[Qemu-devel] [PATCH] block: add cache=directsync parameter to -drive

[Qemu-devel] [PATCH] block: add cache=directsync parameter to -drive

[Stefan Hajnoczi]

This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file
I/O with no disk write cache presented to the guest.

This mode is useful when guests may not be sending flushes when
appropriate and therefore leave data at risk in case of power failure.
When cache=directsync is used, write operations are only completed to
the guest when data is safely on disk.

This new mode is like cache=writethrough but it bypasses the host page
cache.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 block.c         |    4 ++--
 blockdev.c      |    2 ++
 qemu-config.c   |    3 ++-
 qemu-options.hx |    8 ++++++--
 4 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/block.c b/block.c
index 9549b9e..bbf9fa7 100644
--- a/block.c
+++ b/block.c
@@ -1100,8 +1100,8 @@ int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
         return ret;
     }
 
-    /* No flush needed for cache=writethrough, it uses O_DSYNC */
-    if ((bs->open_flags & BDRV_O_CACHE_MASK) != 0) {
+    /* No flush needed for cache modes that use O_DSYNC */
+    if ((bs->open_flags & BDRV_O_CACHE_WB) != 0) {
         bdrv_flush(bs);
     }
 
diff --git a/blockdev.c b/blockdev.c
index 0b8d3a4..9f7275c 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -323,6 +323,8 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
     if ((buf = qemu_opt_get(opts, "cache")) != NULL) {
         if (!strcmp(buf, "off") || !strcmp(buf, "none")) {
             bdrv_flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
+        } else if (!strcmp(buf, "directsync")) {
+            bdrv_flags |= BDRV_O_NOCACHE;
         } else if (!strcmp(buf, "writeback")) {
             bdrv_flags |= BDRV_O_CACHE_WB;
         } else if (!strcmp(buf, "unsafe")) {
diff --git a/qemu-config.c b/qemu-config.c
index 1eb6b9a..139e077 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -55,7 +55,8 @@ static QemuOptsList qemu_drive_opts = {
         },{
             .name = "cache",
             .type = QEMU_OPT_STRING,
-            .help = "host cache usage (none, writeback, writethrough, unsafe)",
+            .help = "host cache usage (none, writeback, writethrough, "
+                    "directsync, unsafe)",
         },{
             .name = "aio",
             .type = QEMU_OPT_STRING,
diff --git a/qemu-options.hx b/qemu-options.hx
index d86815d..35d95d1 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -133,7 +133,7 @@ ETEXI
 DEF("drive", HAS_ARG, QEMU_OPTION_drive,
     "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
     "       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
-    "       [,cache=writethrough|writeback|none|unsafe][,format=f]\n"
+    "       [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
     "       [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
     "       [,readonly=on|off]\n"
     "                use 'file' as a drive image\n", QEMU_ARCH_ALL)
@@ -164,7 +164,7 @@ These options have the same definition as they have in @option{-hdachs}.
 @item snapshot=@var{snapshot}
 @var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
 @item cache=@var{cache}
-@var{cache} is "none", "writeback", "unsafe", or "writethrough" and controls how the host cache is used to access block data.
+@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
 @item aio=@var{aio}
 @var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO.
 @item format=@var{format}
@@ -199,6 +199,10 @@ The host page cache can be avoided entirely with @option{cache=none}.  This will
 attempt to do disk IO directly to the guests memory.  QEMU may still perform
 an internal copy of the data.
 
+The host page cache can be avoided while only sending write notifications to
+the guest when the data has been reported as written by the storage subsystem
+using @option{cache=directsync}.
+
 Some block drivers perform badly with @option{cache=writethrough}, most notably,
 qcow2.  If performance is more important than correctness,
 @option{cache=writeback} should be used with qcow2.
-- 
1.7.5.4

Re: [Qemu-devel] [PATCH] block: add cache=directsync parameter to -drive

[Kevin Wolf]

Am 01.08.2011 11:39, schrieb Stefan Hajnoczi:
> This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file
> I/O with no disk write cache presented to the guest.
> 
> This mode is useful when guests may not be sending flushes when
> appropriate and therefore leave data at risk in case of power failure.
> When cache=directsync is used, write operations are only completed to
> the guest when data is safely on disk.
> 
> This new mode is like cache=writethrough but it bypasses the host page
> cache.
> 
> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>

qemu-img has another parser for cache options that must be changed. This
should probably be refactored to a single implementation in block.c.

Kevin