qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Poirier <benjamin.poirier@gmail.com>
To: qemu-devel@nongnu.org
Cc: Blue Swirl <blauwirbel@gmail.com>,
	Jason Wang <jasowang@redhat.com>,
	"Michael S. Tsirkin" <mst@redhat.com>
Subject: [Qemu-devel] [PATCH v5 2/3] rtl8139: add vlan tag extraction
Date: Mon,  7 Mar 2011 17:53:33 -0500	[thread overview]
Message-ID: <1299538414-22208-3-git-send-email-benjamin.poirier@gmail.com> (raw)
In-Reply-To: <1299538414-22208-1-git-send-email-benjamin.poirier@gmail.com>

Add support to the emulated hardware to extract vlan tags in packets
going from the network to the guest.

Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>

--

AFAIK, extraction is optional to get vlans working. The driver
requests rx detagging but should not assume that it was done. Under
Linux, the mac layer will catch the vlan ethertype. I only added this
part for completeness (to emulate the hardware more truthfully...)
---
 hw/rtl8139.c |   86 +++++++++++++++++++++++++++++++++++++++++++++------------
 1 files changed, 68 insertions(+), 18 deletions(-)

diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index 3772ac1..55a386e 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -72,6 +72,16 @@
 #define MOD2(input, size) \
     ( ( input ) & ( size - 1 )  )
 
+#define ETHER_ADDR_LEN 6
+#define ETHER_TYPE_LEN 2
+#define ETH_HLEN (ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN)
+#define ETH_P_8021Q 0x8100      /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IP    0x0800      /* Internet Protocol packet */
+#define ETH_MTU     1500
+
+#define VLAN_TCI_LEN 2
+#define VLAN_HLEN (ETHER_TYPE_LEN + VLAN_TCI_LEN)
+
 #if defined (DEBUG_RTL8139)
 #  define DEBUG_PRINT(x) do { printf x ; } while (0)
 #else
@@ -813,10 +823,13 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
 {
     RTL8139State *s = DO_UPCAST(NICState, nc, nc)->opaque;
     int size = size_;
+    const uint8_t *dot1q_buf;
+    const uint8_t *next_part;
+    size_t next_part_size;
 
     uint32_t packet_header = 0;
 
-    uint8_t buf1[60];
+    uint8_t buf1[MIN_BUF_SIZE];
     static const uint8_t broadcast_macaddr[6] =
         { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 
@@ -928,14 +941,6 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         }
     }
 
-    /* if too small buffer, then expand it */
-    if (size < MIN_BUF_SIZE) {
-        memcpy(buf1, buf, size);
-        memset(buf1 + size, 0, MIN_BUF_SIZE - size);
-        buf = buf1;
-        size = MIN_BUF_SIZE;
-    }
-
     if (rtl8139_cp_receiver_enabled(s))
     {
         DEBUG_PRINT(("RTL8139: in C+ Rx mode ================\n"));
@@ -996,6 +1001,40 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
 
         uint32_t rx_space = rxdw0 & CP_RX_BUFFER_SIZE_MASK;
 
+        /* write VLAN info to descriptor variables */
+        /* next_part starts right after the vlan header (if any), at the
+         * ethertype for the payload */
+        next_part = &buf[ETHER_ADDR_LEN * 2];
+        if (s->CpCmd & CPlusRxVLAN && be16_to_cpup((uint16_t *) next_part) ==
+            ETH_P_8021Q) {
+            dot1q_buf = next_part;
+            next_part += VLAN_HLEN;
+            size -= VLAN_HLEN;
+
+            rxdw1 &= ~CP_RX_VLAN_TAG_MASK;
+            /* BE + ~le_to_cpu()~ + cpu_to_le() = BE */
+            rxdw1 |= CP_RX_TAVA | le16_to_cpup((uint16_t *) &buf[ETH_HLEN]);
+
+            DEBUG_PRINT(("RTL8139: C+ Rx mode : extracted vlan tag with tci: "
+                    "%u\n", be16_to_cpup((uint16_t *) &buf[ETH_HLEN])));
+        } else {
+            /* reset VLAN tag flag */
+            rxdw1 &= ~CP_RX_TAVA;
+            dot1q_buf = NULL;
+        }
+        next_part_size = buf + size_ - next_part;
+
+        /* if too small buffer, then expand it */
+        if (size < MIN_BUF_SIZE) {
+            size_t tmp_size = MIN_BUF_SIZE - ETHER_ADDR_LEN * 2;
+
+            memcpy(buf1, next_part, next_part_size);
+            memset(buf1 + next_part_size, 0, tmp_size - next_part_size);
+            next_part = buf1;
+            next_part_size = tmp_size;
+            size = MIN_BUF_SIZE;
+        }
+
         /* TODO: scatter the packet over available receive ring descriptors space */
 
         if (size+4 > rx_space)
@@ -1017,7 +1056,17 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         target_phys_addr_t rx_addr = rtl8139_addr64(rxbufLO, rxbufHI);
 
         /* receive/copy to target memory */
-        cpu_physical_memory_write( rx_addr, buf, size );
+        if (dot1q_buf) {
+            cpu_physical_memory_write(rx_addr, buf, 2 * ETHER_ADDR_LEN);
+            val = crc32(0, buf, 2 * ETHER_ADDR_LEN);
+            val = crc32(val, dot1q_buf, VLAN_HLEN);
+            cpu_physical_memory_write(rx_addr + 2 * ETHER_ADDR_LEN, next_part,
+                next_part_size);
+            val = crc32(val, buf + 2 * ETHER_ADDR_LEN, next_part_size);
+        } else {
+            cpu_physical_memory_write(rx_addr, buf, size);
+            val = crc32(0, buf, size);
+        }
 
         if (s->CpCmd & CPlusRxChkSum)
         {
@@ -1025,7 +1074,7 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         }
 
         /* write checksum */
-        val = cpu_to_le32(crc32(0, buf, size));
+        val = cpu_to_le32(val);
         cpu_physical_memory_write( rx_addr+size, (uint8_t *)&val, 4);
 
 /* first segment of received packet flag */
@@ -1070,9 +1119,6 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         rxdw0 &= ~CP_RX_BUFFER_SIZE_MASK;
         rxdw0 |= (size+4);
 
-        /* reset VLAN tag flag */
-        rxdw1 &= ~CP_RX_TAVA;
-
         /* update ring data */
         val = cpu_to_le32(rxdw0);
         cpu_physical_memory_write(cplus_rx_ring_desc,    (uint8_t *)&val, 4);
@@ -1099,6 +1145,14 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
     {
         DEBUG_PRINT(("RTL8139: in ring Rx mode ================\n"));
 
+        /* if too small buffer, then expand it */
+        if (size < MIN_BUF_SIZE) {
+            memcpy(buf1, buf, size);
+            memset(buf1 + size, 0, MIN_BUF_SIZE - size);
+            buf = buf1;
+            size = MIN_BUF_SIZE;
+        }
+
         /* begin ring receiver mode */
         int avail = MOD2(s->RxBufferSize + s->RxBufPtr - s->RxBufAddr, s->RxBufferSize);
 
@@ -2066,10 +2120,6 @@ static int rtl8139_cplus_transmit_one(RTL8139State *s)
         {
             DEBUG_PRINT(("RTL8139: +++ C+ mode offloaded task checksum\n"));
 
-            #define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-            #define ETH_HLEN    14
-            #define ETH_MTU     1500
-
             /* ip packet header */
             ip_header *ip = NULL;
             int hlen = 0;
-- 
1.7.2.3

  parent reply	other threads:[~2011-03-07 22:54 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-07 22:53 [Qemu-devel] [PATCH v5] rtl8139: add vlan support Benjamin Poirier
2011-03-07 22:53 ` [Qemu-devel] [PATCH v5 1/3] rtl8139: cleanup FCS calculation Benjamin Poirier
2011-03-07 22:53 ` Benjamin Poirier [this message]
2011-03-08  3:44   ` [Qemu-devel] [PATCH v5 2/3] rtl8139: add vlan tag extraction Jason Wang
2011-03-07 22:53 ` [Qemu-devel] [PATCH v5 3/3] rtl8139: add vlan tag insertion Benjamin Poirier
2011-03-08  6:44   ` Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1299538414-22208-3-git-send-email-benjamin.poirier@gmail.com \
    --to=benjamin.poirier@gmail.com \
    --cc=blauwirbel@gmail.com \
    --cc=jasowang@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).