[Qemu-devel] [PATCH 22/23] usb-hub: remove unused descriptor arrays

[Gerd Hoffmann <kraxel@redhat.com>]

Somehow they where left over when converting the hub
to the new usb descriptor infrastructure ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/usb-hub.c |   68 ----------------------------------------------------------
 1 files changed, 0 insertions(+), 68 deletions(-)

diff --git a/hw/usb-hub.c b/hw/usb-hub.c
index b7557ce..b49a2fe 100644
--- a/hw/usb-hub.c
+++ b/hw/usb-hub.c
@@ -138,74 +138,6 @@ static const USBDesc desc_hub = {
     .str  = desc_strings,
 };
 
-static const uint8_t qemu_hub_dev_descriptor[] = {
-	0x12,       /*  u8 bLength; */
-	0x01,       /*  u8 bDescriptorType; Device */
-	0x10, 0x01, /*  u16 bcdUSB; v1.1 */
-
-	0x09,	    /*  u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	    /*  u8  bDeviceSubClass; */
-	0x00,       /*  u8  bDeviceProtocol; [ low/full speeds only ] */
-	0x08,       /*  u8  bMaxPacketSize0; 8 Bytes */
-
-	0x00, 0x00, /*  u16 idVendor; */
- 	0x00, 0x00, /*  u16 idProduct; */
-	0x01, 0x01, /*  u16 bcdDevice */
-
-	0x03,       /*  u8  iManufacturer; */
-	0x02,       /*  u8  iProduct; */
-	0x01,       /*  u8  iSerialNumber; */
-	0x01        /*  u8  bNumConfigurations; */
-};
-
-/* XXX: patch interrupt size */
-static const uint8_t qemu_hub_config_descriptor[] = {
-
-	/* one configuration */
-	0x09,       /*  u8  bLength; */
-	0x02,       /*  u8  bDescriptorType; Configuration */
-	0x19, 0x00, /*  u16 wTotalLength; */
-	0x01,       /*  u8  bNumInterfaces; (1) */
-	0x01,       /*  u8  bConfigurationValue; */
-	0x00,       /*  u8  iConfiguration; */
-	0xe0,       /*  u8  bmAttributes;
-				 Bit 7: must be set,
-				     6: Self-powered,
-				     5: Remote wakeup,
-				     4..0: resvd */
-	0x00,       /*  u8  MaxPower; */
-
-	/* USB 1.1:
-	 * USB 2.0, single TT organization (mandatory):
-	 *	one interface, protocol 0
-	 *
-	 * USB 2.0, multiple TT organization (optional):
-	 *	two interfaces, protocols 1 (like single TT)
-	 *	and 2 (multiple TT mode) ... config is
-	 *	sometimes settable
-	 *	NOT IMPLEMENTED
-	 */
-
-	/* one interface */
-	0x09,       /*  u8  if_bLength; */
-	0x04,       /*  u8  if_bDescriptorType; Interface */
-	0x00,       /*  u8  if_bInterfaceNumber; */
-	0x00,       /*  u8  if_bAlternateSetting; */
-	0x01,       /*  u8  if_bNumEndpoints; */
-	0x09,       /*  u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,       /*  u8  if_bInterfaceSubClass; */
-	0x00,       /*  u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
-	0x00,       /*  u8  if_iInterface; */
-
-	/* one endpoint (status change endpoint) */
-	0x07,       /*  u8  ep_bLength; */
-	0x05,       /*  u8  ep_bDescriptorType; Endpoint */
-	0x81,       /*  u8  ep_bEndpointAddress; IN Endpoint 1 */
- 	0x03,       /*  u8  ep_bmAttributes; Interrupt */
- 	0x02, 0x00, /*  u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
-	0xff        /*  u8  ep_bInterval; (255ms -- usb 2.0 spec) */
-};
-
 static const uint8_t qemu_hub_hub_descriptor[] =
 {
 	0x00,			/*  u8  bLength; patched in later */
-- 
1.7.1