From: Max Filippov <jcmvbkbc@gmail.com>
To: qemu-devel@nongnu.org
Cc: Max Filippov <jcmvbkbc@gmail.com>
Subject: [Qemu-devel] [PATCH 06/26] target-xtensa: add sample board
Date: Wed, 18 May 2011 02:32:32 +0400 [thread overview]
Message-ID: <1305671572-5899-7-git-send-email-jcmvbkbc@gmail.com> (raw)
In-Reply-To: <1305671572-5899-1-git-send-email-jcmvbkbc@gmail.com>
Sample board and sample CPU core are used for debug and may be used for
development of custom SoC emulators.
This board has two fixed size memory regions for DTCM and ITCM and
variable length SRAM region.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
---
Makefile.target | 1 +
hw/xtensa_sample.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 100 insertions(+), 0 deletions(-)
create mode 100644 hw/xtensa_sample.c
diff --git a/Makefile.target b/Makefile.target
index 2b056d1..ca0db72 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -379,6 +379,7 @@ obj-s390x-y = s390-virtio-bus.o s390-virtio.o
obj-alpha-y = alpha_palcode.o
obj-xtensa-y += xtensa_pic.o
+obj-xtensa-y += xtensa_sample.o
main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
diff --git a/hw/xtensa_sample.c b/hw/xtensa_sample.c
new file mode 100644
index 0000000..b818fed
--- /dev/null
+++ b/hw/xtensa_sample.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2011, Max Filippov, Open Source and Linux Lab.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the Open Source and Linux Lab nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "sysemu.h"
+#include "boards.h"
+#include "loader.h"
+#include "elf.h"
+
+static void xtensa_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename, const char *kernel_cmdline,
+ const char *initrd_filename, const char *cpu_model)
+{
+ CPUState *env = NULL;
+ ram_addr_t ram_offset;
+ int n;
+
+ for (n = 0; n < smp_cpus; n++) {
+ env = cpu_init(cpu_model);
+ if (!env) {
+ fprintf(stderr, "Unable to find CPU definition\n");
+ exit(1);
+ }
+ }
+
+ ram_offset = qemu_ram_alloc(NULL, "xtensa.dram", 0x10000);
+ cpu_register_physical_memory(0x5ffd0000, 0x10000, ram_offset);
+
+ ram_offset = qemu_ram_alloc(NULL, "xtensa.iram", 0x20000);
+ cpu_register_physical_memory(0x5ffe0000, 0x20000, ram_offset);
+
+ ram_offset = qemu_ram_alloc(NULL, "xtensa.sram", ram_size);
+ cpu_register_physical_memory(0x60000000, ram_size, ram_offset);
+
+ if (kernel_filename) {
+ uint64_t elf_entry;
+ uint64_t elf_lowaddr;
+#ifdef TARGET_WORDS_BIGENDIAN
+ int success = load_elf(kernel_filename, NULL, NULL, &elf_entry,
+ &elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
+#else
+ int success = load_elf(kernel_filename, NULL, NULL, &elf_entry,
+ &elf_lowaddr, NULL, 0, ELF_MACHINE, 0);
+#endif
+ if (success > 0) {
+ env->pc = elf_entry;
+ }
+ }
+}
+
+static void xtensa_sample_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename, const char *kernel_cmdline,
+ const char *initrd_filename, const char *cpu_model)
+{
+ if (!cpu_model) {
+ cpu_model = "sample-xtensa-core";
+ }
+ xtensa_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model);
+}
+
+static QEMUMachine xtensa_sample_machine = {
+ .name = "sample-xtensa-machine",
+ .desc = "Sample Xtensa machine (sample Xtensa core)",
+ .init = xtensa_sample_init,
+ .max_cpus = 4,
+};
+
+static void xtensa_sample_machine_init(void)
+{
+ qemu_register_machine(&xtensa_sample_machine);
+}
+
+machine_init(xtensa_sample_machine_init);
--
1.7.3.4
next prev parent reply other threads:[~2011-05-17 22:33 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-17 22:32 [Qemu-devel] [PATCH 00/26] target-xtensa: introduce new target architecture Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 01/26] target-xtensa: add target stubs Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 02/26] target-xtensa: add target to the configure script Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 03/26] target-xtensa: implement disas_xtensa_insn Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 04/26] target-xtensa: implement narrow instructions Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 05/26] target-xtensa: implement RT0 group Max Filippov
2011-05-17 22:32 ` Max Filippov [this message]
2011-05-17 22:32 ` [Qemu-devel] [PATCH 07/26] target-xtensa: implement conditional jumps Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 08/26] target-xtensa: implement JX/RET0/CALLX Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 09/26] target-xtensa: add special and user registers Max Filippov
2011-05-19 20:59 ` Richard Henderson
2011-05-20 7:34 ` Max Filippov
2011-05-20 14:18 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 10/26] target-xtensa: implement RST3 group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 11/26] target-xtensa: implement shifts (ST1 and RST1 groups) Max Filippov
2011-05-19 21:15 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 12/26] target-xtensa: implement LSAI group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 13/26] target-xtensa: mark reserved and TBD opcodes Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 14/26] target-xtensa: implement SYNC group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 15/26] target-xtensa: implement CACHE group Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 16/26] target-xtensa: implement exceptions Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 17/26] target-xtensa: implement RST2 group (32 bit mul/div/rem) Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 18/26] target-xtensa: implement windowed registers Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 19/26] target-xtensa: implement loop option Max Filippov
2011-05-19 21:51 ` Richard Henderson
2011-05-20 7:25 ` Max Filippov
2011-05-20 9:10 ` Max Filippov
2011-05-20 14:14 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 20/26] target-xtensa: implement extended L32R Max Filippov
2011-05-19 22:00 ` Richard Henderson
2011-05-20 7:14 ` Max Filippov
2011-05-20 15:30 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 21/26] target-xtensa: implement unaligned exception option Max Filippov
2011-05-19 22:04 ` Richard Henderson
2011-05-22 12:10 ` Max Filippov
2011-05-22 16:57 ` Richard Henderson
2011-05-22 20:12 ` Max Filippov
2011-05-23 13:51 ` Richard Henderson
2011-05-23 23:20 ` Max Filippov
2011-05-24 14:57 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 22/26] target-xtensa: implement SIMCALL Max Filippov
2011-05-19 22:07 ` Richard Henderson
2011-05-17 22:32 ` [Qemu-devel] [PATCH 23/26] target-xtensa: implement interrupt option Max Filippov
2011-05-20 15:44 ` Richard Henderson
2011-05-20 20:05 ` Max Filippov
2011-05-20 20:49 ` Richard Henderson
2011-05-20 21:30 ` Max Filippov
2011-05-20 22:19 ` Richard Henderson
2011-05-24 10:28 ` Max Filippov
2011-05-24 14:59 ` Richard Henderson
2011-05-24 15:11 ` Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 24/26] target-xtensa: implement accurate window check Max Filippov
2011-05-20 15:58 ` Richard Henderson
2011-05-20 19:04 ` Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 25/26] target-xtensa: implement CPENABLE and PRID SRs Max Filippov
2011-05-17 22:32 ` [Qemu-devel] [PATCH 26/26] target-xtensa: implement relocatable vectors Max Filippov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305671572-5899-7-git-send-email-jcmvbkbc@gmail.com \
--to=jcmvbkbc@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).