From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Hannes Reinecke <hare@suse.de>
Subject: [Qemu-devel] [PATCH v5 19/25] scsi-disk: add data direction checking
Date: Thu, 26 May 2011 12:56:45 +0200 [thread overview]
Message-ID: <1306407411-4290-20-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1306407411-4290-1-git-send-email-pbonzini@redhat.com>
From: Hannes Reinecke <hare@suse.de>
scsi_req_parse() already provides for a data direction setting,
so we should be using it to check for correct direction.
And we should return the sense code 'INVALID FIELD IN CDB'
in these cases.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
hw/scsi-disk.c | 35 ++++++++++++++++++++++++-----------
1 files changed, 24 insertions(+), 11 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 9567c7c..f3eba52 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -51,8 +51,6 @@ typedef struct SCSIDiskState SCSIDiskState;
typedef struct SCSIDiskReq {
SCSIRequest req;
- /* ??? We should probably keep track of whether the data transfer is
- a read or a write. Currently we rely on the host getting it right. */
/* Both sector and sector_count are in terms of qemu 512 byte blocks. */
uint64_t sector;
uint32_t sector_count;
@@ -180,6 +178,12 @@ static void scsi_read_data(SCSIRequest *req)
/* No data transfer may already be in progress */
assert(r->req.aiocb == NULL);
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ DPRINTF("Data transfer direction invalid\n");
+ scsi_read_complete(r, -EINVAL);
+ return;
+ }
+
n = r->sector_count;
if (n > SCSI_DMA_BUF_SIZE / 512)
n = SCSI_DMA_BUF_SIZE / 512;
@@ -216,16 +220,22 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
if (type == SCSI_REQ_STATUS_RETRY_READ) {
scsi_req_data(&r->req, 0);
}
- if (error == ENOMEM) {
+ switch (error) {
+ case ENOMEM:
scsi_command_complete(r, CHECK_CONDITION,
SENSE_CODE(TARGET_FAILURE));
- } else {
+ break;
+ case EINVAL:
+ scsi_command_complete(r, CHECK_CONDITION,
+ SENSE_CODE(INVALID_FIELD));
+ break;
+ default:
scsi_command_complete(r, CHECK_CONDITION,
SENSE_CODE(IO_ERROR));
+ break;
}
bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
}
-
return 1;
}
@@ -268,6 +278,12 @@ static int scsi_write_data(SCSIRequest *req)
/* No data transfer may already be in progress */
assert(r->req.aiocb == NULL);
+ if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
+ DPRINTF("Data transfer direction invalid\n");
+ scsi_write_complete(r, -EINVAL);
+ return 0;
+ }
+
n = r->iov.iov_len / 512;
if (n) {
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
@@ -987,14 +1003,12 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
int32_t len;
- int is_write;
uint8_t command;
uint8_t *outbuf;
int rc;
command = buf[0];
outbuf = (uint8_t *)r->iov.iov_base;
- is_write = 0;
DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
if (scsi_req_parse(&r->req, buf) != 0) {
@@ -1074,7 +1088,6 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
goto illegal_lba;
r->sector = r->req.cmd.lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
- is_write = 1;
break;
case MODE_SELECT:
DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
@@ -1140,13 +1153,13 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
scsi_command_complete(r, GOOD, SENSE_CODE(NO_SENSE));
}
len = r->sector_count * 512 + r->iov.iov_len;
- if (is_write) {
- len = -len;
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ return -len;
} else {
if (!r->sector_count)
r->sector_count = -1;
+ return len;
}
- return len;
}
static void scsi_disk_reset(DeviceState *dev)
--
1.7.4.4
next prev parent reply other threads:[~2011-05-26 10:57 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-26 10:56 [Qemu-devel] [PULL v5 00/25] SCSI subsystem improvements Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 01/25] scsi: add tracing of scsi requests Paolo Bonzini
2011-05-26 20:20 ` Blue Swirl
2011-05-27 8:32 ` Stefan Hajnoczi
2011-05-27 12:43 ` Paolo Bonzini
2011-05-27 12:51 ` [Qemu-devel] [PATCH v6 " Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 02/25] scsi-generic: Remove bogus double complete Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 03/25] scsi: introduce scsi_req_data Paolo Bonzini
2011-05-27 12:51 ` [Qemu-devel] [PATCH v6 " Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 04/25] scsi: introduce SCSIBusOps Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 05/25] scsi-generic: do not use a stale aiocb Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 06/25] scsi: reference-count requests Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 07/25] lsi: extract lsi_find_by_tag Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 08/25] scsi: Use 'SCSIRequest' directly Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 09/25] scsi: commonize purging requests Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 10/25] scsi: introduce scsi_req_abort Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 11/25] scsi: introduce scsi_req_cancel Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 12/25] scsi: use scsi_req_complete Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 13/25] scsi: Update sense code handling Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 14/25] scsi: do not call send_command directly Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 15/25] scsi: introduce scsi_req_new Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 16/25] scsi: introduce scsi_req_continue Paolo Bonzini
2011-05-27 12:51 ` [Qemu-devel] [PATCH v6 " Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 17/25] scsi: introduce scsi_req_get_buf Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 18/25] scsi: Implement 'get_sense' callback Paolo Bonzini
2011-05-26 10:56 ` Paolo Bonzini [this message]
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 20/25] scsi: make write_data return void Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 21/25] scsi-generic: Handle queue full Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 22/25] esp: rename sense to status Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 23/25] scsi: split command_complete callback in two Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 24/25] scsi: rename arguments to the new callbacks Paolo Bonzini
2011-05-26 10:56 ` [Qemu-devel] [PATCH v5 25/25] scsi: ignore LUN field in the CDB Paolo Bonzini
2011-05-31 13:38 ` [Qemu-devel] [PULL v5 00/25] SCSI subsystem improvements Anthony Liguori
2011-06-02 14:54 ` Andreas Färber
2011-06-03 6:58 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306407411-4290-20-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=hare@suse.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).