qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 22/28] blockdev: Fix regression in -drive if=scsi, index=N
Date: Mon, 31 Jan 2011 16:29:10 +0100	[thread overview]
Message-ID: <1296487756-12553-23-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1296487756-12553-1-git-send-email-kwolf@redhat.com>

From: Markus Armbruster <armbru@redhat.com>

Before commit 622b520f, index=12 meant bus=1,unit=5.

Since the commit, it means bus=0,unit=12.  The drive is created, but
not the guest device.  That's because the controllers we use with
if=scsi drives (lsi53c895a and esp) support only 7 units, and
scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers
exceeding that limit.

Changing the mapping of index to bus, unit is a regression.  Breaking
-drive invocations that used to work just makes it worse.

Revert the part of commit 622b520f that causes this, and clean up
some.

Note that the fix only affects if=scsi.  You can still put more than 7
units on a SCSI bus with -device & friends.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 blockdev.c    |   18 ++++++++++++++++--
 blockdev.h    |    3 ---
 hw/ide.h      |    2 ++
 hw/ide/ahci.c |    1 -
 hw/qdev.c     |    1 -
 hw/scsi.h     |    3 ++-
 savevm.c      |    1 -
 7 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 9c883ce..fba53f9 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -32,8 +32,22 @@ static const char *const if_name[IF_COUNT] = {
 };
 
 static const int if_max_devs[IF_COUNT] = {
-    [IF_IDE] = MAX_IDE_DEVS,
-    [IF_SCSI] = MAX_SCSI_DEVS,
+    /*
+     * Do not change these numbers!  They govern how drive option
+     * index maps to unit and bus.  That mapping is ABI.
+     *
+     * All controllers used to imlement if=T drives need to support
+     * if_max_devs[T] units, for any T with if_max_devs[T] != 0.
+     * Otherwise, some index values map to "impossible" bus, unit
+     * values.
+     *
+     * For instance, if you change [IF_SCSI] to 255, -drive
+     * if=scsi,index=12 no longer means bus=1,unit=5, but
+     * bus=0,unit=12.  With an lsi53c895a controller (7 units max),
+     * the drive can't be set up.  Regression.
+     */
+    [IF_IDE] = 2,
+    [IF_SCSI] = 7,
 };
 
 /*
diff --git a/blockdev.h b/blockdev.h
index 2cbbb87..cf8fc01 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -37,9 +37,6 @@ struct DriveInfo {
     QTAILQ_ENTRY(DriveInfo) next;
 };
 
-#define MAX_IDE_DEVS	2
-#define MAX_SCSI_DEVS	255
-
 DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit);
 int drive_get_max_bus(BlockInterfaceType type);
 DriveInfo *drive_get_next(BlockInterfaceType type);
diff --git a/hw/ide.h b/hw/ide.h
index 2b5ae7c..73fb550 100644
--- a/hw/ide.h
+++ b/hw/ide.h
@@ -4,6 +4,8 @@
 #include "isa.h"
 #include "pci.h"
 
+#define MAX_IDE_DEVS	2
+
 /* ide-isa.c */
 ISADevice *isa_ide_init(int iobase, int iobase2, int isairq,
                         DriveInfo *hd0, DriveInfo *hd1);
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 433171c..671b4df 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -70,7 +70,6 @@
 #include "monitor.h"
 #include "dma.h"
 #include "cpu-common.h"
-#include "blockdev.h"
 #include "internal.h"
 #include <hw/ide/pci.h>
 
diff --git a/hw/qdev.c b/hw/qdev.c
index 0c94fb2..c7fec44 100644
--- a/hw/qdev.c
+++ b/hw/qdev.c
@@ -29,7 +29,6 @@
 #include "qdev.h"
 #include "sysemu.h"
 #include "monitor.h"
-#include "blockdev.h"
 
 static int qdev_hotplug = 0;
 static bool qdev_hot_added = false;
diff --git a/hw/scsi.h b/hw/scsi.h
index 846fbba..d3b5d56 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -3,9 +3,10 @@
 
 #include "qdev.h"
 #include "block.h"
-#include "blockdev.h"
 #include "block_int.h"
 
+#define MAX_SCSI_DEVS	255
+
 #define SCSI_CMD_BUF_SIZE     16
 
 /* scsi-disk.c */
diff --git a/savevm.c b/savevm.c
index fcd8db4..4453217 100644
--- a/savevm.c
+++ b/savevm.c
@@ -78,7 +78,6 @@
 #include "sysemu.h"
 #include "qemu-timer.h"
 #include "qemu-char.h"
-#include "blockdev.h"
 #include "audio/audio.h"
 #include "migration.h"
 #include "qemu_socket.h"
-- 
1.7.2.3

  parent reply	other threads:[~2011-01-31 15:31 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-31 15:28 [Qemu-devel] [PULL 00/28] Block patches Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 01/28] strtosz(): use unsigned char and switch to qemu_isspace() Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 02/28] strtosz() use qemu_toupper() to simplify switch statement Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 03/28] strtosz(): Fix name confusion in use of modf() Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 04/28] strtosz(): Use suffix macros in switch() statement Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 05/28] block: add block_resize monitor command Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 06/28] block: tell drivers about an image resize Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 07/28] virtio-blk: tell the guest about size changes Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 08/28] virtio-pci: Disable virtio-ioeventfd when !CONFIG_IOTHREAD Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 09/28] Add documentation for STRTOSZ_DEFSUFFIX_ macros Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 10/28] ahci: Fix cpu_physical_memory_unmap() argument ordering Kevin Wolf
2011-01-31 15:28 ` [Qemu-devel] [PATCH 11/28] Reorganize struct Qcow2Cache for better struct packing Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 12/28] sheepdog: support creating images on remote hosts Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 13/28] qemu-io: Fix discard command Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 14/28] qcow2: Add bdrv_discard support Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 15/28] qed: Images with backing file do not require QED_F_NEED_CHECK Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 16/28] raw-win32: Fix bdrv_flush return value Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 17/28] scsi hotplug: Set DriveInfo member bus correctly Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 18/28] qcow2-refcount: remove write-only variables Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 19/28] blockdev: New drive_get_next(), replacing qdev_init_bdrv() Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 20/28] blockdev: Move BlockInterfaceType from qemu-common.h to blockdev.h Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 21/28] blockdev: Put BlockInterfaceType names and max_devs in tables Kevin Wolf
2011-01-31 15:29 ` Kevin Wolf [this message]
2011-01-31 15:29 ` [Qemu-devel] [PATCH 23/28] blockdev: Make drive_add() take explicit type, index parameters Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 24/28] blockdev: Factor drive_index_to_{bus, unit}_id out of drive_init() Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 25/28] blockdev: New drive_get_by_index() Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 26/28] blockdev: Reject multiple definitions for the same drive Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 27/28] blockdev: Replace drive_add()'s fmt, ... by optstr parameter Kevin Wolf
2011-01-31 15:29 ` [Qemu-devel] [PATCH 28/28] blockdev: Fix drive_add for drives without media Kevin Wolf
2011-01-31 18:01 ` [Qemu-devel] Re: [PULL 00/28] Block patches Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1296487756-12553-23-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).