qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Poirier <benjamin.poirier@gmail.com>
To: qemu-devel@nongnu.org
Cc: Blue Swirl <blauwirbel@gmail.com>,
	Jason Wang <jasowang@redhat.com>,
	"Michael S. Tsirkin" <mst@redhat.com>
Subject: [Qemu-devel] [PATCH v7 2/3] rtl8139: add vlan tag extraction
Date: Tue, 22 Mar 2011 19:11:22 -0400	[thread overview]
Message-ID: <1300835483-2266-3-git-send-email-benjamin.poirier@gmail.com> (raw)
In-Reply-To: <1300835483-2266-1-git-send-email-benjamin.poirier@gmail.com>

Add support to the emulated hardware to extract vlan tags in packets
going from the network to the guest.

Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>

--

AFAIK, extraction is optional to get vlans working. The driver
requests rx detagging but should not assume that it was done. Under
Linux, the mac layer will catch the vlan ethertype. I only added this
part for completeness (to emulate the hardware more truthfully...)
---
 hw/rtl8139.c |   66 +++++++++++++++++++++++++++++++++++++++++++++------------
 1 files changed, 52 insertions(+), 14 deletions(-)

diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index d843aa0..5b2f489 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -72,6 +72,16 @@
 #define MOD2(input, size) \
     ( ( input ) & ( size - 1 )  )
 
+#define ETHER_ADDR_LEN 6
+#define ETHER_TYPE_LEN 2
+#define ETH_HLEN (ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN)
+#define ETH_P_IP    0x0800      /* Internet Protocol packet */
+#define ETH_P_8021Q 0x8100      /* 802.1Q VLAN Extended Header  */
+#define ETH_MTU     1500
+
+#define VLAN_TCI_LEN 2
+#define VLAN_HLEN (ETHER_TYPE_LEN + VLAN_TCI_LEN)
+
 #if defined (DEBUG_RTL8139)
 #  define DEBUG_PRINT(x) do { printf x ; } while (0)
 #else
@@ -812,11 +822,13 @@ static int rtl8139_can_receive(VLANClientState *nc)
 static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_t size_, int do_interrupt)
 {
     RTL8139State *s = DO_UPCAST(NICState, nc, nc)->opaque;
+    /* size is the length of the buffer passed to the driver */
     int size = size_;
+    const uint8_t *dot1q_buf = NULL;
 
     uint32_t packet_header = 0;
 
-    uint8_t buf1[60];
+    uint8_t buf1[MIN_BUF_SIZE + VLAN_HLEN];
     static const uint8_t broadcast_macaddr[6] =
         { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 
@@ -928,12 +940,15 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         }
     }
 
-    /* if too small buffer, then expand it */
-    if (size < MIN_BUF_SIZE) {
+    /* if too small buffer, then expand it
+     * Include some tailroom in case a vlan tag is later removed. */
+    if (size < MIN_BUF_SIZE + VLAN_HLEN) {
         memcpy(buf1, buf, size);
-        memset(buf1 + size, 0, MIN_BUF_SIZE - size);
+        memset(buf1 + size, 0, MIN_BUF_SIZE + VLAN_HLEN - size);
         buf = buf1;
-        size = MIN_BUF_SIZE;
+        if (size < MIN_BUF_SIZE) {
+            size = MIN_BUF_SIZE;
+        }
     }
 
     if (rtl8139_cp_receiver_enabled(s))
@@ -996,6 +1011,29 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
 
         uint32_t rx_space = rxdw0 & CP_RX_BUFFER_SIZE_MASK;
 
+        /* write VLAN info to descriptor variables. */
+        if (s->CpCmd & CPlusRxVLAN && be16_to_cpup((uint16_t *)
+                &buf[ETHER_ADDR_LEN * 2]) == ETH_P_8021Q) {
+            dot1q_buf = &buf[ETHER_ADDR_LEN * 2];
+            size -= VLAN_HLEN;
+            /* if too small buffer, use the tailroom added duing expansion */
+            if (size < MIN_BUF_SIZE) {
+                size = MIN_BUF_SIZE;
+            }
+
+            rxdw1 &= ~CP_RX_VLAN_TAG_MASK;
+            /* BE + ~le_to_cpu()~ + cpu_to_le() = BE */
+            rxdw1 |= CP_RX_TAVA | le16_to_cpup((uint16_t *)
+                &dot1q_buf[ETHER_TYPE_LEN]);
+
+            DEBUG_PRINT(("RTL8139: C+ Rx mode : extracted vlan tag with tci: "
+                    "%u\n", be16_to_cpup((uint16_t *)
+                        &dot1q_buf[ETHER_TYPE_LEN])));
+        } else {
+            /* reset VLAN tag flag */
+            rxdw1 &= ~CP_RX_TAVA;
+        }
+
         /* TODO: scatter the packet over available receive ring descriptors space */
 
         if (size+4 > rx_space)
@@ -1017,7 +1055,14 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         target_phys_addr_t rx_addr = rtl8139_addr64(rxbufLO, rxbufHI);
 
         /* receive/copy to target memory */
-        cpu_physical_memory_write( rx_addr, buf, size );
+        if (dot1q_buf) {
+            cpu_physical_memory_write(rx_addr, buf, 2 * ETHER_ADDR_LEN);
+            cpu_physical_memory_write(rx_addr + 2 * ETHER_ADDR_LEN,
+                buf + 2 * ETHER_ADDR_LEN + VLAN_HLEN,
+                size - 2 * ETHER_ADDR_LEN);
+        } else {
+            cpu_physical_memory_write(rx_addr, buf, size);
+        }
 
         if (s->CpCmd & CPlusRxChkSum)
         {
@@ -1025,7 +1070,7 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         }
 
         /* write checksum */
-        val = cpu_to_le32(crc32(0, buf, size));
+        val = cpu_to_le32(crc32(0, buf, size_));
         cpu_physical_memory_write( rx_addr+size, (uint8_t *)&val, 4);
 
 /* first segment of received packet flag */
@@ -1070,9 +1115,6 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
         rxdw0 &= ~CP_RX_BUFFER_SIZE_MASK;
         rxdw0 |= (size+4);
 
-        /* reset VLAN tag flag */
-        rxdw1 &= ~CP_RX_TAVA;
-
         /* update ring data */
         val = cpu_to_le32(rxdw0);
         cpu_physical_memory_write(cplus_rx_ring_desc,    (uint8_t *)&val, 4);
@@ -2054,10 +2096,6 @@ static int rtl8139_cplus_transmit_one(RTL8139State *s)
         {
             DEBUG_PRINT(("RTL8139: +++ C+ mode offloaded task checksum\n"));
 
-            #define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-            #define ETH_HLEN    14
-            #define ETH_MTU     1500
-
             /* ip packet header */
             ip_header *ip = NULL;
             int hlen = 0;
-- 
1.7.4.1

  parent reply	other threads:[~2011-03-22 23:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-22 23:11 [Qemu-devel] [PATCH v7] rtl8139: add vlan support Benjamin Poirier
2011-03-22 23:11 ` [Qemu-devel] [PATCH v7 1/3] rtl8139: cleanup FCS calculation Benjamin Poirier
2011-03-22 23:11 ` Benjamin Poirier [this message]
2011-03-22 23:11 ` [Qemu-devel] [PATCH v7 3/3] rtl8139: add vlan tag insertion Benjamin Poirier
2011-03-24  9:20 ` [Qemu-devel] [PATCH v7] rtl8139: add vlan support Jason Wang
2011-03-26 11:34 ` Blue Swirl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1300835483-2266-3-git-send-email-benjamin.poirier@gmail.com \
    --to=benjamin.poirier@gmail.com \
    --cc=blauwirbel@gmail.com \
    --cc=jasowang@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).