qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Weil <weil@mail.berlios.de>
To: QEMU Developers <qemu-devel@nongnu.org>
Subject: [Qemu-devel] [PATCH] Fix trivial "endianness bugs"
Date: Fri,  7 Jan 2011 21:29:15 +0100	[thread overview]
Message-ID: <1294432155-28513-1-git-send-email-weil@mail.berlios.de> (raw)

Replace endianess -> endianness.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
---
 audio/sdlaudio.c    |   20 ++++++++++----------
 block/vdi.c         |    4 ++--
 hw/xilinx_ethlite.c |    2 +-
 target-mips/cpu.h   |    2 +-
 usb-bsd.c           |    2 +-
 5 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/audio/sdlaudio.c b/audio/sdlaudio.c
index b74dcfa..04fb9f4 100644
--- a/audio/sdlaudio.c
+++ b/audio/sdlaudio.c
@@ -139,36 +139,36 @@ static int aud_to_sdlfmt (audfmt_e fmt)
     }
 }
 
-static int sdl_to_audfmt (int sdlfmt, audfmt_e *fmt, int *endianess)
+static int sdl_to_audfmt (int sdlfmt, audfmt_e *fmt, int *endianness)
 {
     switch (sdlfmt) {
     case AUDIO_S8:
-        *endianess = 0;
+        *endianness = 0;
         *fmt = AUD_FMT_S8;
         break;
 
     case AUDIO_U8:
-        *endianess = 0;
+        *endianness = 0;
         *fmt = AUD_FMT_U8;
         break;
 
     case AUDIO_S16LSB:
-        *endianess = 0;
+        *endianness = 0;
         *fmt = AUD_FMT_S16;
         break;
 
     case AUDIO_U16LSB:
-        *endianess = 0;
+        *endianness = 0;
         *fmt = AUD_FMT_U16;
         break;
 
     case AUDIO_S16MSB:
-        *endianess = 1;
+        *endianness = 1;
         *fmt = AUD_FMT_S16;
         break;
 
     case AUDIO_U16MSB:
-        *endianess = 1;
+        *endianness = 1;
         *fmt = AUD_FMT_U16;
         break;
 
@@ -338,7 +338,7 @@ static int sdl_init_out (HWVoiceOut *hw, struct audsettings *as)
     SDLVoiceOut *sdl = (SDLVoiceOut *) hw;
     SDLAudioState *s = &glob_sdl;
     SDL_AudioSpec req, obt;
-    int endianess;
+    int endianness;
     int err;
     audfmt_e effective_fmt;
     struct audsettings obt_as;
@@ -354,7 +354,7 @@ static int sdl_init_out (HWVoiceOut *hw, struct audsettings *as)
         return -1;
     }
 
-    err = sdl_to_audfmt (obt.format, &effective_fmt, &endianess);
+    err = sdl_to_audfmt (obt.format, &effective_fmt, &endianness);
     if (err) {
         sdl_close (s);
         return -1;
@@ -363,7 +363,7 @@ static int sdl_init_out (HWVoiceOut *hw, struct audsettings *as)
     obt_as.freq = obt.freq;
     obt_as.nchannels = obt.channels;
     obt_as.fmt = effective_fmt;
-    obt_as.endianness = endianess;
+    obt_as.endianness = endianness;
 
     audio_pcm_init_info (&hw->info, &obt_as);
     hw->samples = obt.samples;
diff --git a/block/vdi.c b/block/vdi.c
index ab8f70f..83b9c04 100644
--- a/block/vdi.c
+++ b/block/vdi.c
@@ -113,7 +113,7 @@ void uuid_unparse(const uuid_t uu, char *out);
  */
 #define VDI_TEXT "<<< QEMU VM Virtual Disk Image >>>\n"
 
-/* Unallocated blocks use this index (no need to convert endianess). */
+/* Unallocated blocks use this index (no need to convert endianness). */
 #define VDI_UNALLOCATED UINT32_MAX
 
 #if !defined(CONFIG_UUID)
@@ -194,7 +194,7 @@ typedef struct {
     uint32_t block_sectors;
     /* First sector of block map. */
     uint32_t bmap_sector;
-    /* VDI header (converted to host endianess). */
+    /* VDI header (converted to host endianness). */
     VdiHeader header;
 } BDRVVdiState;
 
diff --git a/hw/xilinx_ethlite.c b/hw/xilinx_ethlite.c
index 54b57d7..a6bd4e5 100644
--- a/hw/xilinx_ethlite.c
+++ b/hw/xilinx_ethlite.c
@@ -186,7 +186,7 @@ static ssize_t eth_rx(VLANClientState *nc, const uint8_t *buf, size_t size)
     D(qemu_log("%s %d rxbase=%x\n", __func__, size, rxbase));
     memcpy(&s->regs[rxbase + R_RX_BUF0], buf, size);
 
-    /* Bring it into host endianess.  */
+    /* Bring it into host endianness.  */
     for (i = 0; i < ((size + 3) / 4); i++) {
        uint32_t d = s->regs[rxbase + R_RX_BUF0 + i];
        s->regs[rxbase + R_RX_BUF0 + i] = be32_to_cpu(d);
diff --git a/target-mips/cpu.h b/target-mips/cpu.h
index 2419aa9..0b98d10 100644
--- a/target-mips/cpu.h
+++ b/target-mips/cpu.h
@@ -63,7 +63,7 @@ union fpr_t {
     uint32_t w[2]; /* binary single fixed-point */
 };
 /* define FP_ENDIAN_IDX to access the same location
- * in the fpr_t union regardless of the host endianess
+ * in the fpr_t union regardless of the host endianness
  */
 #if defined(HOST_WORDS_BIGENDIAN)
 #  define FP_ENDIAN_IDX 1
diff --git a/usb-bsd.c b/usb-bsd.c
index 48567a3..3c84ae9 100644
--- a/usb-bsd.c
+++ b/usb-bsd.c
@@ -457,7 +457,7 @@ static int usb_host_scan(void *opaque, USBScanFunc *func)
                 printf("usb_host_scan: couldn't get device information for %s - %s\n",
                        devbuf, strerror(errno));
 
-            // XXX: might need to fixup endianess of word values before copying over
+            // XXX: might need to fixup endianness of word values before copying over
 
             vendor_id = dev_info.udi_vendorNo;
             product_id = dev_info.udi_productNo;
-- 
1.7.2.3

             reply	other threads:[~2011-01-07 20:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-07 20:29 Stefan Weil [this message]
2011-01-24 17:52 ` [Qemu-devel] Re: [PATCH] Fix trivial "endianness bugs" Stefan Weil
2011-01-24 18:04   ` [Qemu-devel] " Stefan Weil
2011-02-16 20:01     ` [Qemu-devel] " Stefan Weil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1294432155-28513-1-git-send-email-weil@mail.berlios.de \
    --to=weil@mail.berlios.de \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).