From: anthony.perard@citrix.com
To: QEMU-devel <qemu-devel@nongnu.org>
Cc: Anthony PERARD <anthony.perard@citrix.com>,
Xen Devel <xen-devel@lists.xensource.com>
Subject: [Qemu-devel] Re: [PATCH V2 1/3] Introduce log_start/log_stop in CPUPhysMemoryClient
Date: Tue, 18 Jan 2011 12:25:22 +0000 [thread overview]
Message-ID: <1295353522-31891-1-git-send-email-anthony.perard@citrix.com> (raw)
In-Reply-To: <alpine.DEB.1.10.1101171811180.784@perard.cam.xci-test.com>
From: Anthony PERARD <anthony.perard@citrix.com>
In order to use log_start/log_stop with Xen as well in the vga code,
this two operations have been put in CPUPhysMemoryClient.
The two new functions cpu_physical_log_start,cpu_physical_log_stop are
used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does
no longer depends on kvm header.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
---
cpu-all.h | 6 ++++++
cpu-common.h | 4 ++++
exec.c | 28 ++++++++++++++++++++++++++++
hw/vga.c | 31 ++++++++++++++++---------------
hw/vhost.c | 2 ++
kvm-all.c | 8 ++++++--
kvm-stub.c | 10 ----------
kvm.h | 3 ---
8 files changed, 62 insertions(+), 30 deletions(-)
diff --git a/cpu-all.h b/cpu-all.h
index 30ae17d..aaf5442 100644
--- a/cpu-all.h
+++ b/cpu-all.h
@@ -957,6 +957,12 @@ int cpu_physical_memory_get_dirty_tracking(void);
int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr,
target_phys_addr_t end_addr);
+int cpu_physical_log_start(target_phys_addr_t start_addr,
+ ram_addr_t size);
+
+int cpu_physical_log_stop(target_phys_addr_t start_addr,
+ ram_addr_t size);
+
void dump_exec_info(FILE *f, fprintf_function cpu_fprintf);
#endif /* !CONFIG_USER_ONLY */
diff --git a/cpu-common.h b/cpu-common.h
index 8ec01f4..2344842 100644
--- a/cpu-common.h
+++ b/cpu-common.h
@@ -88,6 +88,10 @@ struct CPUPhysMemoryClient {
target_phys_addr_t end_addr);
int (*migration_log)(struct CPUPhysMemoryClient *client,
int enable);
+ int (*log_start)(struct CPUPhysMemoryClient *client,
+ target_phys_addr_t phys_addr, ram_addr_t size);
+ int (*log_stop)(struct CPUPhysMemoryClient *client,
+ target_phys_addr_t phys_addr, ram_addr_t size);
QLIST_ENTRY(CPUPhysMemoryClient) list;
};
diff --git a/exec.c b/exec.c
index c6ed96d..59a6426 100644
--- a/exec.c
+++ b/exec.c
@@ -2073,6 +2073,34 @@ int cpu_physical_sync_dirty_bitmap(target_phys_addr_t start_addr,
return ret;
}
+int cpu_physical_log_start(target_phys_addr_t start_addr,
+ ram_addr_t size)
+{
+ CPUPhysMemoryClient *client;
+ QLIST_FOREACH(client, &memory_client_list, list) {
+ if (client->log_start) {
+ int r = client->log_start(client, start_addr, size);
+ if (r < 0)
+ return r;
+ }
+ }
+ return 0;
+}
+
+int cpu_physical_log_stop(target_phys_addr_t start_addr,
+ ram_addr_t size)
+{
+ CPUPhysMemoryClient *client;
+ QLIST_FOREACH(client, &memory_client_list, list) {
+ if (client->log_stop) {
+ int r = client->log_stop(client, start_addr, size);
+ if (r < 0)
+ return r;
+ }
+ }
+ return 0;
+}
+
static inline void tlb_update_dirty(CPUTLBEntry *tlb_entry)
{
ram_addr_t ram_addr;
diff --git a/hw/vga.c b/hw/vga.c
index c057f4f..a9bf172 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -28,7 +28,6 @@
#include "vga_int.h"
#include "pixel_ops.h"
#include "qemu-timer.h"
-#include "kvm.h"
//#define DEBUG_VGA
//#define DEBUG_VGA_MEM
@@ -1597,34 +1596,36 @@ static void vga_sync_dirty_bitmap(VGACommonState *s)
void vga_dirty_log_start(VGACommonState *s)
{
- if (kvm_enabled() && s->map_addr)
- kvm_log_start(s->map_addr, s->map_end - s->map_addr);
+ if (s->map_addr) {
+ cpu_physical_log_start(s->map_addr, s->map_end - s->map_addr);
+ }
- if (kvm_enabled() && s->lfb_vram_mapped) {
- kvm_log_start(isa_mem_base + 0xa0000, 0x8000);
- kvm_log_start(isa_mem_base + 0xa8000, 0x8000);
+ if (s->lfb_vram_mapped) {
+ cpu_physical_log_start(isa_mem_base + 0xa0000, 0x8000);
+ cpu_physical_log_start(isa_mem_base + 0xa8000, 0x8000);
}
#ifdef CONFIG_BOCHS_VBE
- if (kvm_enabled() && s->vbe_mapped) {
- kvm_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
+ if (s->vbe_mapped) {
+ cpu_physical_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
}
#endif
}
void vga_dirty_log_stop(VGACommonState *s)
{
- if (kvm_enabled() && s->map_addr)
- kvm_log_stop(s->map_addr, s->map_end - s->map_addr);
+ if (s->map_addr) {
+ cpu_physical_log_stop(s->map_addr, s->map_end - s->map_addr);
+ }
- if (kvm_enabled() && s->lfb_vram_mapped) {
- kvm_log_stop(isa_mem_base + 0xa0000, 0x8000);
- kvm_log_stop(isa_mem_base + 0xa8000, 0x8000);
+ if (s->lfb_vram_mapped) {
+ cpu_physical_log_stop(isa_mem_base + 0xa0000, 0x8000);
+ cpu_physical_log_stop(isa_mem_base + 0xa8000, 0x8000);
}
#ifdef CONFIG_BOCHS_VBE
- if (kvm_enabled() && s->vbe_mapped) {
- kvm_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
+ if (s->vbe_mapped) {
+ cpu_physical_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
}
#endif
}
diff --git a/hw/vhost.c b/hw/vhost.c
index 8586f66..932b372 100644
--- a/hw/vhost.c
+++ b/hw/vhost.c
@@ -606,6 +606,8 @@ int vhost_dev_init(struct vhost_dev *hdev, int devfd)
hdev->client.set_memory = vhost_client_set_memory;
hdev->client.sync_dirty_bitmap = vhost_client_sync_dirty_bitmap;
hdev->client.migration_log = vhost_client_migration_log;
+ hdev->client.log_start = NULL;
+ hdev->client.log_stop = NULL;
hdev->mem = qemu_mallocz(offsetof(struct vhost_memory, regions));
hdev->log = NULL;
hdev->log_size = 0;
diff --git a/kvm-all.c b/kvm-all.c
index 37b99c7..aedfe33 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -267,14 +267,16 @@ static int kvm_dirty_pages_log_change(target_phys_addr_t phys_addr,
return kvm_set_user_memory_region(s, mem);
}
-int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size)
+static int kvm_log_start(CPUPhysMemoryClient *client,
+ target_phys_addr_t phys_addr, ram_addr_t size)
{
return kvm_dirty_pages_log_change(phys_addr, size,
KVM_MEM_LOG_DIRTY_PAGES,
KVM_MEM_LOG_DIRTY_PAGES);
}
-int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size)
+static int kvm_log_stop(CPUPhysMemoryClient *client,
+ target_phys_addr_t phys_addr, ram_addr_t size)
{
return kvm_dirty_pages_log_change(phys_addr, size,
0,
@@ -596,6 +598,8 @@ static CPUPhysMemoryClient kvm_cpu_phys_memory_client = {
.set_memory = kvm_client_set_memory,
.sync_dirty_bitmap = kvm_client_sync_dirty_bitmap,
.migration_log = kvm_client_migration_log,
+ .log_start = kvm_log_start,
+ .log_stop = kvm_log_stop,
};
int kvm_init(int smp_cpus)
diff --git a/kvm-stub.c b/kvm-stub.c
index 5384a4b..41324e4 100644
--- a/kvm-stub.c
+++ b/kvm-stub.c
@@ -33,16 +33,6 @@ int kvm_init_vcpu(CPUState *env)
return -ENOSYS;
}
-int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size)
-{
- return -ENOSYS;
-}
-
-int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size)
-{
- return -ENOSYS;
-}
-
int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size)
{
return -ENOSYS;
diff --git a/kvm.h b/kvm.h
index 60a9b42..fc77b81 100644
--- a/kvm.h
+++ b/kvm.h
@@ -49,9 +49,6 @@ int kvm_init_vcpu(CPUState *env);
int kvm_cpu_exec(CPUState *env);
#if !defined(CONFIG_USER_ONLY)
-int kvm_log_start(target_phys_addr_t phys_addr, ram_addr_t size);
-int kvm_log_stop(target_phys_addr_t phys_addr, ram_addr_t size);
-
void kvm_setup_guest_memory(void *start, size_t size);
int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size);
--
1.7.1
next prev parent reply other threads:[~2011-01-18 12:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-14 18:10 [Qemu-devel] [PATCH V2 0/3] Xen VGA dirtybit support anthony.perard
2011-01-14 18:10 ` [Qemu-devel] [PATCH V2 1/3] Introduce log_start/log_stop in CPUPhysMemoryClient anthony.perard
2011-01-17 15:54 ` [Qemu-devel] " Jan Kiszka
2011-01-17 18:25 ` Anthony PERARD
2011-01-18 12:25 ` anthony.perard [this message]
2011-01-18 18:20 ` Jan Kiszka
2011-01-14 18:10 ` [Qemu-devel] [PATCH V2 2/3] xen: Add xc_domain_add_to_physmap to xen_interface anthony.perard
2011-01-14 18:10 ` [Qemu-devel] [PATCH V2 3/3] xen: Introduce VGA sync dirty bitmap support anthony.perard
2011-01-17 15:09 ` [Qemu-devel] Re: [Xen-devel] " Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295353522-31891-1-git-send-email-anthony.perard@citrix.com \
--to=anthony.perard@citrix.com \
--cc=qemu-devel@nongnu.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).