From: Hannes Reinecke <hare@suse.de>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Hannes Reinecke <hare@suse.de>,
Markus Armbruster <armbru@redhat.com>,
kvm@vger.kernel.org, Alexander Graf <agraf@suse.de>
Subject: [Qemu-devel] [PATCH 1/3] scsi: Sanitize command definitions
Date: Fri, 22 Jul 2011 14:31:06 +0200 [thread overview]
Message-ID: <1311337868-20746-2-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1311337868-20746-1-git-send-email-hare@suse.de>
Adding some missing command definitions and update the existing ones.
No functional change.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
hw/scsi-bus.c | 71 ++++++++++++++++++++++++++++++----------------------
hw/scsi-defs.h | 60 ++++++++++++++++++++++++++++----------------
hw/scsi-disk.c | 29 ++++++++-------------
hw/scsi-generic.c | 2 +-
4 files changed, 91 insertions(+), 71 deletions(-)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 8b1a412..24a1298 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -232,24 +232,24 @@ static int scsi_req_length(SCSIRequest *req, uint8_t *cmd)
case RELEASE:
case ERASE:
case ALLOW_MEDIUM_REMOVAL:
- case VERIFY:
+ case VERIFY_10:
case SEEK_10:
case SYNCHRONIZE_CACHE:
case LOCK_UNLOCK_CACHE:
case LOAD_UNLOAD:
case SET_CD_SPEED:
case SET_LIMITS:
- case WRITE_LONG:
+ case WRITE_LONG_10:
case MOVE_MEDIUM:
case UPDATE_BLOCK:
req->cmd.xfer = 0;
break;
case MODE_SENSE:
break;
- case WRITE_SAME:
+ case WRITE_SAME_10:
req->cmd.xfer = 1;
break;
- case READ_CAPACITY:
+ case READ_CAPACITY_10:
req->cmd.xfer = 8;
break;
case READ_BLOCK_LIMITS:
@@ -265,7 +265,7 @@ static int scsi_req_length(SCSIRequest *req, uint8_t *cmd)
req->cmd.xfer *= 8;
break;
case WRITE_10:
- case WRITE_VERIFY:
+ case WRITE_VERIFY_10:
case WRITE_6:
case WRITE_12:
case WRITE_VERIFY_12:
@@ -325,7 +325,7 @@ static void scsi_req_xfer_mode(SCSIRequest *req)
switch (req->cmd.buf[0]) {
case WRITE_6:
case WRITE_10:
- case WRITE_VERIFY:
+ case WRITE_VERIFY_10:
case WRITE_12:
case WRITE_VERIFY_12:
case WRITE_16:
@@ -345,15 +345,13 @@ static void scsi_req_xfer_mode(SCSIRequest *req)
case SEARCH_HIGH:
case SEARCH_LOW:
case UPDATE_BLOCK:
- case WRITE_LONG:
- case WRITE_SAME:
+ case WRITE_LONG_10:
+ case WRITE_SAME_10:
case SEARCH_HIGH_12:
case SEARCH_EQUAL_12:
case SEARCH_LOW_12:
- case SET_WINDOW:
case MEDIUM_SCAN:
case SEND_VOLUME_TAG:
- case WRITE_LONG_2:
case PERSISTENT_RESERVE_OUT:
case MAINTENANCE_OUT:
req->cmd.mode = SCSI_XFER_TO_DEV;
@@ -517,8 +515,7 @@ static const char *scsi_command_name(uint8_t cmd)
{
static const char *names[] = {
[ TEST_UNIT_READY ] = "TEST_UNIT_READY",
- [ REZERO_UNIT ] = "REZERO_UNIT",
- /* REWIND and REZERO_UNIT use the same operation code */
+ [ REWIND ] = "REWIND",
[ REQUEST_SENSE ] = "REQUEST_SENSE",
[ FORMAT_UNIT ] = "FORMAT_UNIT",
[ READ_BLOCK_LIMITS ] = "READ_BLOCK_LIMITS",
@@ -543,14 +540,13 @@ static const char *scsi_command_name(uint8_t cmd)
[ RECEIVE_DIAGNOSTIC ] = "RECEIVE_DIAGNOSTIC",
[ SEND_DIAGNOSTIC ] = "SEND_DIAGNOSTIC",
[ ALLOW_MEDIUM_REMOVAL ] = "ALLOW_MEDIUM_REMOVAL",
-
[ SET_WINDOW ] = "SET_WINDOW",
- [ READ_CAPACITY ] = "READ_CAPACITY",
+ [ READ_CAPACITY_10 ] = "READ_CAPACITY_10",
[ READ_10 ] = "READ_10",
[ WRITE_10 ] = "WRITE_10",
[ SEEK_10 ] = "SEEK_10",
- [ WRITE_VERIFY ] = "WRITE_VERIFY",
- [ VERIFY ] = "VERIFY",
+ [ WRITE_VERIFY_10 ] = "WRITE_VERIFY_10",
+ [ VERIFY_10 ] = "VERIFY_10",
[ SEARCH_HIGH ] = "SEARCH_HIGH",
[ SEARCH_EQUAL ] = "SEARCH_EQUAL",
[ SEARCH_LOW ] = "SEARCH_LOW",
@@ -566,11 +562,14 @@ static const char *scsi_command_name(uint8_t cmd)
[ WRITE_BUFFER ] = "WRITE_BUFFER",
[ READ_BUFFER ] = "READ_BUFFER",
[ UPDATE_BLOCK ] = "UPDATE_BLOCK",
- [ READ_LONG ] = "READ_LONG",
- [ WRITE_LONG ] = "WRITE_LONG",
+ [ READ_LONG_10 ] = "READ_LONG_10",
+ [ WRITE_LONG_10 ] = "WRITE_LONG_10",
[ CHANGE_DEFINITION ] = "CHANGE_DEFINITION",
- [ WRITE_SAME ] = "WRITE_SAME",
+ [ WRITE_SAME_10 ] = "WRITE_SAME_10",
+ [ UNMAP ] = "UNMAP",
[ READ_TOC ] = "READ_TOC",
+ [ REPORT_DENSITY_SUPPORT ] = "REPORT_DENSITY_SUPPORT",
+ [ GET_CONFIGURATION ] = "GET_CONFIGURATION",
[ LOG_SELECT ] = "LOG_SELECT",
[ LOG_SENSE ] = "LOG_SENSE",
[ MODE_SELECT_10 ] = "MODE_SELECT_10",
@@ -579,27 +578,39 @@ static const char *scsi_command_name(uint8_t cmd)
[ MODE_SENSE_10 ] = "MODE_SENSE_10",
[ PERSISTENT_RESERVE_IN ] = "PERSISTENT_RESERVE_IN",
[ PERSISTENT_RESERVE_OUT ] = "PERSISTENT_RESERVE_OUT",
+ [ WRITE_FILEMARKS_16 ] = "WRITE_FILEMARKS_16",
+ [ EXTENDED_COPY ] = "EXTENDED_COPY",
+ [ ATA_PASSTHROUGH ] = "ATA_PASSTHROUGH",
+ [ ACCESS_CONTROL_IN ] = "ACCESS_CONTROL_IN",
+ [ ACCESS_CONTROL_OUT ] = "ACCESS_CONTROL_OUT",
+ [ READ_16 ] = "READ_16",
+ [ COMPARE_AND_WRITE ] = "COMPARE_AND_WRITE",
+ [ WRITE_16 ] = "WRITE_16",
+ [ WRITE_VERIFY_16 ] = "WRITE_VERIFY_16",
+ [ VERIFY_16 ] = "VERIFY_16",
+ [ SYNCHRONIZE_CACHE_16 ] = "SYNCHRONIZE_CACHE_16",
+ [ LOCATE_16 ] = "LOCATE_16",
+ [ WRITE_SAME_16 ] = "WRITE_SAME_16",
+ [ ERASE_16 ] = "ERASE_16",
+ [ SERVICE_ACTION_IN ] = "SERVICE_ACTION_IN",
+ [ WRITE_LONG_16 ] = "WRITE_LONG_16",
+ [ REPORT_LUNS ] = "REPORT_LUNS",
+ [ BLANK ] = "BLANK",
+ [ MAINTENANCE_IN ] = "MAINTENANCE_IN",
+ [ MAINTENANCE_OUT ] = "MAINTENANCE_OUT",
[ MOVE_MEDIUM ] = "MOVE_MEDIUM",
+ [ LOAD_UNLOAD ] = "LOAD_UNLOAD",
[ READ_12 ] = "READ_12",
[ WRITE_12 ] = "WRITE_12",
[ WRITE_VERIFY_12 ] = "WRITE_VERIFY_12",
+ [ VERIFY_12 ] = "VERIFY_12",
[ SEARCH_HIGH_12 ] = "SEARCH_HIGH_12",
[ SEARCH_EQUAL_12 ] = "SEARCH_EQUAL_12",
[ SEARCH_LOW_12 ] = "SEARCH_LOW_12",
[ READ_ELEMENT_STATUS ] = "READ_ELEMENT_STATUS",
[ SEND_VOLUME_TAG ] = "SEND_VOLUME_TAG",
- [ WRITE_LONG_2 ] = "WRITE_LONG_2",
-
- [ REPORT_DENSITY_SUPPORT ] = "REPORT_DENSITY_SUPPORT",
- [ GET_CONFIGURATION ] = "GET_CONFIGURATION",
- [ READ_16 ] = "READ_16",
- [ WRITE_16 ] = "WRITE_16",
- [ WRITE_VERIFY_16 ] = "WRITE_VERIFY_16",
- [ SERVICE_ACTION_IN ] = "SERVICE_ACTION_IN",
- [ REPORT_LUNS ] = "REPORT_LUNS",
- [ LOAD_UNLOAD ] = "LOAD_UNLOAD",
+ [ READ_DEFECT_DATA ] = "READ_DEFECT_DATA",
[ SET_CD_SPEED ] = "SET_CD_SPEED",
- [ BLANK ] = "BLANK",
};
if (cmd >= ARRAY_SIZE(names) || names[cmd] == NULL)
diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index 413cce0..458a797 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -26,6 +26,7 @@
#define TEST_UNIT_READY 0x00
#define REZERO_UNIT 0x01
+#define REWIND 0x01
#define REQUEST_SENSE 0x03
#define FORMAT_UNIT 0x04
#define READ_BLOCK_LIMITS 0x05
@@ -48,14 +49,14 @@
#define RECEIVE_DIAGNOSTIC 0x1c
#define SEND_DIAGNOSTIC 0x1d
#define ALLOW_MEDIUM_REMOVAL 0x1e
-
#define SET_WINDOW 0x24
-#define READ_CAPACITY 0x25
+#define READ_CAPACITY_10 0x25
#define READ_10 0x28
#define WRITE_10 0x2a
#define SEEK_10 0x2b
-#define WRITE_VERIFY 0x2e
-#define VERIFY 0x2f
+#define LOCATE_10 0x2b
+#define WRITE_VERIFY_10 0x2e
+#define VERIFY_10 0x2f
#define SEARCH_HIGH 0x30
#define SEARCH_EQUAL 0x31
#define SEARCH_LOW 0x32
@@ -71,11 +72,14 @@
#define WRITE_BUFFER 0x3b
#define READ_BUFFER 0x3c
#define UPDATE_BLOCK 0x3d
-#define READ_LONG 0x3e
-#define WRITE_LONG 0x3f
+#define READ_LONG_10 0x3e
+#define WRITE_LONG_10 0x3f
#define CHANGE_DEFINITION 0x40
-#define WRITE_SAME 0x41
+#define WRITE_SAME_10 0x41
+#define UNMAP 0x42
#define READ_TOC 0x43
+#define REPORT_DENSITY_SUPPORT 0x44
+#define GET_CONFIGURATION 0x46
#define LOG_SELECT 0x4c
#define LOG_SENSE 0x4d
#define MODE_SELECT_10 0x55
@@ -84,32 +88,40 @@
#define MODE_SENSE_10 0x5a
#define PERSISTENT_RESERVE_IN 0x5e
#define PERSISTENT_RESERVE_OUT 0x5f
+#define VARLENGTH_CDB 0x7f
+#define WRITE_FILEMARKS_16 0x80
+#define EXTENDED_COPY 0x83
+#define ATA_PASSTHROUGH 0x85
+#define ACCESS_CONTROL_IN 0x86
+#define ACCESS_CONTROL_OUT 0x87
+#define READ_16 0x88
+#define COMPARE_AND_WRITE 0x89
+#define WRITE_16 0x8a
+#define WRITE_VERIFY_16 0x8e
+#define VERIFY_16 0x8f
+#define SYNCHRONIZE_CACHE_16 0x91
+#define LOCATE_16 0x92
#define WRITE_SAME_16 0x93
+#define ERASE_16 0x93
+#define SERVICE_ACTION_IN 0x9e
+#define WRITE_LONG_16 0x9f
+#define REPORT_LUNS 0xa0
+#define BLANK 0xa1
#define MAINTENANCE_IN 0xa3
#define MAINTENANCE_OUT 0xa4
#define MOVE_MEDIUM 0xa5
+#define LOAD_UNLOAD 0xa6
#define READ_12 0xa8
#define WRITE_12 0xaa
#define WRITE_VERIFY_12 0xae
+#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
#define SEARCH_EQUAL_12 0xb1
#define SEARCH_LOW_12 0xb2
#define READ_ELEMENT_STATUS 0xb8
#define SEND_VOLUME_TAG 0xb6
-#define WRITE_LONG_2 0xea
-
-/* from hw/scsi-generic.c */
-#define REWIND 0x01
-#define REPORT_DENSITY_SUPPORT 0x44
-#define GET_CONFIGURATION 0x46
-#define READ_16 0x88
-#define WRITE_16 0x8a
-#define WRITE_VERIFY_16 0x8e
-#define SERVICE_ACTION_IN 0x9e
-#define REPORT_LUNS 0xa0
-#define LOAD_UNLOAD 0xa6
-#define SET_CD_SPEED 0xbb
-#define BLANK 0xa1
+#define READ_DEFECT_DATA_12 0xb7
+#define SET_CD_SPEED 0xbb
/*
* SAM Status codes
@@ -154,6 +166,7 @@
#define TYPE_DISK 0x00
#define TYPE_TAPE 0x01
+#define TYPE_PRINTER 0x02
#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
#define TYPE_WORM 0x04 /* Treated as ROM by our system */
#define TYPE_ROM 0x05
@@ -161,6 +174,9 @@
#define TYPE_MOD 0x07 /* Magneto-optical disk -
* - treated as TYPE_DISK */
#define TYPE_MEDIUM_CHANGER 0x08
-#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
+#define TYPE_STORAGE_ARRAY 0x0c /* Storage array device */
+#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
+#define TYPE_RBC 0x0e /* Simplified Direct-Access Device */
+#define TYPE_OSD 0x11 /* Object-storage Device */
#define TYPE_NO_LUN 0x7f
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 05d14ab..2f7e0c9 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -836,7 +836,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
case TEST_UNIT_READY:
if (!bdrv_is_inserted(s->bs))
goto not_ready;
- break;
+ break;
case REQUEST_SENSE:
if (req->cmd.xfer < 4)
goto illegal_request;
@@ -848,7 +848,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
buflen = scsi_disk_emulate_inquiry(req, outbuf);
if (buflen < 0)
goto illegal_request;
- break;
+ break;
case MODE_SENSE:
case MODE_SENSE_10:
buflen = scsi_disk_emulate_mode_sense(req, outbuf);
@@ -881,14 +881,14 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
/* load/eject medium */
bdrv_eject(s->bs, !(req->cmd.buf[4] & 1));
}
- break;
+ break;
case ALLOW_MEDIUM_REMOVAL:
bdrv_set_locked(s->bs, req->cmd.buf[4] & 1);
- break;
+ break;
case READ_CAPACITY:
/* The normal LEN field for this command is zero. */
- memset(outbuf, 0, 8);
- bdrv_get_geometry(s->bs, &nb_sectors);
+ memset(outbuf, 0, 8);
+ bdrv_get_geometry(s->bs, &nb_sectors);
if (!nb_sectors)
goto not_ready;
nb_sectors /= s->cluster_size;
@@ -908,7 +908,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
outbuf[6] = s->cluster_size * 2;
outbuf[7] = 0;
buflen = 8;
- break;
+ break;
case SYNCHRONIZE_CACHE:
ret = bdrv_flush(s->bs);
if (ret < 0) {
@@ -970,13 +970,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
outbuf[3] = 8;
buflen = 16;
break;
- case VERIFY:
- break;
- case REZERO_UNIT:
- DPRINTF("Rezero Unit\n");
- if (!bdrv_is_inserted(s->bs)) {
- goto not_ready;
- }
+ case VERIFY_10:
break;
default:
scsi_command_complete(r, CHECK_CONDITION, SENSE_CODE(INVALID_OPCODE));
@@ -1052,14 +1046,13 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case RELEASE_10:
case START_STOP:
case ALLOW_MEDIUM_REMOVAL:
- case READ_CAPACITY:
+ case READ_CAPACITY_10:
case SYNCHRONIZE_CACHE:
case READ_TOC:
case GET_CONFIGURATION:
case SERVICE_ACTION_IN:
case REPORT_LUNS:
- case VERIFY:
- case REZERO_UNIT:
+ case VERIFY_10:
rc = scsi_disk_emulate_command(r, outbuf);
if (rc < 0) {
return 0;
@@ -1082,7 +1075,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
case WRITE_10:
case WRITE_12:
case WRITE_16:
- case WRITE_VERIFY:
+ case WRITE_VERIFY_10:
case WRITE_VERIFY_12:
case WRITE_VERIFY_16:
len = r->req.cmd.xfer / s->qdev.blocksize;
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 90345a7..17e83c7 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -406,7 +406,7 @@ static int get_blocksize(BlockDriverState *bdrv)
memset(cmd, 0, sizeof(cmd));
memset(buf, 0, sizeof(buf));
- cmd[0] = READ_CAPACITY;
+ cmd[0] = READ_CAPACITY_10;
memset(&io_header, 0, sizeof(io_header));
io_header.interface_id = 'S';
--
1.7.3.4
next prev parent reply other threads:[~2011-07-22 12:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-22 12:31 [Qemu-devel] [PATCH 0/3] Check for supported SCSI commands Hannes Reinecke
2011-07-22 12:31 ` Hannes Reinecke [this message]
2011-07-22 14:07 ` [Qemu-devel] [PATCH 1/3] scsi: Sanitize command definitions Markus Armbruster
2011-07-22 14:14 ` Hannes Reinecke
2011-07-22 12:31 ` [Qemu-devel] [PATCH 2/3] scsi-disk: Remove drive_kind Hannes Reinecke
2011-07-22 12:31 ` [Qemu-devel] [PATCH 3/3] scsi-disk: Check for supported commands Hannes Reinecke
2011-07-22 14:09 ` Markus Armbruster
2011-07-22 14:15 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311337868-20746-2-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=agraf@suse.de \
--cc=armbru@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).