_complete(write_header_cb, ret);
+}
+
+static void qed_write_header_read_cb(void *opaque, int ret)
+{
+ QEDWriteHeaderCB *write_header_cb = opaque;
+ BDRVQEDState *s = write_header_cb->s;
+ BlockDriverAIOCB *acb;
+
+ if (ret) {
+ qed_write_header_cb(write_header_cb, ret);
+ return;
+ }
+
+ /* Update header */
+ qed_header_cpu_to_le(&s->header, (QEDHeader *)write_header_cb->buf);
+
+ acb = bdrv_aio_writev(s->bs->file, 0, &write_header_cb->qiov,
+ write_header_cb->nsectors, qed_write_header_cb,
+ write_header_cb);
+ if (!acb) {
+ qed_write_header_cb(write_header_cb, -EIO);
+ }
+}
+
+/**
+ * Update header in-place (does not rewrite backing filename or other strings)
+ *
+ * This function only updates known header fields in-place and does not affect
+ * extra data after the QED header.
+ */
+static void qed_write_header(BDRVQEDState *s, BlockDriverCompletionFunc cb,
+ void *opaque)
+{
+ /* We must write full sectors for O_DIRECT but cannot necessarily generate
+ * the data following the header if an unrecognized compat feature is
+ * active. Therefore, first read the sectors containing the header, update
+ * them, and write back.
+ */
+
+ BlockDriverAIOCB *acb;
+ int nsectors = (sizeof(QEDHeader) + BDRV_SECTOR_SIZE - 1) /
+ BDRV_SECTOR_SIZE;
+ size_t len = nsectors * BDRV_SECTOR_SIZE;
+ QEDWriteHeaderCB *write_header_cb = gencb_alloc(sizeof(*write_header_cb),
+ cb, opaque);
+
+ write_header_cb->s = s;
+ write_header_cb->nsectors = nsectors;
+ write_header_cb->buf = qemu_blockalign(s->bs, len);
+ write_header_cb->iov.iov_base = write_header_cb->buf;
+ write_header_cb->iov.iov_len = len;
+ qemu_iovec_init_external(&write_header_cb->qiov, &write_header_cb->iov, 1);
+
+ acb = bdrv_aio_readv(s->bs->file, 0, &write_header_cb->qiov, nsectors,
+ qed_write_header_read_cb, write_header_cb);
+ if (!acb) {
+ qed_write_header_cb(write_header_cb, -EIO);
+ }
+}
+
static uint64_t qed_max_image_size(uint32_t cluster_size, uint32_t table_size)
{
uint64_t table_entries;
@@ -310,6 +385,32 @@ static int bdrv_qed_open(BlockDriverState *bs, int flags)
ret = qed_read_l1_table_sync(s);
if (ret) {
+ goto out;
+ }
+
+ /* If image was not closed cleanly, check consistency */
+ if (s->header.features & QED_F_NEED_CHECK) {
+ /* Read-only images cannot be fixed. There is no risk of corruption
+ * since write operations are not possible. Therefore, allow
+ * potentially inconsistent images to be opened read-only. This can
+ * aid data recovery from an otherwise inconsistent image.
+ */
+ if (!bdrv_is_read_only(bs->file)) {
+ BdrvCheckResult result = {0};
+
+ ret = qed_check(s, &result, true);
+ if (!ret && !result.corruptions && !result.check_errors) {
+ /* Ensure fixes reach storage before clearing check bit */
+ bdrv_flush(s->bs);
+
+ s->header.features &= ~QED_F_NEED_CHECK;
+ qed_write_header_sync(s);
+ }
+ }
+ }
+
+out:
+ if (ret) {
qed_free_l2_cache(&s->l2_cache);
qemu_vfree(s->l1_table);
}
@@ -320,6 +421,15 @@ static void bdrv_qed_close(BlockDriverState *bs)
{
BDRVQEDState *s = bs->opaque;
+ /* Ensure writes reach stable storage */
+ bdrv_flush(bs->file);
+
+ /* Clean shutdown, no check required on next open */
+ if (s->header.features & QED_F_NEED_CHECK) {
+ s->header.features &= ~QED_F_NEED_CHECK;
+ qed_write_header_sync(s);
+ }
+
qed_free_l2_cache(&s->l2_cache);
qemu_vfree(s->l1_table);
}
@@ -885,8 +995,15 @@ static void qed_aio_write_alloc(QEDAIOCB *acb, size_t len)
acb->cur_cluster = qed_alloc_clusters(s, acb->cur_nclusters);
qemu_iovec_copy(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
- /* Write new cluster */
- qed_aio_write_prefill(acb, 0);
+ /* Write new cluster if the image is already marked dirty */
+ if (s->header.features & QED_F_NEED_CHECK) {
+ qed_aio_write_prefill(acb, 0);
+ return;
+ }
+
+ /* Mark the image dirty before writing the new cluster */
+ s->header.features |= QED_F_NEED_CHECK;
+ qed_write_header(s, qed_aio_write_prefill, acb);
}
/**
@@ -1172,7 +1289,9 @@ static int bdrv_qed_change_backing_file(BlockDriverState *bs,
static int bdrv_qed_check(BlockDriverState *bs, BdrvCheckResult *result)
{
- return -ENOTSUP;
+ BDRVQEDState *s = bs->opaque;
+
+ return qed_check(s, result, false);
}
static QEMUOptionParameter qed_create_options[] = {
diff --git a/block/qed.h b/block/qed.h
index 046a410..2925e37 100644
--- a/block/qed.h
+++ b/block/qed.h
@@ -50,11 +50,15 @@ enum {
/* The image supports a backing file */
QED_F_BACKING_FILE = 0x01,
+ /* The image needs a consistency check before use */
+ QED_F_NEED_CHECK = 0x02,
+
/* The backing file format must not be probed, treat as raw image */
QED_F_BACKING_FORMAT_NO_PROBE = 0x04,
/* Feature bits must be used when the on-disk format changes */
QED_FEATURE_MASK = QED_F_BACKING_FILE | /* supported feature bits */
+ QED_F_NEED_CHECK |
QED_F_BACKING_FORMAT_NO_PROBE,
QED_COMPAT_FEATURE_MASK = 0, /* supported compat feature bits */
QED_AUTOCLEAR_FEATURE_MASK = 0, /* supported autoclear feature bits */
--
1.7.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] Re: [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format
2010-12-06 16:07 [Qemu-devel] [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Stefan Hajnoczi
` (4 preceding siblings ...)
2010-12-06 16:08 ` [Qemu-devel] [PATCH v6 5/5] qed: Consistency check support Stefan Hajnoczi
@ 2010-12-17 13:08 ` Kevin Wolf
2010-12-17 13:22 ` Stefan Hajnoczi
5 siblings, 1 reply; 8+ messages in thread
From: Kevin Wolf @ 2010-12-17 13:08 UTC (permalink / raw)
To: Stefan Hajnoczi; +Cc: Anthony Liguori, qemu-devel, Avi Kivity
Am 06.12.2010 17:07, schrieb Stefan Hajnoczi:
> For a changelog against v5, see below.
>
> QEMU Enhanced Disk format is a disk image format that forgoes features
> found in qcow2 in favor of better levels of performance and data
> integrity. Due to its simpler on-disk layout, it is possible to safely
> perform metadata updates more efficiently.
>
> Installations, suspend-to-disk, and other allocation-heavy I/O workloads
> will see increased performance due to fewer I/Os and syncs. Workloads
> that do not cause new clusters to be allocated will perform similar to
> raw images due to in-memory metadata caching.
>
> The format supports sparse disk images. It does not rely on the host
> filesystem holes feature, making it a good choice for sparse disk images
> that need to be transferred over channels where holes are not supported.
>
> Backing files are supported so only deltas against a base image can be
> stored. The base image may be smaller than the image file.
>
> The file format is extensible so that additional features can be added
> later with graceful compatibility handling. A specification for the file
> format is included in this patchset.
>
> Internal snapshots are not supported. This eliminates the need for
> additional metadata to track copy-on-write clusters.
>
> Compression and encryption are not supported. They add complexity and can be
> implemented at other layers in the stack (i.e. inside the guest or on the
> host). Encryption has been identified as a potential future extension and the
> file format allows for this.
>
> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Thanks, reluctantly applied to the block branch. ;-)
Kevin
^ permalink raw reply [flat|nested] 8+ messages in thread* [Qemu-devel] Re: [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format
2010-12-17 13:08 ` [Qemu-devel] Re: [PATCH v6 0/5] qed: Add QEMU Enhanced Disk format Kevin Wolf
@ 2010-12-17 13:22 ` Stefan Hajnoczi
0 siblings, 0 replies; 8+ messages in thread
From: Stefan Hajnoczi @ 2010-12-17 13:22 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Anthony Liguori, qemu-devel, Avi Kivity
On Fri, Dec 17, 2010 at 02:08:16PM +0100, Kevin Wolf wrote:
> Am 06.12.2010 17:07, schrieb Stefan Hajnoczi:
> > For a changelog against v5, see below.
> >
> > QEMU Enhanced Disk format is a disk image format that forgoes features
> > found in qcow2 in favor of better levels of performance and data
> > integrity. Due to its simpler on-disk layout, it is possible to safely
> > perform metadata updates more efficiently.
> >
> > Installations, suspend-to-disk, and other allocation-heavy I/O workloads
> > will see increased performance due to fewer I/Os and syncs. Workloads
> > that do not cause new clusters to be allocated will perform similar to
> > raw images due to in-memory metadata caching.
> >
> > The format supports sparse disk images. It does not rely on the host
> > filesystem holes feature, making it a good choice for sparse disk images
> > that need to be transferred over channels where holes are not supported.
> >
> > Backing files are supported so only deltas against a base image can be
> > stored. The base image may be smaller than the image file.
> >
> > The file format is extensible so that additional features can be added
> > later with graceful compatibility handling. A specification for the file
> > format is included in this patchset.
> >
> > Internal snapshots are not supported. This eliminates the need for
> > additional metadata to track copy-on-write clusters.
> >
> > Compression and encryption are not supported. They add complexity and can be
> > implemented at other layers in the stack (i.e. inside the guest or on the
> > host). Encryption has been identified as a potential future extension and the
> > file format allows for this.
> >
> > Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
> > Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
>
> Thanks, reluctantly applied to the block branch. ;-)
Thank you Kevin!
Stefan
^ permalink raw reply [flat|nested] 8+ messages in thread