From: Ulrich Obergfell <uobergfe@redhat.com>
To: qemu-devel@nongnu.org
Cc: aliguori@us.ibm.com, kvm@vger.kernel.org, jan.kiszka@siemens.com,
uobergfe@redhat.com, gcosta@redhat.com, avi@redhat.com
Subject: [Qemu-devel] [PATCH v3 5/5] hpet 'driftfix': add code in hpet_timer() to compensate delayed callbacks and coalesced interrupts
Date: Thu, 28 Apr 2011 16:25:00 +0200 [thread overview]
Message-ID: <1304000700-3640-6-git-send-email-uobergfe@redhat.com> (raw)
In-Reply-To: <1304000700-3640-1-git-send-email-uobergfe@redhat.com>
Loss of periodic timer interrupts caused by delayed callbacks and by
interrupt coalescing is compensated by gradually injecting additional
interrupts during subsequent timer intervals, starting at a rate of
one additional interrupt per interval. The injection of additional
interrupts is based on a backlog of unaccounted HPET clock periods
(new HPETTimer field 'ticks_not_accounted'). The backlog increases
due to delayed callbacks and coalesced interrupts, and it decreases
if an interrupt was injected successfully. If the backlog increases
while compensation is still in progress, the rate at which additional
interrupts are injected is increased too. A limit is imposed on the
backlog and on the rate.
Injecting additional timer interrupts to compensate lost interrupts
can alleviate long term time drift. However, on a short time scale,
this method can have the side effect of making virtual machine time
intermittently pass slower and faster than real time (depending on
the guest's time keeping algorithm). Compensation is disabled by
default and can be enabled for guests where this behaviour may be
acceptable.
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
---
hw/hpet.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/hw/hpet.c b/hw/hpet.c
index 35466ae..92d5f58 100644
--- a/hw/hpet.c
+++ b/hw/hpet.c
@@ -32,6 +32,7 @@
#include "sysbus.h"
#include "mc146818rtc.h"
#include "sysemu.h"
+#include <assert.h>
//#define HPET_DEBUG
#ifdef HPET_DEBUG
@@ -42,6 +43,9 @@
#define HPET_MSI_SUPPORT 0
+#define MAX_TICKS_NOT_ACCOUNTED (uint64_t)500000000 /* 5 sec */
+#define MAX_IRQ_RATE (uint32_t)10
+
struct HPETState;
typedef struct HPETTimer { /* timers */
uint8_t tn; /*timer number*/
@@ -326,28 +330,63 @@ static const VMStateDescription vmstate_hpet = {
}
};
+static bool hpet_timer_has_tick_backlog(HPETTimer *t)
+{
+ uint64_t backlog = t->ticks_not_accounted - (t->period + t->prev_period);
+ return (backlog >= t->period);
+}
+
/*
* timer expiration callback
*/
static void hpet_timer(void *opaque)
{
HPETTimer *t = opaque;
+ HPETState *s = t->state;
uint64_t diff;
-
+ int irq_delivered = 0;
+ uint32_t irq_count = 0;
uint64_t period = t->period;
uint64_t cur_tick = hpet_get_ticks(t->state);
+ if (s->driftfix && !t->ticks_not_accounted) {
+ t->ticks_not_accounted = t->prev_period = t->period;
+ }
if (timer_is_periodic(t) && period != 0) {
if (t->config & HPET_TN_32BIT) {
while (hpet_time_after(cur_tick, t->cmp)) {
t->cmp = (uint32_t)(t->cmp + t->period);
+ t->ticks_not_accounted += t->period;
+ irq_count++;
}
} else {
while (hpet_time_after64(cur_tick, t->cmp)) {
t->cmp += period;
+ t->ticks_not_accounted += period;
+ irq_count++;
}
}
diff = hpet_calculate_diff(t, cur_tick);
+ if (s->driftfix) {
+ if (t->ticks_not_accounted > MAX_TICKS_NOT_ACCOUNTED) {
+ t->ticks_not_accounted = t->period + t->prev_period;
+ }
+ if (hpet_timer_has_tick_backlog(t)) {
+ if (t->irq_rate == 1 || irq_count > 1) {
+ t->irq_rate++;
+ t->irq_rate = MIN(t->irq_rate, MAX_IRQ_RATE);
+ }
+ if (t->divisor == 0) {
+ assert(irq_count);
+ }
+ if (irq_count) {
+ t->divisor = t->irq_rate;
+ }
+ diff /= t->divisor--;
+ } else {
+ t->irq_rate = 1;
+ }
+ }
qemu_mod_timer(t->qemu_timer,
qemu_get_clock_ns(vm_clock) + (int64_t)ticks_to_ns(diff));
} else if (t->config & HPET_TN_32BIT && !timer_is_periodic(t)) {
@@ -358,7 +397,22 @@ static void hpet_timer(void *opaque)
t->wrap_flag = 0;
}
}
- update_irq(t, 1);
+ if (s->driftfix && timer_is_periodic(t) && period != 0) {
+ if (t->ticks_not_accounted >= t->period + t->prev_period) {
+ irq_delivered = update_irq(t, 1);
+ if (irq_delivered) {
+ t->ticks_not_accounted -= t->prev_period;
+ t->prev_period = t->period;
+ } else {
+ if (irq_count) {
+ t->irq_rate++;
+ t->irq_rate = MIN(t->irq_rate, MAX_IRQ_RATE);
+ }
+ }
+ }
+ } else {
+ update_irq(t, 1);
+ }
}
static void hpet_set_timer(HPETTimer *t)
@@ -697,6 +751,11 @@ static void hpet_reset(DeviceState *d)
timer->config |= 0x00000004ULL << 32;
timer->period = 0ULL;
timer->wrap_flag = 0;
+
+ timer->prev_period = 0;
+ timer->ticks_not_accounted = 0;
+ timer->irq_rate = 1;
+ timer->divisor = 1;
}
s->hpet_counter = 0ULL;
--
1.6.2.5
next prev parent reply other threads:[~2011-04-28 14:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-28 14:24 [Qemu-devel] [PATCH v3 0/5] hpet 'driftfix': alleviate time drift with HPET periodic timers Ulrich Obergfell
2011-04-28 14:24 ` [Qemu-devel] [PATCH v3 1/5] hpet 'driftfix': add hooks required to detect coalesced interrupts (x86 apic only) Ulrich Obergfell
2011-04-28 18:51 ` Blue Swirl
2011-04-28 22:50 ` Jan Kiszka
2011-04-29 9:45 ` Ulrich Obergfell
2011-04-29 10:15 ` Jan Kiszka
2011-04-29 21:44 ` Blue Swirl
2011-04-28 14:24 ` [Qemu-devel] [PATCH v3 2/5] hpet 'driftfix': add driftfix property to HPETState and DeviceInfo Ulrich Obergfell
2011-04-28 14:24 ` [Qemu-devel] [PATCH v3 3/5] hpet 'driftfix': add fields to HPETTimer and VMStateDescription Ulrich Obergfell
2011-04-28 14:24 ` [Qemu-devel] [PATCH v3 4/5] hpet 'driftfix': add code in update_irq() to detect coalesced interrupts (x86 apic only) Ulrich Obergfell
2011-04-28 14:25 ` Ulrich Obergfell [this message]
2011-05-03 19:03 ` [Qemu-devel] [PATCH v3 5/5] hpet 'driftfix': add code in hpet_timer() to compensate delayed callbacks and coalesced interrupts Marcelo Tosatti
2011-05-03 22:08 ` Glauber Costa
2011-05-03 22:55 ` Marcelo Tosatti
2011-05-04 8:06 ` Ulrich Obergfell
2011-05-04 9:09 ` Marcelo Tosatti
2011-05-04 13:36 ` Glauber Costa
2011-05-04 13:46 ` Gleb Natapov
2011-05-04 13:47 ` Glauber Costa
2011-05-04 13:55 ` Gleb Natapov
2011-05-05 8:07 ` Ulrich Obergfell
2011-05-06 14:39 ` Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304000700-3640-6-git-send-email-uobergfe@redhat.com \
--to=uobergfe@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=avi@redhat.com \
--cc=gcosta@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=kvm@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).