From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v3 05/21] scsi: reference-count requests
Date: Tue, 17 May 2011 13:00:51 +0200 [thread overview]
Message-ID: <1305630067-2119-6-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1305630067-2119-1-git-send-email-pbonzini@redhat.com>
With the next patch, a device may hold SCSIRequest for an indefinite
time. Split a rather big patch, and protect against access errors,
by reference counting them. One such access error in fact exists (it
is visible by testing the lsi driver with MALLOC_PERTURB_), and this
patch provides the infrastructure to fix it later.
There is some ugliness in scsi_send_command implementation due to
the need to unref the request when it fails. This will go away
with the next patches, which move the unref'ing to the devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/scsi-bus.c | 22 ++++++++++++++++++++--
hw/scsi-disk.c | 20 +++++++++++++-------
hw/scsi-generic.c | 23 ++++++++++++++++-------
hw/scsi.h | 5 +++++
4 files changed, 54 insertions(+), 16 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 63d9a68..c0bc275 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -136,6 +136,7 @@ SCSIRequest *scsi_req_alloc(size_t size, SCSIDevice *d, uint32_t tag, uint32_t l
SCSIRequest *req;
req = qemu_mallocz(size);
+ req->refcount = 2;
req->bus = scsi_bus_from_device(d);
req->dev = d;
req->tag = tag;
@@ -159,21 +160,23 @@ SCSIRequest *scsi_req_find(SCSIDevice *d, uint32_t tag)
return NULL;
}
-static void scsi_req_dequeue(SCSIRequest *req)
+void scsi_req_dequeue(SCSIRequest *req)
{
trace_scsi_req_dequeue(req->dev->id, req->lun, req->tag);
if (req->enqueued) {
QTAILQ_REMOVE(&req->dev->requests, req, next);
req->enqueued = false;
+ scsi_req_unref(req);
}
}
void scsi_req_free(SCSIRequest *req)
{
- scsi_req_dequeue(req);
+ assert(req->refcount == 0);
qemu_free(req);
}
+
static int scsi_req_length(SCSIRequest *req, uint8_t *cmd)
{
switch (cmd[0] >> 5) {
@@ -495,6 +498,19 @@ static const char *scsi_command_name(uint8_t cmd)
return names[cmd];
}
+SCSIRequest *scsi_req_ref(SCSIRequest *req)
+{
+ req->refcount++;
+ return req;
+}
+
+void scsi_req_unref(SCSIRequest *req)
+{
+ if (--req->refcount == 0) {
+ req->dev->info->free_req(req);
+ }
+}
+
void scsi_req_data(SCSIRequest *req, int len)
{
trace_scsi_req_data(req->dev->id, req->lun, req->tag, len);
@@ -532,10 +548,12 @@ void scsi_req_print(SCSIRequest *req)
void scsi_req_complete(SCSIRequest *req)
{
assert(req->status != -1);
+ scsi_req_ref(req);
scsi_req_dequeue(req);
req->bus->ops.complete(req->bus, SCSI_REASON_DONE,
req->tag,
req->status);
+ scsi_req_unref(req);
}
static char *scsibus_get_fw_dev_path(DeviceState *dev)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 2b5dc2a..ba7ffa1 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -95,8 +95,10 @@ static SCSIDiskReq *scsi_new_request(SCSIDiskState *s, uint32_t tag,
return r;
}
-static void scsi_remove_request(SCSIDiskReq *r)
+static void scsi_free_request(SCSIRequest *req)
{
+ SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
+
qemu_vfree(r->iov.iov_base);
scsi_req_free(&r->req);
}
@@ -131,7 +133,6 @@ static void scsi_command_complete(SCSIDiskReq *r, int status, int sense)
r->req.tag, status, sense);
scsi_req_set_status(r, status, sense);
scsi_req_complete(&r->req);
- scsi_remove_request(r);
}
/* Cancel a pending data transfer. */
@@ -145,7 +146,7 @@ static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
if (r->req.aiocb)
bdrv_aio_cancel(r->req.aiocb);
r->req.aiocb = NULL;
- scsi_remove_request(r);
+ scsi_req_dequeue(&r->req);
}
}
@@ -1030,7 +1031,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
uint8_t *buf, int lun)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
- uint32_t len;
+ int32_t len;
int is_write;
uint8_t command;
uint8_t *outbuf;
@@ -1092,6 +1093,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
case REZERO_UNIT:
rc = scsi_disk_emulate_command(r, outbuf);
if (rc < 0) {
+ scsi_req_unref(&r->req);
return 0;
}
@@ -1178,9 +1180,11 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
fail:
scsi_command_complete(r, CHECK_CONDITION, ILLEGAL_REQUEST);
+ scsi_req_unref(&r->req);
return 0;
illegal_lba:
scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
+ scsi_req_unref(&r->req);
return 0;
}
if (r->sector_count == 0 && r->iov.iov_len == 0) {
@@ -1188,12 +1192,13 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
}
len = r->sector_count * 512 + r->iov.iov_len;
if (is_write) {
- return -len;
+ len = -len;
} else {
if (!r->sector_count)
r->sector_count = -1;
- return len;
}
+ scsi_req_unref(&r->req);
+ return len;
}
static void scsi_disk_purge_requests(SCSIDiskState *s)
@@ -1205,7 +1210,7 @@ static void scsi_disk_purge_requests(SCSIDiskState *s)
if (r->req.aiocb) {
bdrv_aio_cancel(r->req.aiocb);
}
- scsi_remove_request(r);
+ scsi_req_dequeue(&r->req);
}
}
@@ -1288,6 +1293,7 @@ static SCSIDeviceInfo scsi_disk_info = {
.qdev.reset = scsi_disk_reset,
.init = scsi_disk_initfn,
.destroy = scsi_destroy,
+ .free_req = scsi_free_request,
.send_command = scsi_send_command,
.read_data = scsi_read_data,
.write_data = scsi_write_data,
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 3db734a..5739067 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -74,8 +74,10 @@ static SCSIGenericReq *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lu
return DO_UPCAST(SCSIGenericReq, req, req);
}
-static void scsi_remove_request(SCSIGenericReq *r)
+static void scsi_free_request(SCSIRequest *req)
{
+ SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
+
qemu_free(r->buf);
scsi_req_free(&r->req);
}
@@ -112,7 +114,6 @@ static void scsi_command_complete(void *opaque, int ret)
r, r->req.tag, r->req.status);
scsi_req_complete(&r->req);
- scsi_remove_request(r);
}
/* Cancel a pending data transfer. */
@@ -127,7 +128,7 @@ static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
if (r->req.aiocb)
bdrv_aio_cancel(r->req.aiocb);
r->req.aiocb = NULL;
- scsi_remove_request(r);
+ scsi_req_dequeue(&r->req);
}
}
@@ -320,6 +321,7 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
SCSIGenericReq *r;
SCSIBus *bus;
int ret;
+ int32_t len;
if (cmd[0] != REQUEST_SENSE &&
(lun != s->lun || (cmd[1] >> 5) != s->lun)) {
@@ -348,7 +350,8 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
if (-1 == scsi_req_parse(&r->req, cmd)) {
BADF("Unsupported command length, command %x\n", cmd[0]);
- scsi_remove_request(r);
+ scsi_req_dequeue(&r->req);
+ scsi_req_unref(&r->req);
return 0;
}
scsi_req_fixup(&r->req);
@@ -374,8 +377,10 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
ret = execute_command(s->bs, r, SG_DXFER_NONE, scsi_command_complete);
if (ret == -1) {
scsi_command_complete(r, -EINVAL);
+ scsi_req_unref(&r->req);
return 0;
}
+ scsi_req_unref(&r->req);
return 0;
}
@@ -390,10 +395,13 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
r->len = r->req.cmd.xfer;
if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
r->len = 0;
- return -r->req.cmd.xfer;
+ len = -r->req.cmd.xfer;
+ } else {
+ len = r->req.cmd.xfer;
}
- return r->req.cmd.xfer;
+ scsi_req_unref(&r->req);
+ return len;
}
static int get_blocksize(BlockDriverState *bdrv)
@@ -466,7 +474,7 @@ static void scsi_generic_purge_requests(SCSIGenericState *s)
if (r->req.aiocb) {
bdrv_aio_cancel(r->req.aiocb);
}
- scsi_remove_request(r);
+ scsi_req_dequeue(&r->req);
}
}
@@ -558,6 +566,7 @@ static SCSIDeviceInfo scsi_generic_info = {
.qdev.reset = scsi_generic_reset,
.init = scsi_generic_initfn,
.destroy = scsi_destroy,
+ .free_req = scsi_free_request,
.send_command = scsi_send_command,
.read_data = scsi_read_data,
.write_data = scsi_write_data,
diff --git a/hw/scsi.h b/hw/scsi.h
index d1753f9..ecf1aeb 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -29,6 +29,7 @@ enum SCSIXferMode {
typedef struct SCSIRequest {
SCSIBus *bus;
SCSIDevice *dev;
+ uint32_t refcount;
uint32_t tag;
uint32_t lun;
uint32_t status;
@@ -65,6 +66,7 @@ struct SCSIDeviceInfo {
DeviceInfo qdev;
scsi_qdev_initfn init;
void (*destroy)(SCSIDevice *s);
+ void (*free_req)(SCSIRequest *req);
int32_t (*send_command)(SCSIDevice *s, uint32_t tag, uint8_t *buf,
int lun);
void (*read_data)(SCSIDevice *s, uint32_t tag);
@@ -103,6 +105,9 @@ int scsi_bus_legacy_handle_cmdline(SCSIBus *bus);
SCSIRequest *scsi_req_alloc(size_t size, SCSIDevice *d, uint32_t tag, uint32_t lun);
SCSIRequest *scsi_req_find(SCSIDevice *d, uint32_t tag);
void scsi_req_free(SCSIRequest *req);
+void scsi_req_dequeue(SCSIRequest *req);
+SCSIRequest *scsi_req_ref(SCSIRequest *req);
+void scsi_req_unref(SCSIRequest *req);
int scsi_req_parse(SCSIRequest *req, uint8_t *buf);
void scsi_req_print(SCSIRequest *req);
--
1.7.4.4
next prev parent reply other threads:[~2011-05-17 11:03 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-17 11:00 [Qemu-devel] [PATCH v3 00/21] SCSI subsystem improvements Paolo Bonzini
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 01/21] scsi: add tracing of scsi requests Paolo Bonzini
2011-05-20 15:49 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 02/21] scsi-generic: Remove bogus double complete Paolo Bonzini
2011-05-20 15:50 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 03/21] scsi: introduce scsi_req_data Paolo Bonzini
2011-05-20 15:52 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 04/21] scsi: introduce SCSIBusOps Paolo Bonzini
2011-05-20 15:53 ` Christoph Hellwig
2011-05-20 17:46 ` Paolo Bonzini
2011-05-17 11:00 ` Paolo Bonzini [this message]
2011-05-20 15:58 ` [Qemu-devel] [PATCH v3 05/21] scsi: reference-count requests Christoph Hellwig
2011-05-20 17:48 ` Paolo Bonzini
2011-05-20 18:03 ` Paolo Bonzini
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 06/21] lsi: extract lsi_find_by_tag Paolo Bonzini
2011-05-20 15:58 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 07/21] scsi: Use 'SCSIRequest' directly Paolo Bonzini
2011-05-20 15:59 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 08/21] scsi: commonize purging requests Paolo Bonzini
2011-05-20 16:00 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 09/21] scsi: introduce scsi_req_abort Paolo Bonzini
2011-05-20 16:00 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 10/21] scsi: introduce scsi_req_cancel Paolo Bonzini
2011-05-20 16:01 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 11/21] scsi: use scsi_req_complete Paolo Bonzini
2011-05-20 16:01 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 12/21] scsi: Update sense code handling Paolo Bonzini
2011-05-20 16:02 ` Christoph Hellwig
2011-05-17 11:00 ` [Qemu-devel] [PATCH v3 13/21] scsi: do not call send_command directly Paolo Bonzini
2011-05-20 16:04 ` Christoph Hellwig
2011-05-20 17:43 ` Paolo Bonzini
2011-05-24 13:05 ` Kevin Wolf
2011-05-24 13:13 ` Paolo Bonzini
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 14/21] scsi: introduce scsi_req_new Paolo Bonzini
2011-05-20 16:04 ` Christoph Hellwig
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 15/21] scsi: introduce scsi_req_kick Paolo Bonzini
2011-05-20 16:05 ` Christoph Hellwig
2011-05-20 17:55 ` Paolo Bonzini
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 16/21] scsi: introduce scsi_req_get_buf Paolo Bonzini
2011-05-20 16:06 ` Christoph Hellwig
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 17/21] scsi: Implement 'get_sense' callback Paolo Bonzini
2011-05-20 16:06 ` Christoph Hellwig
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 18/21] scsi-disk: add data direction checking Paolo Bonzini
2011-05-20 16:07 ` Christoph Hellwig
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 19/21] scsi: make write_data return void Paolo Bonzini
2011-05-20 16:08 ` Christoph Hellwig
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 20/21] scsi-generic: Handle queue full Paolo Bonzini
2011-05-20 16:09 ` Christoph Hellwig
2011-05-17 11:01 ` [Qemu-devel] [PATCH v3 21/21] scsi: split command_complete callback in two Paolo Bonzini
2011-05-20 16:11 ` Christoph Hellwig
2011-05-20 17:44 ` Paolo Bonzini
2011-05-19 20:30 ` [Qemu-devel] [PATCH v3 00/21] SCSI subsystem improvements Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305630067-2119-6-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).