From: Alexander Graf <agraf@suse.de>
To: QEMU-devel Developers <qemu-devel@nongnu.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL] PowerPC patch queue
Date: Fri, 1 Apr 2011 18:43:33 +0200 [thread overview]
Message-ID: <1301676213-9115-1-git-send-email-agraf@suse.de> (raw)
Howdy,
this is the current patch queue for PowerPC. I'm very excited this time,
as we finally have a real PPC64 target machine available to play with!
I also included a patch from Aurelien that he seems to have forgotten to
push.
Alex
The following changes since commit a5086f95421e43c7b9e1b28a111aae0be4848117:
Michael Walle (1):
lm32: use lookup table for opcodes
are available in the git repository at:
git://repo.or.cz/qemu/agraf.git ppc-next
Aurelien Jarno (1):
target-ppc: ext32u instead of andi with constant
Ben Herrenschmidt (3):
Implement PAPR CRQ hypercalls
Implement PAPR virtual SCSI interface (ibmvscsi)
Add a PAPR TCE-bypass mechanism for the pSeries machine
David Gibson (24):
Clean up PowerPC SLB handling code
Allow qemu_devtree_setprop() to take arbitrary values
Add a hook to allow hypercalls to be emulated on PowerPC
Implement PowerPC slbmfee and slbmfev instructions
Implement missing parts of the logic for the POWER PURR
Correct ppc popcntb logic, implement popcntw and popcntd
Clean up slb_lookup() function
Parse SDR1 on mtspr instead of at translate time
Use "hash" more consistently in ppc mmu code
Better factor the ppc hash translation path
Support 1T segments on ppc
Add POWER7 support for ppc
Start implementing pSeries logical partition machine
Implement the bus structure for PAPR virtual IO
Virtual hash page table handling on pSeries machine
Implement hcall based RTAS for pSeries machines
Implement assorted pSeries hcalls and RTAS methods
Implement the PAPR (pSeries) virtualized interrupt controller (xics)
Add PAPR H_VIO_SIGNAL hypercall and infrastructure for VIO interrupts
Add (virtual) interrupt to PAPR virtual tty device
Implement TCE translation for sPAPR VIO
Implement sPAPR Virtual LAN (ibmveth)
Implement PAPR VPA functions for pSeries shared processor partitions
Add SLOF-based partition firmware for pSeries machine, allowing more boot options
.gitmodules | 3 +
Makefile | 3 +-
Makefile.target | 5 +
configure | 4 +-
device_tree.c | 2 +-
device_tree.h | 2 +-
hw/ppc-viosrp.h | 216 +++++++++
hw/ppc.c | 35 ++
hw/ppc.h | 1 +
hw/spapr.c | 456 ++++++++++++++++++
hw/spapr.h | 294 ++++++++++++
hw/spapr_hcall.c | 525 +++++++++++++++++++++
hw/spapr_llan.c | 521 +++++++++++++++++++++
hw/spapr_rtas.c | 278 +++++++++++
hw/spapr_vio.c | 731 +++++++++++++++++++++++++++++
hw/spapr_vio.h | 112 +++++
hw/spapr_vscsi.c | 988 +++++++++++++++++++++++++++++++++++++++
hw/spapr_vty.c | 159 +++++++
hw/srp.h | 240 ++++++++++
hw/xics.c | 486 +++++++++++++++++++
hw/xics.h | 39 ++
monitor.c | 2 +-
pc-bios/README | 5 +
pc-bios/slof.bin | Bin 0 -> 579072 bytes
pc-bios/spapr-rtas.bin | Bin 0 -> 20 bytes
pc-bios/spapr-rtas/Makefile | 24 +
pc-bios/spapr-rtas/spapr-rtas.S | 37 ++
roms/SLOF | 1 +
target-ppc/cpu.h | 84 ++++-
target-ppc/helper.c | 451 +++++++++----------
target-ppc/helper.h | 7 +-
target-ppc/kvm.c | 2 +-
target-ppc/kvm_ppc.h | 11 +
target-ppc/machine.c | 6 +-
target-ppc/op_helper.c | 87 +++-
target-ppc/translate.c | 61 ++-
target-ppc/translate_init.c | 122 +++++-
37 files changed, 5723 insertions(+), 277 deletions(-)
create mode 100644 hw/ppc-viosrp.h
create mode 100644 hw/spapr.c
create mode 100644 hw/spapr.h
create mode 100644 hw/spapr_hcall.c
create mode 100644 hw/spapr_llan.c
create mode 100644 hw/spapr_rtas.c
create mode 100644 hw/spapr_vio.c
create mode 100644 hw/spapr_vio.h
create mode 100644 hw/spapr_vscsi.c
create mode 100644 hw/spapr_vty.c
create mode 100644 hw/srp.h
create mode 100644 hw/xics.c
create mode 100644 hw/xics.h
create mode 100644 pc-bios/slof.bin
create mode 100755 pc-bios/spapr-rtas.bin
create mode 100644 pc-bios/spapr-rtas/Makefile
create mode 100644 pc-bios/spapr-rtas/spapr-rtas.S
create mode 160000 roms/SLOF
next reply other threads:[~2011-04-01 16:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-01 16:43 Alexander Graf [this message]
2011-04-01 17:29 ` [Qemu-devel] [PULL] PowerPC patch queue Anthony Liguori
2011-04-01 17:44 ` Scott Wood
2011-04-01 17:49 ` Alexander Graf
2011-04-01 17:57 ` Scott Wood
-- strict thread matches above, loose matches on Subject: below --
2011-04-08 10:25 Alexander Graf
2011-04-08 12:40 ` Edgar E. Iglesias
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301676213-9115-1-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).