From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: blauwirbel@gmail.com
Subject: [Qemu-devel] [PATCH v4 upstream 10/21] always qemu_cpu_kick after unhalting a cpu
Date: Sat, 12 Mar 2011 17:43:57 +0100 [thread overview]
Message-ID: <1299948248-30206-11-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1299948248-30206-1-git-send-email-pbonzini@redhat.com>
This ensures env->halt_cond is broadcast, and the loop in
qemu_tcg_wait_io_event and qemu_kvm_wait_io_event is exited
naturally rather than through a timeout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/ppc.c | 2 ++
hw/sun4m.c | 10 ++++++++--
hw/sun4u.c | 4 ++--
target-s390x/kvm.c | 1 +
4 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/hw/ppc.c b/hw/ppc.c
index 968aec1..de02d33 100644
--- a/hw/ppc.c
+++ b/hw/ppc.c
@@ -208,6 +208,7 @@ static void ppc970_set_irq (void *opaque, int pin, int level)
} else {
LOG_IRQ("%s: restart the CPU\n", __func__);
env->halted = 0;
+ qemu_cpu_kick(env);
}
break;
case PPC970_INPUT_HRESET:
@@ -300,6 +301,7 @@ static void ppc40x_set_irq (void *opaque, int pin, int level)
} else {
LOG_IRQ("%s: restart the CPU\n", __func__);
env->halted = 0;
+ qemu_cpu_kick(env);
}
break;
case PPC40x_INPUT_DEBUG:
diff --git a/hw/sun4m.c b/hw/sun4m.c
index 30e8a21..df3aa32 100644
--- a/hw/sun4m.c
+++ b/hw/sun4m.c
@@ -253,15 +253,21 @@ void cpu_check_irqs(CPUState *env)
}
}
+static void cpu_kick_irq(CPUState *env)
+{
+ env->halted = 0;
+ cpu_check_irqs(env);
+ qemu_cpu_kick(env);
+}
+
static void cpu_set_irq(void *opaque, int irq, int level)
{
CPUState *env = opaque;
if (level) {
trace_sun4m_cpu_set_irq_raise(irq);
- env->halted = 0;
env->pil_in |= 1 << irq;
- cpu_check_irqs(env);
+ cpu_kick_irq(env);
} else {
trace_sun4m_cpu_set_irq_lower(irq);
env->pil_in &= ~(1 << irq);
diff --git a/hw/sun4u.c b/hw/sun4u.c
index 90b1ce2..d282324 100644
--- a/hw/sun4u.c
+++ b/hw/sun4u.c
@@ -298,6 +298,7 @@ static void cpu_kick_irq(CPUState *env)
{
env->halted = 0;
cpu_check_irqs(env);
+ qemu_cpu_kick(env);
}
static void cpu_set_irq(void *opaque, int irq, int level)
@@ -306,9 +307,8 @@ static void cpu_set_irq(void *opaque, int irq, int level)
if (level) {
CPUIRQ_DPRINTF("Raise CPU IRQ %d\n", irq);
- env->halted = 0;
env->pil_in |= 1 << irq;
- cpu_check_irqs(env);
+ cpu_kick_irq(env);
} else {
CPUIRQ_DPRINTF("Lower CPU IRQ %d\n", irq);
env->pil_in &= ~(1 << irq);
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index b349812..6e94274 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -194,6 +194,7 @@ static void kvm_s390_interrupt_internal(CPUState *env, int type, uint32_t parm,
env->halted = 0;
env->exception_index = -1;
+ qemu_cpu_kick(env);
kvmint.type = type;
kvmint.parm = parm;
--
1.7.4
next prev parent reply other threads:[~2011-03-12 16:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-12 16:43 [Qemu-devel] [PATCH v4 upstream 00/21] Win32 iothread support Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 01/21] unlock iothread during WaitForMultipleObjects Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 02/21] implement win32 dynticks timer Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 03/21] use win32 timer queues Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 04/21] Refactor thread retrieval and check Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 05/21] add win32 qemu-thread implementation Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 06/21] include qemu-thread.h early Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 07/21] add assertions on the owner of a QemuMutex Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 08/21] remove CONFIG_THREAD Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 09/21] inline cpu_halted into sole caller Paolo Bonzini
2011-03-12 16:43 ` Paolo Bonzini [this message]
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 11/21] exit round-robin vcpu loop if cpu->stopped is true Paolo Bonzini
2011-03-12 16:43 ` [Qemu-devel] [PATCH v4 upstream 12/21] always signal pause_cond after stopping a VCPU Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 13/21] do not use timedwait on qemu_halt_cond Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 14/21] do not use timedwait on qemu_system_cond Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 15/21] do not use timedwait on qemu_pause_cond Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 16/21] do not use timedwait on qemu_cpu_cond Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 17/21] iothread stops the vcpu thread via IPI Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 18/21] merge all signal initialization with qemu_signalfd_init, rename Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 19/21] provide dummy signal init functions for win32 Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 20/21] protect qemu_cpu_kick_self for Win32 Paolo Bonzini
2011-03-12 16:44 ` [Qemu-devel] [PATCH v4 upstream 21/21] add Win32 IPI service Paolo Bonzini
2011-03-13 14:45 ` [Qemu-devel] Re: [PATCH v4 upstream 00/21] Win32 iothread support Blue Swirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299948248-30206-11-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=blauwirbel@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).