qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: Anthony Liguori <anthony@codemonkey.ws>, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 13/14] softfloat: Add float/double to 16 bit integer conversion functions
Date: Tue,  7 Dec 2010 15:43:42 +0000	[thread overview]
Message-ID: <1291736623-3695-14-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1291736623-3695-1-git-send-email-peter.maydell@linaro.org>

The ARM architecture needs float/double to 16 bit integer conversions.
(The 32 bit versions aren't sufficient because of the requirement
to saturate at 16 bit MAXINT/MININT and to get the exception bits right.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
---
 fpu/softfloat.c |  136 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 fpu/softfloat.h |    4 ++
 2 files changed, 140 insertions(+), 0 deletions(-)

diff --git a/fpu/softfloat.c b/fpu/softfloat.c
index 0b82797..6f5b05d 100644
--- a/fpu/softfloat.c
+++ b/fpu/softfloat.c
@@ -1355,6 +1355,55 @@ int32 float32_to_int32_round_to_zero( float32 a STATUS_PARAM )
 
 /*----------------------------------------------------------------------------
 | Returns the result of converting the single-precision floating-point value
+| `a' to the 16-bit two's complement integer format.  The conversion is
+| performed according to the IEC/IEEE Standard for Binary Floating-Point
+| Arithmetic, except that the conversion is always rounded toward zero.
+| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
+| the conversion overflows, the largest integer with the same sign as `a' is
+| returned.
+*----------------------------------------------------------------------------*/
+
+int16 float32_to_int16_round_to_zero( float32 a STATUS_PARAM )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits32 aSig;
+    int32 z;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    shiftCount = aExp - 0x8E;
+    if ( 0 <= shiftCount ) {
+        if ( float32_val(a) != 0xC7000000 ) {
+            float_raise( float_flag_invalid STATUS_VAR);
+            if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) {
+                return 0x7FFF;
+            }
+        }
+        return (sbits32) 0xffff8000;
+    }
+    else if ( aExp <= 0x7E ) {
+        if ( aExp | aSig ) {
+            STATUS(float_exception_flags) |= float_flag_inexact;
+        }
+        return 0;
+    }
+    shiftCount -= 0x10;
+    aSig = ( aSig | 0x00800000 )<<8;
+    z = aSig>>( - shiftCount );
+    if ( (bits32) ( aSig<<( shiftCount & 31 ) ) ) {
+        STATUS(float_exception_flags) |= float_flag_inexact;
+    }
+    if ( aSign ) {
+        z = - z;
+    }
+    return z;
+
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the single-precision floating-point value
 | `a' to the 64-bit two's complement integer format.  The conversion is
 | performed according to the IEC/IEEE Standard for Binary Floating-Point
 | Arithmetic---which means in particular that the conversion is rounded
@@ -2412,6 +2461,57 @@ int32 float64_to_int32_round_to_zero( float64 a STATUS_PARAM )
 
 /*----------------------------------------------------------------------------
 | Returns the result of converting the double-precision floating-point value
+| `a' to the 16-bit two's complement integer format.  The conversion is
+| performed according to the IEC/IEEE Standard for Binary Floating-Point
+| Arithmetic, except that the conversion is always rounded toward zero.
+| If `a' is a NaN, the largest positive integer is returned.  Otherwise, if
+| the conversion overflows, the largest integer with the same sign as `a' is
+| returned.
+*----------------------------------------------------------------------------*/
+
+int16 float64_to_int16_round_to_zero( float64 a STATUS_PARAM )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits64 aSig, savedASig;
+    int32 z;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    if ( 0x40E < aExp ) {
+        if ( ( aExp == 0x7FF ) && aSig ) {
+            aSign = 0;
+        }
+        goto invalid;
+    }
+    else if ( aExp < 0x3FF ) {
+        if ( aExp || aSig ) {
+            STATUS(float_exception_flags) |= float_flag_inexact;
+        }
+        return 0;
+    }
+    aSig |= LIT64( 0x0010000000000000 );
+    shiftCount = 0x433 - aExp;
+    savedASig = aSig;
+    aSig >>= shiftCount;
+    z = aSig;
+    if ( aSign ) {
+        z = - z;
+    }
+    if ( ( (int16_t)z < 0 ) ^ aSign ) {
+ invalid:
+        float_raise( float_flag_invalid STATUS_VAR);
+        return aSign ? (sbits32) 0xffff8000 : 0x7FFF;
+    }
+    if ( ( aSig<<shiftCount ) != savedASig ) {
+        STATUS(float_exception_flags) |= float_flag_inexact;
+    }
+    return z;
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the double-precision floating-point value
 | `a' to the 64-bit two's complement integer format.  The conversion is
 | performed according to the IEC/IEEE Standard for Binary Floating-Point
 | Arithmetic---which means in particular that the conversion is rounded
@@ -5632,6 +5732,24 @@ unsigned int float32_to_uint32_round_to_zero( float32 a STATUS_PARAM )
     return res;
 }
 
+unsigned int float32_to_uint16_round_to_zero( float32 a STATUS_PARAM )
+{
+    int64_t v;
+    unsigned int res;
+
+    v = float32_to_int64_round_to_zero(a STATUS_VAR);
+    if (v < 0) {
+        res = 0;
+        float_raise( float_flag_invalid STATUS_VAR);
+    } else if (v > 0xffff) {
+        res = 0xffff;
+        float_raise( float_flag_invalid STATUS_VAR);
+    } else {
+        res = v;
+    }
+    return res;
+}
+
 unsigned int float64_to_uint32( float64 a STATUS_PARAM )
 {
     int64_t v;
@@ -5668,6 +5786,24 @@ unsigned int float64_to_uint32_round_to_zero( float64 a STATUS_PARAM )
     return res;
 }
 
+unsigned int float64_to_uint16_round_to_zero( float64 a STATUS_PARAM )
+{
+    int64_t v;
+    unsigned int res;
+
+    v = float64_to_int64_round_to_zero(a STATUS_VAR);
+    if (v < 0) {
+        res = 0;
+        float_raise( float_flag_invalid STATUS_VAR);
+    } else if (v > 0xffff) {
+        res = 0xffff;
+        float_raise( float_flag_invalid STATUS_VAR);
+    } else {
+        res = v;
+    }
+    return res;
+}
+
 /* FIXME: This looks broken.  */
 uint64_t float64_to_uint64 (float64 a STATUS_PARAM)
 {
diff --git a/fpu/softfloat.h b/fpu/softfloat.h
index 2e651e2..1c1004d 100644
--- a/fpu/softfloat.h
+++ b/fpu/softfloat.h
@@ -251,6 +251,8 @@ float32 float16_to_float32( bits16, flag STATUS_PARAM );
 /*----------------------------------------------------------------------------
 | Software IEC/IEEE single-precision conversion routines.
 *----------------------------------------------------------------------------*/
+int float32_to_int16_round_to_zero( float32 STATUS_PARAM );
+unsigned int float32_to_uint16_round_to_zero( float32 STATUS_PARAM );
 int float32_to_int32( float32 STATUS_PARAM );
 int float32_to_int32_round_to_zero( float32 STATUS_PARAM );
 unsigned int float32_to_uint32( float32 STATUS_PARAM );
@@ -327,6 +329,8 @@ INLINE int float32_is_any_nan(float32 a)
 /*----------------------------------------------------------------------------
 | Software IEC/IEEE double-precision conversion routines.
 *----------------------------------------------------------------------------*/
+int float64_to_int16_round_to_zero( float64 STATUS_PARAM );
+unsigned int float64_to_uint16_round_to_zero( float64 STATUS_PARAM );
 int float64_to_int32( float64 STATUS_PARAM );
 int float64_to_int32_round_to_zero( float64 STATUS_PARAM );
 unsigned int float64_to_uint32( float64 STATUS_PARAM );
-- 
1.6.3.3

  parent reply	other threads:[~2010-12-07 15:43 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-07 15:43 [Qemu-devel] [PATCH 00/14] [PULL] ARM fixes, v2 Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 01/14] target-arm: Add support for PKHxx in thumb2 Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 02/14] target-arm: Fix mixup in decoding of saturating add and sub Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 03/14] target-arm: Handle 'smc' as an undefined instruction Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 04/14] ARM: fix ldrexd/strexd Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 05/14] ARM: Fix decoding of VFP forms of VCVT between float and int/fixed Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 06/14] ARM: Fix decoding of Neon forms of VCVT between float and fixed point Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 07/14] ARM: Fix sense of to_integer bit in Neon VCVT float/int conversion Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 08/14] softfloat: Add float*_is_any_nan() functions Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 09/14] ARM: Return correct result for float-to-integer conversion of NaN Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 10/14] softfloat: Add float*_maybe_silence_nan() functions Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 11/14] ARM: Return correct result for single<->double conversion of NaN Peter Maydell
2010-12-07 15:43 ` [Qemu-devel] [PATCH 12/14] ARM: Ignore top 16 bits when doing VCVT from 16 bit fixed point Peter Maydell
2010-12-07 15:43 ` Peter Maydell [this message]
2010-12-07 15:43 ` [Qemu-devel] [PATCH 14/14] ARM: Implement VCVT to 16 bit integer using new softfloat routines Peter Maydell
2010-12-07 15:50 ` [Qemu-devel] [PATCH 00/14] [PULL] ARM fixes, v2 Peter Maydell
2010-12-16 18:07   ` Peter Maydell
2010-12-17 14:49     ` Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1291736623-3695-14-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).