qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [RFC PATCH v2 06/13] scsi-generic: fix passthrough of devices with LUN != 0
Date: Mon,  6 Jun 2011 18:04:15 +0200	[thread overview]
Message-ID: <1307376262-1255-7-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1307376262-1255-1-git-send-email-pbonzini@redhat.com>

This allows redirecting them to LUN0 in the emulated target and, after
the scsi-target device is added, will allow picking an arbitrary LUN
for passed-through devices.

This patch duplicates from scsi-disk the handling of REPORT LUNS and of
INQUIRY for invalid LUNs.  This is temporary and is going away after
the necessary infrastructure is added to qdev.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi-generic.c |   39 +++++++++++++++++++++++++++++++++------
 1 files changed, 33 insertions(+), 6 deletions(-)

diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 94aca18..1611023 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -60,7 +60,6 @@ struct SCSIGenericState
 {
     SCSIDevice qdev;
     BlockDriverState *bs;
-    int lun;
     int driver_status;
     uint8_t sensebuf[SCSI_SENSE_BUF_SIZE];
     uint8_t senselen;
@@ -232,8 +231,11 @@ static void scsi_read_data(SCSIRequest *req)
         return;
     }
 
-    if (r->req.cmd.buf[0] == REQUEST_SENSE && s->driver_status & SG_ERR_DRIVER_SENSE)
-    {
+    switch (r->req.cmd.buf[0]) {
+    case REQUEST_SENSE:
+        if (!(s->driver_status & SG_ERR_DRIVER_SENSE)) {
+            break;
+        }
         s->senselen = MIN(r->len, s->senselen);
         memcpy(r->buf, s->sensebuf, s->senselen);
         r->io_header.driver_status = 0;
@@ -248,6 +250,32 @@ static void scsi_read_data(SCSIRequest *req)
         /* Clear sensebuf after REQUEST_SENSE */
         scsi_clear_sense(s);
         return;
+
+    case REPORT_LUNS:
+	assert(!s->qdev.lun);
+        if (r->req.cmd.xfer < 16) {
+            scsi_command_complete(r, -EINVAL);
+            return;
+        }
+        r->io_header.driver_status = 0;
+        r->io_header.status = 0;
+        r->io_header.dxfer_len  = 16;
+        r->len = -1;
+        r->buf[3] = 8;
+        scsi_req_data(&r->req, 16);
+        scsi_command_complete(r, 0);
+        return;
+
+    case INQUIRY:
+        if (req->lun != s->qdev.lun) {
+            if (r->req.cmd.xfer < 1) {
+                scsi_command_complete(r, -EINVAL);
+                return;
+            }
+            r->buf[0] = 0x7f;
+            return;
+        }
+        break;
     }
 
     ret = execute_command(s->bs, r, SG_DXFER_FROM_DEV, scsi_read_complete);
@@ -338,7 +366,8 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
     int ret;
 
-    if (cmd[0] != REQUEST_SENSE && req->lun != s->lun) {
+    if (cmd[0] != REQUEST_SENSE && cmd[0] != INQUIRY &&
+	req->lun != s->qdev.lun) {
         DPRINTF("Unimplemented LUN %d\n", req->lun);
         scsi_set_sense(s, SENSE_CODE(LUN_NOT_SUPPORTED));
         r->req.status = CHECK_CONDITION;
@@ -505,8 +534,6 @@ static int scsi_generic_initfn(SCSIDevice *dev)
     }
 
     /* define device state */
-    s->lun = scsiid.lun;
-    DPRINTF("LUN %d\n", s->lun);
     s->qdev.type = scsiid.scsi_type;
     DPRINTF("device type %d\n", s->qdev.type);
     if (s->qdev.type == TYPE_TAPE) {
-- 
1.7.4.4

  parent reply	other threads:[~2011-06-06 16:05 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-06 16:04 [Qemu-devel] [RFC PATCH v2 00/13] support hierarchical LUNs Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 01/13] scsi: cleanup reset and destroy callbacks Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 02/13] scsi: support parsing of SAM logical unit numbers Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 03/13] scsi: add initiator field to SCSIRequest Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 04/13] scsi: let a SCSIDevice have children devices Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 05/13] scsi: let the bus pick a LUN for the child device Paolo Bonzini
2011-06-06 16:04 ` Paolo Bonzini [this message]
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 07/13] scsi: add walking of hierarchical LUNs Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 08/13] scsi: introduce the scsi-path device Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 09/13] scsi: introduce the scsi-target device Paolo Bonzini
2011-06-07  8:09   ` Stefan Hajnoczi
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 10/13] scsi: include bus and device levels Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 11/13] qdev: introduce automatic creation of buses Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 12/13] scsi: create scsi-path and scsi-target devices automatically Paolo Bonzini
2011-06-06 16:04 ` [Qemu-devel] [RFC PATCH v2 13/13] scsi: delete handling of REPORT LUNS and unknown LUNs outside scsi-target Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1307376262-1255-7-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).