qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PATCH] ide: Register vm change state handler once only
Date: Fri, 10 Dec 2010 14:47:57 +0000	[thread overview]
Message-ID: <1291992477-6388-1-git-send-email-stefanha@linux.vnet.ibm.com> (raw)

We register the vm change state handler in a PCI BAR map() function.
This function can be called multiple times throughout the lifetime of a
PCI IDE device.  This results in duplicate vm change state handlers
being register, none of which are ever unregistered.

Instead, register the vm change state handler in the device's init
function once and for all.

piix tested, cmd646 and via not tested.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 hw/ide/cmd646.c |   16 +++++++++-------
 hw/ide/piix.c   |   32 +++++++++++++++++++++++---------
 hw/ide/via.c    |   32 +++++++++++++++++++++++---------
 3 files changed, 55 insertions(+), 25 deletions(-)

diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index dfe6091..23fc6e1 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -167,9 +167,6 @@ static void bmdma_map(PCIDevice *pci_dev, int region_num,
 
     for(i = 0;i < 2; i++) {
         BMDMAState *bm = &d->bmdma[i];
-        d->bus[i].bmdma = bm;
-        bm->bus = d->bus+i;
-        qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
 
         if (i == 0) {
             register_ioport_write(addr, 4, 1, bmdma_writeb_0, d);
@@ -228,6 +225,7 @@ static int pci_cmd646_ide_initfn(PCIDevice *dev)
     PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
     uint8_t *pci_conf = d->dev.config;
     qemu_irq *irq;
+    int i;
 
     pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_CMD);
     pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_CMD_646);
@@ -253,10 +251,14 @@ static int pci_cmd646_ide_initfn(PCIDevice *dev)
     pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1
 
     irq = qemu_allocate_irqs(cmd646_set_irq, d, 2);
-    ide_bus_new(&d->bus[0], &d->dev.qdev);
-    ide_bus_new(&d->bus[1], &d->dev.qdev);
-    ide_init2(&d->bus[0], irq[0]);
-    ide_init2(&d->bus[1], irq[1]);
+    for (i = 0; i < 2; i++) {
+        ide_bus_new(&d->bus[i], &d->dev.qdev);
+        ide_init2(&d->bus[i], irq[i]);
+
+        d->bus[i].bmdma = &d->bmdma[i];
+        bm->bus = &d->bus[i];
+        qemu_add_vm_change_state_handler(ide_dma_restart_cb, &d->bmdma[i]);
+    }
 
     vmstate_register(&dev->qdev, 0, &vmstate_ide_pci, d);
     qemu_register_reset(cmd646_reset, d);
diff --git a/hw/ide/piix.c b/hw/ide/piix.c
index e02b89a..f2752e7 100644
--- a/hw/ide/piix.c
+++ b/hw/ide/piix.c
@@ -76,9 +76,6 @@ static void bmdma_map(PCIDevice *pci_dev, int region_num,
 
     for(i = 0;i < 2; i++) {
         BMDMAState *bm = &d->bmdma[i];
-        d->bus[i].bmdma = bm;
-        bm->bus = d->bus+i;
-        qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
 
         register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
 
@@ -112,6 +109,28 @@ static void piix3_reset(void *opaque)
     pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */
 }
 
+static void pci_piix_init_ports(PCIIDEState *d) {
+    int i;
+    struct {
+        int iobase;
+        int iobase2;
+        int isairq;
+    } port_info[] = {
+        {0x1f0, 0x3f6, 14},
+        {0x170, 0x376, 15},
+    };
+
+    for (i = 0; i < 2; i++) {
+        ide_bus_new(&d->bus[i], &d->dev.qdev);
+        ide_init_ioport(&d->bus[i], port_info[i].iobase, port_info[i].iobase2);
+        ide_init2(&d->bus[i], isa_reserve_irq(port_info[i].isairq));
+
+        d->bus[i].bmdma = &d->bmdma[i];
+        d->bmdma[i].bus = &d->bus[i];
+        qemu_add_vm_change_state_handler(ide_dma_restart_cb, &d->bmdma[i]);
+    }
+}
+
 static int pci_piix_ide_initfn(PCIIDEState *d)
 {
     uint8_t *pci_conf = d->dev.config;
@@ -125,13 +144,8 @@ static int pci_piix_ide_initfn(PCIIDEState *d)
 
     vmstate_register(&d->dev.qdev, 0, &vmstate_ide_pci, d);
 
-    ide_bus_new(&d->bus[0], &d->dev.qdev);
-    ide_bus_new(&d->bus[1], &d->dev.qdev);
-    ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
-    ide_init_ioport(&d->bus[1], 0x170, 0x376);
+    pci_piix_init_ports(d);
 
-    ide_init2(&d->bus[0], isa_reserve_irq(14));
-    ide_init2(&d->bus[1], isa_reserve_irq(15));
     return 0;
 }
 
diff --git a/hw/ide/via.c b/hw/ide/via.c
index 66be0c4..839c571 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -78,9 +78,6 @@ static void bmdma_map(PCIDevice *pci_dev, int region_num,
 
     for(i = 0;i < 2; i++) {
         BMDMAState *bm = &d->bmdma[i];
-        d->bus[i].bmdma = bm;
-        bm->bus = d->bus+i;
-        qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
 
         register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
 
@@ -135,6 +132,28 @@ static void via_reset(void *opaque)
     pci_set_long(pci_conf + 0xc0, 0x00020001);
 }
 
+static void vt82c686b_init_ports(PCIIDEState *d) {
+    int i;
+    struct {
+        int iobase;
+        int iobase2;
+        int isairq;
+    } port_info[] = {
+        {0x1f0, 0x3f6, 14},
+        {0x170, 0x376, 15},
+    };
+
+    for (i = 0; i < 2; i++) {
+        ide_bus_new(&d->bus[i], &d->dev.qdev);
+        ide_init2(&d->bus[i], isa_reserve_irq(port_info[i].isairq));
+        ide_init_ioport(&d->bus[i], port_info[i].iobase, port_info[i].iobase2);
+
+        d->bus[i].bmdma = &d->bmdma[i];
+        d->bmdma[i].bus = &d->bus[i];
+        qemu_add_vm_change_state_handler(ide_dma_restart_cb, &d->bmdma[i]);
+    }
+}
+
 /* via ide func */
 static int vt82c686b_ide_initfn(PCIDevice *dev)
 {
@@ -154,12 +173,7 @@ static int vt82c686b_ide_initfn(PCIDevice *dev)
 
     vmstate_register(&dev->qdev, 0, &vmstate_ide_pci, d);
 
-    ide_bus_new(&d->bus[0], &d->dev.qdev);
-    ide_bus_new(&d->bus[1], &d->dev.qdev);
-    ide_init2(&d->bus[0], isa_reserve_irq(14));
-    ide_init2(&d->bus[1], isa_reserve_irq(15));
-    ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
-    ide_init_ioport(&d->bus[1], 0x170, 0x376);
+    vt82c686b_init_ports(d);
 
     return 0;
 }
-- 
1.7.2.3

             reply	other threads:[~2010-12-10 14:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-10 14:47 Stefan Hajnoczi [this message]
2010-12-16 12:29 ` [Qemu-devel] Re: [PATCH] ide: Register vm change state handler once only Kevin Wolf
2010-12-16 13:28   ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1291992477-6388-1-git-send-email-stefanha@linux.vnet.ibm.com \
    --to=stefanha@linux.vnet.ibm.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).