From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 03/21] scsi: introduce scsi_req_data
Date: Mon, 16 May 2011 14:16:19 +0200 [thread overview]
Message-ID: <1305548197-16196-4-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1305548197-16196-1-git-send-email-pbonzini@redhat.com>
This abstracts calling the command_complete callback, reducing churn
in the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-bus.c | 6 ++++++
hw/scsi-disk.c | 8 ++++----
hw/scsi-generic.c | 6 +++---
hw/scsi.h | 1 +
trace-events | 1 +
5 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 0fd85fc..0afe3fb 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -495,6 +495,12 @@ static const char *scsi_command_name(uint8_t cmd)
return names[cmd];
}
+void scsi_req_data(SCSIRequest *req, int len)
+{
+ trace_scsi_req_data(req->dev->id, req->lun, req->tag, len);
+ req->bus->complete(req->bus, SCSI_REASON_DATA, req->tag, len);
+}
+
void scsi_req_print(SCSIRequest *req)
{
FILE *fp = stderr;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index b05e654..2b5dc2a 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -167,7 +167,7 @@ static void scsi_read_complete(void * opaque, int ret)
n = r->iov.iov_len / 512;
r->sector += n;
r->sector_count -= n;
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
+ scsi_req_data(&r->req, r->iov.iov_len);
}
@@ -179,7 +179,7 @@ static void scsi_read_request(SCSIDiskReq *r)
if (r->sector_count == (uint32_t)-1) {
DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
r->sector_count = 0;
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
+ scsi_req_data(&r->req, r->iov.iov_len);
return;
}
DPRINTF("Read sector_count=%d\n", r->sector_count);
@@ -242,7 +242,7 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
vm_stop(VMSTOP_DISKFULL);
} else {
if (type == SCSI_REQ_STATUS_RETRY_READ) {
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, 0);
+ scsi_req_data(&r->req, 0);
}
scsi_command_complete(r, CHECK_CONDITION,
HARDWARE_ERROR);
@@ -278,7 +278,7 @@ static void scsi_write_complete(void * opaque, int ret)
}
r->iov.iov_len = len;
DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, len);
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, len);
+ scsi_req_data(&r->req, len);
}
}
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 102f1da..e4f1f30 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -175,7 +175,7 @@ static void scsi_read_complete(void * opaque, int ret)
if (len == 0) {
scsi_command_complete(r, 0);
} else {
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, len);
+ scsi_req_data(&r->req, len);
}
}
@@ -212,7 +212,7 @@ static void scsi_read_data(SCSIDevice *d, uint32_t tag)
DPRINTF("Sense: %d %d %d %d %d %d %d %d\n",
r->buf[0], r->buf[1], r->buf[2], r->buf[3],
r->buf[4], r->buf[5], r->buf[6], r->buf[7]);
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, s->senselen);
+ scsi_req_data(&r->req, s->senselen);
return;
}
@@ -263,7 +263,7 @@ static int scsi_write_data(SCSIDevice *d, uint32_t tag)
if (r->len == 0) {
r->len = r->buflen;
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->len);
+ scsi_req_data(&r->req, r->len);
return 0;
}
diff --git a/hw/scsi.h b/hw/scsi.h
index d3b5d56..7c09f32 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -105,6 +105,7 @@ void scsi_req_free(SCSIRequest *req);
int scsi_req_parse(SCSIRequest *req, uint8_t *buf);
void scsi_req_print(SCSIRequest *req);
+void scsi_req_data(SCSIRequest *req, int len);
void scsi_req_complete(SCSIRequest *req);
#endif
diff --git a/trace-events b/trace-events
index 55f89b4..98e7b2d 100644
--- a/trace-events
+++ b/trace-events
@@ -207,6 +207,7 @@ disable usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature
# hw/scsi-bus.c
disable scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
+disable scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
disable scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
disable scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer, uint64_t lba) "target %d lun %d tag %d command %d dir %d length %d lba %"PRIu64""
disable scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d"
--
1.7.4.4
next prev parent reply other threads:[~2011-05-16 12:16 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-16 12:16 [Qemu-devel] [PATCH v2 00/21] SCSI subsystem improvements Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 01/21] scsi: add tracing of scsi requests Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 02/21] scsi-generic: Remove bogus double complete Paolo Bonzini
2011-05-16 12:16 ` Paolo Bonzini [this message]
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 04/21] scsi: introduce SCSIBusOps Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 05/21] scsi: reference-count requests Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 06/21] lsi: extract lsi_find_by_tag Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 07/21] scsi: Use 'SCSIRequest' directly Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 08/21] scsi: commonize purging requests Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 09/21] scsi: introduce scsi_req_abort Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 10/21] scsi: introduce scsi_req_cancel Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 11/21] scsi: use scsi_req_complete Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 12/21] scsi: Update sense code handling Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 13/21] scsi: do not call send_command directly Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 14/21] scsi: introduce scsi_req_new Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 15/21] scsi: introduce scsi_req_kick Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 16/21] scsi: introduce scsi_req_get_buf Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 17/21] scsi: Implement 'get_sense' callback Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 18/21] scsi-disk: add data direction checking Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 19/21] scsi: make write_data return void Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 20/21] scsi-generic: Handle queue full Paolo Bonzini
2011-05-16 12:16 ` [Qemu-devel] [PATCH v2 21/21] scsi: split command_complete callback in two Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305548197-16196-4-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).