From: Avi Kivity <avi@redhat.com>
To: qemu-devel@nongnu.org
Cc: kvm@vger.kernel.org
Subject: [Qemu-devel] [RFC v2 12/20] usb-ohci: convert to MemoryRegion
Date: Mon, 27 Jun 2011 16:21:59 +0300 [thread overview]
Message-ID: <1309180927-19003-13-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1309180927-19003-1-git-send-email-avi@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
hw/usb-ohci.c | 42 +++++++++++++++++-------------------------
1 files changed, 17 insertions(+), 25 deletions(-)
diff --git a/hw/usb-ohci.c b/hw/usb-ohci.c
index 5d2ae01..e6a901f 100644
--- a/hw/usb-ohci.c
+++ b/hw/usb-ohci.c
@@ -62,7 +62,7 @@ typedef struct OHCIPort {
typedef struct {
USBBus bus;
qemu_irq irq;
- int mem;
+ MemoryRegion mem;
int num_ports;
const char *name;
@@ -1415,13 +1415,13 @@ static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val)
return;
}
-static uint32_t ohci_mem_read(void *ptr, target_phys_addr_t addr)
+static uint64_t ohci_mem_read(MemoryRegion *mem,
+ target_phys_addr_t addr,
+ unsigned size)
{
- OHCIState *ohci = ptr;
+ OHCIState *ohci = container_of(mem, OHCIState, mem);
uint32_t retval;
- addr &= 0xff;
-
/* Only aligned reads are allowed on OHCI */
if (addr & 3) {
fprintf(stderr, "usb-ohci: Mis-aligned read\n");
@@ -1538,11 +1538,12 @@ static uint32_t ohci_mem_read(void *ptr, target_phys_addr_t addr)
return retval;
}
-static void ohci_mem_write(void *ptr, target_phys_addr_t addr, uint32_t val)
+static void ohci_mem_write(MemoryRegion *mem,
+ target_phys_addr_t addr,
+ uint64_t val,
+ unsigned size)
{
- OHCIState *ohci = ptr;
-
- addr &= 0xff;
+ OHCIState *ohci = container_of(mem, OHCIState, mem);
/* Only aligned reads are allowed on OHCI */
if (addr & 3) {
@@ -1674,18 +1675,10 @@ static void ohci_device_destroy(USBBus *bus, USBDevice *dev)
}
}
-/* Only dword reads are defined on OHCI register space */
-static CPUReadMemoryFunc * const ohci_readfn[3]={
- ohci_mem_read,
- ohci_mem_read,
- ohci_mem_read
-};
-
-/* Only dword writes are defined on OHCI register space */
-static CPUWriteMemoryFunc * const ohci_writefn[3]={
- ohci_mem_write,
- ohci_mem_write,
- ohci_mem_write
+static const MemoryRegionOps ohci_mem_ops = {
+ .read = ohci_mem_read,
+ .write = ohci_mem_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
};
static USBPortOps ohci_port_ops = {
@@ -1720,8 +1713,7 @@ static void usb_ohci_init(OHCIState *ohci, DeviceState *dev,
usb_frame_time, usb_bit_time);
}
- ohci->mem = cpu_register_io_memory(ohci_readfn, ohci_writefn, ohci,
- DEVICE_LITTLE_ENDIAN);
+ memory_region_init_io(&ohci->mem, &ohci_mem_ops, "ohci", 256);
ohci->localmem_base = localmem_base;
ohci->name = dev->info->name;
@@ -1756,7 +1748,7 @@ static int usb_ohci_initfn_pci(struct PCIDevice *dev)
ohci->state.irq = ohci->pci_dev.irq[0];
/* TODO: avoid cast below by using dev */
- pci_register_bar_simple(&ohci->pci_dev, 0, 256, 0, ohci->state.mem);
+ pci_register_bar_region(&ohci->pci_dev, 0, 0, &ohci->state.mem);
return 0;
}
@@ -1778,7 +1770,7 @@ static int ohci_init_pxa(SysBusDevice *dev)
usb_ohci_init(&s->ohci, &dev->qdev, s->num_ports, s->dma_offset);
sysbus_init_irq(dev, &s->ohci.irq);
- sysbus_init_mmio(dev, 0x1000, s->ohci.mem);
+ sysbus_init_mmio_region(dev, &s->ohci.mem);
return 0;
}
--
1.7.5.3
next prev parent reply other threads:[~2011-06-27 13:22 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-27 13:21 [Qemu-devel] [RFC v2 00/20] Memory API Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 01/20] Hierarchical memory region API Avi Kivity
2011-06-28 10:03 ` Michael S. Tsirkin
2011-06-28 10:28 ` Jan Kiszka
2011-06-28 11:53 ` Avi Kivity
2011-06-28 12:07 ` Jan Kiszka
2011-06-28 12:09 ` Avi Kivity
2011-06-28 12:46 ` Jan Kiszka
2011-06-28 12:53 ` Avi Kivity
2011-06-28 13:25 ` Peter Maydell
2011-06-28 13:36 ` Avi Kivity
2011-06-28 16:27 ` Olivier Galibert
2011-06-28 11:51 ` Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 02/20] memory: implement dirty tracking Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 03/20] memory: merge adjacent segments of a single memory region Avi Kivity
2011-06-27 13:56 ` Jan Kiszka
2011-06-27 14:11 ` Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 04/20] Internal interfaces for memory API Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 05/20] exec.c: initialize memory map Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 06/20] pc: grab system_memory Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 07/20] pc: convert pc_memory_init() to memory API Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 08/20] pc: move global memory map out of pc_init1() and into its callers Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 09/20] pci: pass address space to pci bus when created Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 10/20] pci: add MemoryRegion based BAR management API Avi Kivity
2011-06-27 13:21 ` [Qemu-devel] [RFC v2 11/20] sysbus: add MemoryRegion based memory " Avi Kivity
2011-06-27 13:21 ` Avi Kivity [this message]
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 13/20] pci: add API to get a BAR's mapped address Avi Kivity
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 14/20] vmsvga: don't remember pci BAR address in callback any more Avi Kivity
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 15/20] vga: convert vga and its derivatives to the memory API Avi Kivity
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 16/20] cirrus: simplify mmio BAR access functions Avi Kivity
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 17/20] cirrus: simplify bitblt " Avi Kivity
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 18/20] cirrus: simplify vga window mmio " Avi Kivity
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 19/20] vga: " Avi Kivity
2011-06-27 13:22 ` [Qemu-devel] [RFC v2 20/20] cirrus: simplify linear framebuffer " Avi Kivity
2011-06-27 15:13 ` [Qemu-devel] [RFC v2 00/20] Memory API Avi Kivity
2011-06-27 15:52 ` Michael S. Tsirkin
2011-06-27 15:54 ` Avi Kivity
2011-06-27 15:59 ` Michael S. Tsirkin
2011-06-27 16:10 ` Avi Kivity
2011-06-27 20:28 ` Anthony Liguori
2011-06-27 15:37 ` Anthony Liguori
2011-06-27 15:44 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309180927-19003-13-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).