From: Mike Frysinger <vapier@gentoo.org>
To: qemu-devel@nongnu.org, Riku Voipio <riku.voipio@iki.fi>
Subject: [Qemu-devel] [PATCH 3/9] linux-user: add ppoll syscall support
Date: Mon, 7 Feb 2011 01:05:51 -0500 [thread overview]
Message-ID: <1297058757-7611-3-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1297058757-7611-1-git-send-email-vapier@gentoo.org>
Some architectures (like Blackfin) only implement ppoll (and skip poll).
So add support for it using existing poll code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
linux-user/syscall.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 55 insertions(+), 2 deletions(-)
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 6116ab5..bb6ef43 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -529,6 +529,15 @@ static int sys_inotify_init1(int flags)
#undef TARGET_NR_inotify_rm_watch
#endif /* CONFIG_INOTIFY */
+#if defined(TARGET_NR_ppoll)
+#ifndef __NR_ppoll
+# define __NR_ppoll -1
+#endif
+#define __NR_sys_ppoll __NR_ppoll
+_syscall5(int, sys_ppoll, struct pollfd *, fds, nfds_t, nfds,
+ struct timespec *, timeout, const __sigset_t *, sigmask,
+ size_t, sigsetsize)
+#endif
extern int personality(int);
extern int flock(int, int);
@@ -6230,8 +6239,13 @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
ret = do_select(arg1, arg2, arg3, arg4, arg5);
break;
#endif
-#ifdef TARGET_NR_poll
+#if defined(TARGET_NR_poll) || defined(TARGET_NR_ppoll)
+# ifdef TARGET_NR_poll
case TARGET_NR_poll:
+# endif
+# ifdef TARGET_NR_ppoll
+ case TARGET_NR_ppoll:
+# endif
{
struct target_pollfd *target_pfd;
unsigned int nfds = arg2;
@@ -6242,12 +6256,51 @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
target_pfd = lock_user(VERIFY_WRITE, arg1, sizeof(struct target_pollfd) * nfds, 1);
if (!target_pfd)
goto efault;
+
pfd = alloca(sizeof(struct pollfd) * nfds);
for(i = 0; i < nfds; i++) {
pfd[i].fd = tswap32(target_pfd[i].fd);
pfd[i].events = tswap16(target_pfd[i].events);
}
- ret = get_errno(poll(pfd, nfds, timeout));
+
+# ifdef TARGET_NR_ppoll
+ if (num == TARGET_NR_ppoll) {
+ struct timespec _timeout_ts, *timeout_ts = &_timeout_ts;
+ target_sigset_t *target_set;
+ sigset_t _set, *set = &_set;
+
+ if (arg3) {
+ if (target_to_host_timespec(timeout_ts, arg3)) {
+ unlock_user(target_pfd, arg1, 0);
+ goto efault;
+ }
+ } else {
+ timeout_ts = NULL;
+ }
+
+ if (arg4) {
+ target_set = lock_user(VERIFY_READ, arg4, sizeof(target_sigset_t), 1);
+ if (!target_set) {
+ unlock_user(target_pfd, arg1, 0);
+ goto efault;
+ }
+ target_to_host_sigset(set, target_set);
+ } else {
+ set = NULL;
+ }
+
+ ret = get_errno(sys_ppoll(pfd, nfds, timeout_ts, set, _NSIG/8));
+
+ if (!is_error(ret) && arg3) {
+ host_to_target_timespec(arg3, timeout_ts);
+ }
+ if (arg4) {
+ unlock_user(target_set, arg4, 0);
+ }
+ } else
+# endif
+ ret = get_errno(poll(pfd, nfds, timeout));
+
if (!is_error(ret)) {
for(i = 0; i < nfds; i++) {
target_pfd[i].revents = tswap16(pfd[i].revents);
--
1.7.4
next prev parent reply other threads:[~2011-02-07 6:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-07 6:05 [Qemu-devel] [PATCH 1/9] linux-user: fix sizeof handling for getsockopt Mike Frysinger
2011-02-07 6:05 ` [Qemu-devel] [PATCH 2/9] linux-user/elfload: add FDPIC support Mike Frysinger
2011-02-07 6:05 ` Mike Frysinger [this message]
2011-02-07 6:05 ` [Qemu-devel] [PATCH 4/9] linux-user: decode MAP_{UNINITIALIZED, EXECUTABLE} in strace Mike Frysinger
2011-02-07 6:05 ` [Qemu-devel] [PATCH 5/9] linux-user/FLAT: fix auto-stack sizing Mike Frysinger
2011-02-07 6:05 ` [Qemu-devel] [PATCH 6/9] linux-user/FLAT: allow targets to override FLAT processing Mike Frysinger
2011-02-07 6:05 ` [Qemu-devel] [PATCH 7/9] linux-user: implement sched_{g, s}etaffinity Mike Frysinger
2011-02-07 6:05 ` [Qemu-devel] [PATCH 8/9] user: speed up init_paths a bit Mike Frysinger
2011-02-07 6:05 ` [Qemu-devel] [PATCH 9/9] linux-user: fix build errors for mmap2-only ports Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297058757-7611-3-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=qemu-devel@nongnu.org \
--cc=riku.voipio@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).