qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 3/4] target-arm: Implement cp15 VA->PA translation
Date: Sat,  5 Mar 2011 13:51:44 +0100	[thread overview]
Message-ID: <1299329505-7379-4-git-send-email-adam@os.inf.tu-dresden.de> (raw)
In-Reply-To: <1299329505-7379-1-git-send-email-adam@os.inf.tu-dresden.de>

Implement VA->PA translations by cp15-c7 that went through unchanged
previously.

Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
---
 target-arm/cpu.h     |    3 ++-
 target-arm/helper.c  |   48 ++++++++++++++++++++++++++++++++++++++++++++++--
 target-arm/machine.c |    2 ++
 3 files changed, 50 insertions(+), 3 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index c9febfa..1ae7982 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -126,6 +126,7 @@ typedef struct CPUARMState {
         uint32_t c6_region[8]; /* MPU base/size registers.  */
         uint32_t c6_insn; /* Fault address registers.  */
         uint32_t c6_data;
+        uint32_t c7_par;  /* Translation result. */
         uint32_t c9_insn; /* Cache lockdown registers.  */
         uint32_t c9_data;
         uint32_t c13_fcse; /* FCSE PID.  */
@@ -428,7 +429,7 @@ void cpu_arm_set_cp_io(CPUARMState *env, int cpnum,
 #define cpu_signal_handler cpu_arm_signal_handler
 #define cpu_list arm_cpu_list
 
-#define CPU_SAVE_VERSION 2
+#define CPU_SAVE_VERSION 3
 
 /* MMU modes definitions */
 #define MMU_MODE0_SUFFIX _kernel
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 1852352..d360121 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1456,8 +1456,49 @@ void HELPER(set_cp15)(CPUState *env, uint32_t insn, uint32_t val)
     case 7: /* Cache control.  */
         env->cp15.c15_i_max = 0x000;
         env->cp15.c15_i_min = 0xff0;
-        /* No cache, so nothing to do.  */
-        /* ??? MPCore has VA to PA translation functions.  */
+        if (op1 != 0) {
+            goto bad_reg;
+        }
+        /* No cache, so nothing to do except VA->PA translations. */
+        if (arm_feature(env, ARM_FEATURE_V6K)) {
+            switch (crm) {
+            case 4:
+                if (arm_feature(env, ARM_FEATURE_V7)) {
+                    env->cp15.c7_par = val & 0xfffff6ff;
+                } else {
+                    env->cp15.c7_par = val & 0xfffff1ff;
+                }
+                break;
+            case 8: {
+                uint32_t phys_addr;
+                target_ulong page_size;
+                int prot;
+                int ret, is_user = op2 & 2;
+                int access_type = op2 & 1;
+
+                if (op2 & 4) {
+                    /* Other states are only available with TrustZone */
+                    goto bad_reg;
+                }
+                ret = get_phys_addr(env, val, access_type, is_user,
+                                    &phys_addr, &prot, &page_size);
+                if (ret == 0) {
+                    /* We do not set any attribute bits in the PAR */
+                    if (page_size == (1 << 24)
+                        && arm_feature(env, ARM_FEATURE_V7)) {
+                        env->cp15.c7_par = (phys_addr & 0xff000000) | 1 << 1;
+                    } else {
+                        env->cp15.c7_par = phys_addr & 0xfffff000;
+                    }
+                } else {
+                    env->cp15.c7_par = ((ret & (10 << 1)) >> 5) |
+                                       ((ret & (12 << 1)) >> 6) |
+                                       ((ret & 0xf) << 1) | 1;
+                }
+                break;
+            }
+            }
+        }
         break;
     case 8: /* MMU TLB control.  */
         switch (op2) {
@@ -1789,6 +1830,9 @@ uint32_t HELPER(get_cp15)(CPUState *env, uint32_t insn)
 	    }
         }
     case 7: /* Cache control.  */
+        if (crm == 4 && op1 == 0 && op2 == 0) {
+            return env->cp15.c7_par;
+        }
         /* FIXME: Should only clear Z flag if destination is r15.  */
         env->ZF = 0;
         return 0;
diff --git a/target-arm/machine.c b/target-arm/machine.c
index 3925d3a..a18b7dc 100644
--- a/target-arm/machine.c
+++ b/target-arm/machine.c
@@ -41,6 +41,7 @@ void cpu_save(QEMUFile *f, void *opaque)
     }
     qemu_put_be32(f, env->cp15.c6_insn);
     qemu_put_be32(f, env->cp15.c6_data);
+    qemu_put_be32(f, env->cp15.c7_par);
     qemu_put_be32(f, env->cp15.c9_insn);
     qemu_put_be32(f, env->cp15.c9_data);
     qemu_put_be32(f, env->cp15.c13_fcse);
@@ -148,6 +149,7 @@ int cpu_load(QEMUFile *f, void *opaque, int version_id)
     }
     env->cp15.c6_insn = qemu_get_be32(f);
     env->cp15.c6_data = qemu_get_be32(f);
+    env->cp15.c7_par = qemu_get_be32(f);
     env->cp15.c9_insn = qemu_get_be32(f);
     env->cp15.c9_data = qemu_get_be32(f);
     env->cp15.c13_fcse = qemu_get_be32(f);
-- 
1.7.4.1

  parent reply	other threads:[~2011-03-05 12:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-05 12:51 [Qemu-devel] [PATCH 0/4] ARM additions and fixes Adam Lackorzynski
2011-03-05 12:51 ` [Qemu-devel] [PATCH 1/4] target-arm: Fix soft interrupt in GIC distributor Adam Lackorzynski
2011-03-05 12:51 ` [Qemu-devel] [PATCH 2/4] target-arm: Don't decode old cp15 WFI instructions on v7 cores Adam Lackorzynski
2011-03-05 12:51 ` Adam Lackorzynski [this message]
2011-03-05 12:51 ` [Qemu-devel] [PATCH 4/4] target-arm: Integrate secondary CPU reset in arm_boot Adam Lackorzynski
2011-03-07  8:25 ` [Qemu-devel] [PATCH 0/4] ARM additions and fixes Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1299329505-7379-4-git-send-email-adam@os.inf.tu-dresden.de \
    --to=adam@os.inf.tu-dresden.de \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).