From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, stefanha@gmail.com, hare@suse.de
Subject: [Qemu-devel] [PATCH v2 11/11] blockdev: Fix drive_add for drives without media
Date: Fri, 28 Jan 2011 11:21:46 +0100 [thread overview]
Message-ID: <1296210106-11145-12-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1296210106-11145-1-git-send-email-armbru@redhat.com>
Watch this:
(qemu) drive_add 0 if=none
(qemu) info block
none0: type=hd removable=0 [not inserted]
(qemu) drive_del none0
Segmentation fault (core dumped)
add_init_drive() is confused about drive_init()'s failure modes, and
cleans up when it shouldn't. This leaves the DriveInfo with member
opts dangling. drive_del attempts to free it, and dies.
drive_init() behaves as follows:
* If it created a drive with media, it returns its DriveInfo.
* If it created a drive without media, it clears *fatal_error and
returns NULL.
* If it couldn't create a drive, it sets *fatal_error and returns
NULL.
Of its three callers:
* drive_init_func() is correct.
* usb_msd_init() assumes drive_init() failed when it returns NULL.
This is correct only because it always passes option "file", and
"drive without media" can't happen then.
* add_init_drive() assumes drive_init() failed when it returns NULL.
This is incorrect.
Clean up drive_init() to return NULL on failure and only on failure.
Drop its parameter fatal_error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
blockdev.c | 8 ++------
blockdev.h | 2 +-
hw/device-hotplug.c | 3 +--
hw/usb-msd.c | 3 +--
vl.c | 9 ++-------
5 files changed, 7 insertions(+), 18 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 3daa0b2..ecf3098 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -203,7 +203,7 @@ static int parse_block_error_action(const char *buf, int is_read)
}
}
-DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
+DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
{
const char *buf;
const char *file = NULL;
@@ -225,8 +225,6 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
int snapshot = 0;
int ret;
- *fatal_error = 1;
-
translation = BIOS_ATA_TRANSLATION_AUTO;
if (default_to_scsi) {
@@ -499,8 +497,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
abort();
}
if (!file || !*file) {
- *fatal_error = 0;
- return NULL;
+ return dinfo;
}
if (snapshot) {
/* always use cache=unsafe with snapshot */
@@ -529,7 +526,6 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
if (bdrv_key_required(dinfo->bdrv))
autostart = 0;
- *fatal_error = 0;
return dinfo;
}
diff --git a/blockdev.h b/blockdev.h
index 4009add..50c586f 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -48,7 +48,7 @@ DriveInfo *drive_get_by_blockdev(BlockDriverState *bs);
QemuOpts *drive_def(const char *optstr);
QemuOpts *drive_add(BlockInterfaceType type, int index, const char *file,
const char *optstr);
-DriveInfo *drive_init(QemuOpts *arg, int default_to_scsi, int *fatal_error);
+DriveInfo *drive_init(QemuOpts *arg, int default_to_scsi);
/* device-hotplug */
diff --git a/hw/device-hotplug.c b/hw/device-hotplug.c
index 95a6372..8b2ed7a 100644
--- a/hw/device-hotplug.c
+++ b/hw/device-hotplug.c
@@ -29,7 +29,6 @@
DriveInfo *add_init_drive(const char *optstr)
{
- int fatal_error;
DriveInfo *dinfo;
QemuOpts *opts;
@@ -37,7 +36,7 @@ DriveInfo *add_init_drive(const char *optstr)
if (!opts)
return NULL;
- dinfo = drive_init(opts, current_machine->use_scsi, &fatal_error);
+ dinfo = drive_init(opts, current_machine->use_scsi);
if (!dinfo) {
qemu_opts_del(opts);
return NULL;
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index 11722c7..97d1e4a 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -542,7 +542,6 @@ static USBDevice *usb_msd_init(const char *filename)
QemuOpts *opts;
DriveInfo *dinfo;
USBDevice *dev;
- int fatal_error;
const char *p1;
char fmt[32];
@@ -572,7 +571,7 @@ static USBDevice *usb_msd_init(const char *filename)
qemu_opt_set(opts, "if", "none");
/* create host drive */
- dinfo = drive_init(opts, 0, &fatal_error);
+ dinfo = drive_init(opts, 0);
if (!dinfo) {
qemu_opts_del(opts);
return NULL;
diff --git a/vl.c b/vl.c
index 3637095..21d4929 100644
--- a/vl.c
+++ b/vl.c
@@ -631,13 +631,8 @@ static int bt_parse(const char *opt)
static int drive_init_func(QemuOpts *opts, void *opaque)
{
int *use_scsi = opaque;
- int fatal_error = 0;
- if (drive_init(opts, *use_scsi, &fatal_error) == NULL) {
- if (fatal_error)
- return 1;
- }
- return 0;
+ return drive_init(opts, *use_scsi) == NULL;
}
static int drive_enable_snapshot(QemuOpts *opts, void *opaque)
@@ -666,7 +661,7 @@ static void default_drive(int enable, int snapshot, int use_scsi,
if (snapshot) {
drive_enable_snapshot(opts, NULL);
}
- if (drive_init_func(opts, &use_scsi)) {
+ if (!drive_init(opts, use_scsi)) {
exit(1);
}
}
--
1.7.2.3
next prev parent reply other threads:[~2011-01-28 10:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-28 10:21 [Qemu-devel] [PATCH v2 00/11] -drive/drive_add fixes and cleanups Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 01/11] scsi hotplug: Set DriveInfo member bus correctly Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 02/11] blockdev: New drive_get_next(), replacing qdev_init_bdrv() Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 03/11] blockdev: Move BlockInterfaceType from qemu-common.h to blockdev.h Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 04/11] blockdev: Put BlockInterfaceType names and max_devs in tables Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 05/11] blockdev: Fix regression in -drive if=scsi, index=N Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 06/11] blockdev: Make drive_add() take explicit type, index parameters Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 07/11] blockdev: Replace drive_add()'s fmt, ... by optstr parameter Markus Armbruster
2011-01-31 10:50 ` [Qemu-devel] [PATCH v3 " Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 08/11] blockdev: Factor drive_index_to_{bus, unit}_id out of drive_init() Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 09/11] blockdev: New drive_get_by_index() Markus Armbruster
2011-01-28 10:21 ` [Qemu-devel] [PATCH v2 10/11] blockdev: Reject multiple definitions for the same drive Markus Armbruster
2011-01-28 10:21 ` Markus Armbruster [this message]
2011-01-31 11:00 ` [Qemu-devel] Re: [PATCH v2 00/11] -drive/drive_add fixes and cleanups Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296210106-11145-12-git-send-email-armbru@redhat.com \
--to=armbru@redhat.com \
--cc=hare@suse.de \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).