[Qemu-devel] [PATCH v5 15/23] fdc: Parametrize ISA base, IRQ and DMA

["Andreas Färber" <andreas.faerber@web.de>]

From: Hervé Poussineau <hpoussin@reactos.org>

Keep the PC values as defaults but allow to override them for PReP.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
---
 hw/fdc.c |   27 +++++++++++++++------------
 1 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/hw/fdc.c b/hw/fdc.c
index edf0360..f4e3e0d 100644
--- a/hw/fdc.c
+++ b/hw/fdc.c
@@ -425,6 +425,9 @@ typedef struct FDCtrlSysBus {
 
 typedef struct FDCtrlISABus {
     ISADevice busdev;
+    uint32_t iobase;
+    uint32_t irq;
+    uint32_t dma;
     struct FDCtrl state;
     int32_t bootindexA;
     int32_t bootindexB;
@@ -1895,26 +1898,23 @@ static int isabus_fdc_init1(ISADevice *dev)
 {
     FDCtrlISABus *isa = DO_UPCAST(FDCtrlISABus, busdev, dev);
     FDCtrl *fdctrl = &isa->state;
-    int iobase = 0x3f0;
-    int isairq = 6;
-    int dma_chann = 2;
     int ret;
 
-    register_ioport_read(iobase + 0x01, 5, 1,
+    register_ioport_read(isa->iobase + 0x01, 5, 1,
                          &fdctrl_read_port, fdctrl);
-    register_ioport_read(iobase + 0x07, 1, 1,
+    register_ioport_read(isa->iobase + 0x07, 1, 1,
                          &fdctrl_read_port, fdctrl);
-    register_ioport_write(iobase + 0x01, 5, 1,
+    register_ioport_write(isa->iobase + 0x01, 5, 1,
                           &fdctrl_write_port, fdctrl);
-    register_ioport_write(iobase + 0x07, 1, 1,
+    register_ioport_write(isa->iobase + 0x07, 1, 1,
                           &fdctrl_write_port, fdctrl);
-    isa_init_ioport_range(dev, iobase, 6);
-    isa_init_ioport(dev, iobase + 7);
+    isa_init_ioport_range(dev, isa->iobase, 6);
+    isa_init_ioport(dev, isa->iobase + 7);
 
-    isa_init_irq(&isa->busdev, &fdctrl->irq, isairq);
-    fdctrl->dma_chann = dma_chann;
+    isa_init_irq(&isa->busdev, &fdctrl->irq, isa->irq);
+    fdctrl->dma_chann = isa->dma;
 
-    qdev_set_legacy_instance_id(&dev->qdev, iobase, 2);
+    qdev_set_legacy_instance_id(&dev->qdev, isa->iobase, 2);
     ret = fdctrl_init_common(fdctrl);
 
     add_boot_device_path(isa->bootindexA, &dev->qdev, "/floppy@0");
@@ -1979,6 +1979,9 @@ static ISADeviceInfo isa_fdc_info = {
     .qdev.vmsd  = &vmstate_isa_fdc,
     .qdev.reset = fdctrl_external_reset_isa,
     .qdev.props = (Property[]) {
+        DEFINE_PROP_HEX32("iobase", FDCtrlISABus, iobase, 0x3f0),
+        DEFINE_PROP_UINT32("irq", FDCtrlISABus, irq, 6),
+        DEFINE_PROP_UINT32("dma", FDCtrlISABus, dma, 2),
         DEFINE_PROP_DRIVE("driveA", FDCtrlISABus, state.drives[0].bs),
         DEFINE_PROP_DRIVE("driveB", FDCtrlISABus, state.drives[1].bs),
         DEFINE_PROP_INT32("bootindexA", FDCtrlISABus, bootindexA, -1),
-- 
1.7.5.3