From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Subject: [Qemu-devel] [PATCHv2 1/3] ds1225y: Remove protection stuff, which doesn't belong to this device
Date: Sat, 2 Jul 2011 09:57:01 +0200 [thread overview]
Message-ID: <1309593423-17073-2-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <1309593423-17073-1-git-send-email-hpoussin@reactos.org>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
hw/ds1225y.c | 42 +-----------------------------------------
hw/mips.h | 1 -
2 files changed, 1 insertions(+), 42 deletions(-)
diff --git a/hw/ds1225y.c b/hw/ds1225y.c
index b1c5232..1fd7010 100644
--- a/hw/ds1225y.c
+++ b/hw/ds1225y.c
@@ -33,7 +33,6 @@ typedef struct ds1225y_t
uint32_t chip_size;
QEMUFile *file;
uint8_t *contents;
- uint8_t protection;
} ds1225y_t;
@@ -98,34 +97,6 @@ static void nvram_writel (void *opaque, target_phys_addr_t addr, uint32_t val)
nvram_writeb(opaque, addr + 3, (val >> 24) & 0xff);
}
-static void nvram_writeb_protected (void *opaque, target_phys_addr_t addr, uint32_t val)
-{
- ds1225y_t *s = opaque;
-
- if (s->protection != 7) {
-#ifdef DEBUG_NVRAM
- printf("nvram: prevent write of 0x%x at " TARGET_FMT_lx "\n", val, addr);
-#endif
- return;
- }
-
- nvram_writeb(opaque, addr, val);
-}
-
-static void nvram_writew_protected (void *opaque, target_phys_addr_t addr, uint32_t val)
-{
- nvram_writeb_protected(opaque, addr, val & 0xff);
- nvram_writeb_protected(opaque, addr + 1, (val >> 8) & 0xff);
-}
-
-static void nvram_writel_protected (void *opaque, target_phys_addr_t addr, uint32_t val)
-{
- nvram_writeb_protected(opaque, addr, val & 0xff);
- nvram_writeb_protected(opaque, addr + 1, (val >> 8) & 0xff);
- nvram_writeb_protected(opaque, addr + 2, (val >> 16) & 0xff);
- nvram_writeb_protected(opaque, addr + 3, (val >> 24) & 0xff);
-}
-
static CPUReadMemoryFunc * const nvram_read[] = {
&nvram_readb,
&nvram_readw,
@@ -138,23 +109,16 @@ static CPUWriteMemoryFunc * const nvram_write[] = {
&nvram_writel,
};
-static CPUWriteMemoryFunc * const nvram_write_protected[] = {
- &nvram_writeb_protected,
- &nvram_writew_protected,
- &nvram_writel_protected,
-};
-
/* Initialisation routine */
void *ds1225y_init(target_phys_addr_t mem_base, const char *filename)
{
ds1225y_t *s;
- int mem_indexRW, mem_indexRP;
+ int mem_indexRW;
QEMUFile *file;
s = qemu_mallocz(sizeof(ds1225y_t));
s->chip_size = 0x2000; /* Fixed for ds1225y chip: 8 KiB */
s->contents = qemu_mallocz(s->chip_size);
- s->protection = 7;
/* Read current file */
file = qemu_fopen(filename, "rb");
@@ -174,9 +138,5 @@ void *ds1225y_init(target_phys_addr_t mem_base, const char *filename)
mem_indexRW = cpu_register_io_memory(nvram_read, nvram_write, s,
DEVICE_NATIVE_ENDIAN);
cpu_register_physical_memory(mem_base, s->chip_size, mem_indexRW);
- /* Read/write protected memory */
- mem_indexRP = cpu_register_io_memory(nvram_read, nvram_write_protected, s,
- DEVICE_NATIVE_ENDIAN);
- cpu_register_physical_memory(mem_base + s->chip_size, s->chip_size, mem_indexRP);
return s;
}
diff --git a/hw/mips.h b/hw/mips.h
index 73aa8f8..93c8831 100644
--- a/hw/mips.h
+++ b/hw/mips.h
@@ -10,7 +10,6 @@ PCIBus *bonito_init(qemu_irq *pic);
/* ds1225y.c */
void *ds1225y_init(target_phys_addr_t mem_base, const char *filename);
-void ds1225y_set_protection(void *opaque, int protection);
/* g364fb.c */
int g364fb_mm_init(target_phys_addr_t vram_base,
--
1.7.5.4
next prev parent reply other threads:[~2011-07-02 7:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-02 7:57 [Qemu-devel] [PATCHv2 0/3] ds1225y: qdev-ification (used in MIPS Jazz) Hervé Poussineau
2011-07-02 7:57 ` Hervé Poussineau [this message]
2011-07-02 7:57 ` [Qemu-devel] [PATCHv2 2/3] ds1225y: use trace framework Hervé Poussineau
2011-07-02 8:42 ` Stefan Hajnoczi
2011-07-02 7:57 ` [Qemu-devel] [PATCHv2 3/3] ds1225y: convert to qdev device, and use it in MIPS Jazz emulation Hervé Poussineau
2011-07-16 11:21 ` Blue Swirl
2011-07-15 17:53 ` [Qemu-devel] [PATCHv2 0/3] ds1225y: qdev-ification (used in MIPS Jazz) Hervé Poussineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309593423-17073-2-git-send-email-hpoussin@reactos.org \
--to=hpoussin@reactos.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).