From: Max Filippov <jcmvbkbc@gmail.com>
To: qemu-devel@nongnu.org
Cc: Max Filippov <jcmvbkbc@gmail.com>
Subject: [Qemu-devel] [PATCH 26/26] target-xtensa: implement relocatable vectors
Date: Wed, 18 May 2011 02:32:52 +0400 [thread overview]
Message-ID: <1305671572-5899-27-git-send-email-jcmvbkbc@gmail.com> (raw)
In-Reply-To: <1305671572-5899-1-git-send-email-jcmvbkbc@gmail.com>
See ISA, 4.4.3 for details.
Vector addresses recorded in core configuration are absolute values that
correspond to default VECBASE value.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
---
target-xtensa/cpu.h | 2 ++
target-xtensa/helper.c | 18 ++++++++++++++++--
target-xtensa/translate.c | 1 +
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/target-xtensa/cpu.h b/target-xtensa/cpu.h
index de3408f..d1d5b2b 100644
--- a/target-xtensa/cpu.h
+++ b/target-xtensa/cpu.h
@@ -123,6 +123,7 @@ enum {
INTCLEAR = 227,
INTENABLE = 228,
PS = 230,
+ VECBASE = 231,
EXCCAUSE = 232,
CCOUNT = 234,
PRID = 235,
@@ -218,6 +219,7 @@ typedef struct XtensaConfig {
unsigned nareg;
int excm_level;
int ndepc;
+ uint32_t vecbase;
uint32_t exception_vector[EXC_MAX];
unsigned ninterrupt;
unsigned nlevel;
diff --git a/target-xtensa/helper.c b/target-xtensa/helper.c
index 4c3069f..28d36ae 100644
--- a/target-xtensa/helper.c
+++ b/target-xtensa/helper.c
@@ -40,6 +40,7 @@ void cpu_reset(CPUXtensaState *env)
env->pc = env->config->exception_vector[EXC_RESET];
env->sregs[LITBASE] &= ~1;
env->sregs[PS] = 0x1f;
+ env->sregs[VECBASE] = env->config->vecbase;
env->pending_irq_level = 0;
}
@@ -51,6 +52,7 @@ static const XtensaConfig core_config[] = {
.nareg = 64,
.ndepc = 1,
.excm_level = 16,
+ .vecbase = 0x5fff8400,
.exception_vector = {
[EXC_RESET] = 0x5fff8000,
[EXC_WINDOW_OVERFLOW4] = 0x5fff8400,
@@ -137,6 +139,16 @@ target_phys_addr_t cpu_get_phys_page_debug(CPUState *env, target_ulong addr)
return addr;
}
+static uint32_t relocated_vector(CPUState *env, uint32_t vector)
+{
+ if (xtensa_option_enabled(env->config,
+ XTENSA_OPTION_RELOCATABLE_VECTOR)) {
+ return vector - env->config->vecbase + env->sregs[VECBASE];
+ } else {
+ return vector;
+ }
+}
+
static int handle_interrupt(CPUState *env)
{
int handled = 1;
@@ -150,7 +162,8 @@ static int handle_interrupt(CPUState *env)
if (level > 1) {
env->sregs[EPC1 + level - 1] = env->pc;
env->sregs[EPS2 + level - 2] = env->sregs[PS];
- env->pc = env->config->interrupt_vector[level];
+ env->pc = relocated_vector(env,
+ env->config->interrupt_vector[level]);
} else {
handled = 0;
env->sregs[EXCCAUSE] = LEVEL1_INTERRUPT_CAUSE;
@@ -196,7 +209,8 @@ void do_interrupt(CPUState *env)
case EXC_USER:
case EXC_DOUBLE:
if (env->config->exception_vector[env->exception_index]) {
- env->pc = env->config->exception_vector[env->exception_index];
+ env->pc = relocated_vector(env,
+ env->config->exception_vector[env->exception_index]);
env->exception_taken = 1;
env->interrupt_request |= CPU_INTERRUPT_EXITTB;
} else {
diff --git a/target-xtensa/translate.c b/target-xtensa/translate.c
index 8d25bde..8efe609 100644
--- a/target-xtensa/translate.c
+++ b/target-xtensa/translate.c
@@ -104,6 +104,7 @@ static const char * const sregnames[256] = {
[INTCLEAR] = "INTCLEAR",
[INTENABLE] = "INTENABLE",
[PS] = "PS",
+ [VECBASE] = "VECBASE",
[EXCCAUSE] = "EXCCAUSE",
[CCOUNT] = "CCOUNT",
[PRID] = "PRID",
--
1.7.3.4
prev parent reply other threads:[~2011-05-17 22:34 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-17 22:32 [Qemu-devel] [PATCH 00/26] target-xtensa: introduce new target architecture Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 01/26] target-xtensa: add target stubs Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 02/26] target-xtensa: add target to the configure script Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 03/26] target-xtensa: implement disas_xtensa_insn Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 04/26] target-xtensa: implement narrow instructions Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 05/26] target-xtensa: implement RT0 group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 06/26] target-xtensa: add sample board Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 07/26] target-xtensa: implement conditional jumps Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 08/26] target-xtensa: implement JX/RET0/CALLX Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 09/26] target-xtensa: add special and user registers Max Filippov
2011-05-19 20:59 ` Richard Henderson
2011-05-20 7:34 ` Max Filippov
2011-05-20 14:18 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 10/26] target-xtensa: implement RST3 group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 11/26] target-xtensa: implement shifts (ST1 and RST1 groups) Max Filippov
2011-05-19 21:15 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 12/26] target-xtensa: implement LSAI group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 13/26] target-xtensa: mark reserved and TBD opcodes Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 14/26] target-xtensa: implement SYNC group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 15/26] target-xtensa: implement CACHE group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 16/26] target-xtensa: implement exceptions Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 17/26] target-xtensa: implement RST2 group (32 bit mul/div/rem) Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 18/26] target-xtensa: implement windowed registers Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 19/26] target-xtensa: implement loop option Max Filippov
2011-05-19 21:51 ` Richard Henderson
2011-05-20 7:25 ` Max Filippov
2011-05-20 9:10 ` Max Filippov
2011-05-20 14:14 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 20/26] target-xtensa: implement extended L32R Max Filippov
2011-05-19 22:00 ` Richard Henderson
2011-05-20 7:14 ` Max Filippov
2011-05-20 15:30 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 21/26] target-xtensa: implement unaligned exception option Max Filippov
2011-05-19 22:04 ` Richard Henderson
2011-05-22 12:10 ` Max Filippov
2011-05-22 16:57 ` Richard Henderson
2011-05-22 20:12 ` Max Filippov
2011-05-23 13:51 ` Richard Henderson
2011-05-23 23:20 ` Max Filippov
2011-05-24 14:57 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 22/26] target-xtensa: implement SIMCALL Max Filippov
2011-05-19 22:07 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 23/26] target-xtensa: implement interrupt option Max Filippov
2011-05-20 15:44 ` Richard Henderson
2011-05-20 20:05 ` Max Filippov
2011-05-20 20:49 ` Richard Henderson
2011-05-20 21:30 ` Max Filippov
2011-05-20 22:19 ` Richard Henderson
2011-05-24 10:28 ` Max Filippov
2011-05-24 14:59 ` Richard Henderson
2011-05-24 15:11 ` Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 24/26] target-xtensa: implement accurate window check Max Filippov
2011-05-20 15:58 ` Richard Henderson
2011-05-20 19:04 ` Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 25/26] target-xtensa: implement CPENABLE and PRID SRs Max Filippov
2011-05-17 22:32 ` Max Filippov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305671572-5899-27-git-send-email-jcmvbkbc@gmail.com \
--to=jcmvbkbc@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).