qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 6/6] target-alpha: Add high-resolution access to wall clock and an alarm.
Date: Thu, 25 Aug 2011 11:45:22 -1000	[thread overview]
Message-ID: <1314308722-14495-7-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1314308722-14495-1-git-send-email-rth@twiddle.net>

The alarm is a fully general one-shot time comparator, which will be
usable under Linux as a hrtimer source.  It's much more flexible than
the RTC source available on real hardware.

The wall clock allows the guest access to the host timekeeping.  Much
like the KVM wall clock source for other guests.

Both are accessed via the PALcode Cserve entry point.

Signed-off-by: Richard Henderson <rth@twiddle.net>
---
 hw/alpha_typhoon.c       |   21 ++++++++++++++++++++-
 target-alpha/cpu.h       |    4 ++++
 target-alpha/helper.h    |    4 ++++
 target-alpha/op_helper.c |   15 +++++++++++++++
 target-alpha/translate.c |   14 ++++++++++++++
 5 files changed, 57 insertions(+), 1 deletions(-)

diff --git a/hw/alpha_typhoon.c b/hw/alpha_typhoon.c
index 3637efc..3d30e0e 100644
--- a/hw/alpha_typhoon.c
+++ b/hw/alpha_typhoon.c
@@ -681,6 +681,16 @@ static void typhoon_set_timer_irq(void *opaque, int irq, int level)
     }
 }
 
+static void typhoon_alarm_timer(void *opaque)
+{
+    TyphoonState *s = (TyphoonState *)((uintptr_t)opaque & ~3);
+    int cpu = (uintptr_t)opaque & 3;
+
+    /* Set the ITI bit for this cpu.  */
+    s->cchip.misc |= 1 << (cpu + 4);
+    cpu_interrupt(s->cchip.cpu[cpu], CPU_INTERRUPT_TIMER);
+}
+
 PCIBus *typhoon_init(ram_addr_t ram_size, qemu_irq *p_rtc_irq,
                      CPUState *cpus[4], pci_map_irq_fn sys_map_irq)
 {
@@ -692,6 +702,7 @@ PCIBus *typhoon_init(ram_addr_t ram_size, qemu_irq *p_rtc_irq,
     PCIHostState *p;
     TyphoonState *s;
     PCIBus *b;
+    int i;
 
     dev = qdev_create(NULL, "typhoon-pcihost");
     qdev_init_nofail(dev);
@@ -700,7 +711,15 @@ PCIBus *typhoon_init(ram_addr_t ram_size, qemu_irq *p_rtc_irq,
     s = container_of(p, TyphoonState, host);
 
     /* Remember the CPUs so that we can deliver interrupts to them.  */
-    memcpy(s->cchip.cpu, cpus, 4 * sizeof(CPUState *));
+    for (i = 0; i < 4; i++) {
+        CPUState *env = cpus[i];
+        s->cchip.cpu[i] = env;
+        if (env) {
+            env->alarm_timer = qemu_new_timer_ns(rtc_clock,
+                                                 typhoon_alarm_timer,
+                                                 (void *)((uintptr_t)s + i));
+        }
+    }
 
     *p_rtc_irq = *qemu_allocate_irqs(typhoon_set_timer_irq, s, 1);
 
diff --git a/target-alpha/cpu.h b/target-alpha/cpu.h
index c2e7bb3..9d61d45 100644
--- a/target-alpha/cpu.h
+++ b/target-alpha/cpu.h
@@ -265,6 +265,10 @@ struct CPUAlphaState {
     uint64_t scratch[24];
 #endif
 
+    /* This alarm doesn't exist in real hardware; we wish it did.  */
+    struct QEMUTimer *alarm_timer;
+    uint64_t alarm_expire;
+
 #if TARGET_LONG_BITS > HOST_LONG_BITS
     /* temporary fixed-point registers
      * used to emulate 64 bits target on 32 bits hosts
diff --git a/target-alpha/helper.h b/target-alpha/helper.h
index c352c24..b693cee 100644
--- a/target-alpha/helper.h
+++ b/target-alpha/helper.h
@@ -113,7 +113,11 @@ DEF_HELPER_2(stq_c_phys, i64, i64, i64)
 
 DEF_HELPER_FLAGS_0(tbia, TCG_CALL_CONST, void)
 DEF_HELPER_FLAGS_1(tbis, TCG_CALL_CONST, void, i64)
+
 DEF_HELPER_1(halt, void, i64);
+
+DEF_HELPER_FLAGS_0(get_time, TCG_CALL_CONST, i64)
+DEF_HELPER_FLAGS_1(set_alarm, TCG_CALL_CONST, void, i64)
 #endif
 
 #include "def-helper.h"
diff --git a/target-alpha/op_helper.c b/target-alpha/op_helper.c
index db5b9e7..6832163 100644
--- a/target-alpha/op_helper.c
+++ b/target-alpha/op_helper.c
@@ -1228,6 +1228,21 @@ void helper_halt(uint64_t restart)
         qemu_system_shutdown_request();
     }
 }
+
+uint64_t helper_get_time(void)
+{
+    return qemu_get_clock_ns(rtc_clock);
+}
+
+void helper_set_alarm(uint64_t expire)
+{
+    if (expire) {
+        env->alarm_expire = expire;
+        qemu_mod_timer(env->alarm_timer, expire);
+    } else {
+        qemu_del_timer(env->alarm_timer);
+    }
+}
 #endif
 
 /*****************************************************************************/
diff --git a/target-alpha/translate.c b/target-alpha/translate.c
index 842f915..37f2f20 100644
--- a/target-alpha/translate.c
+++ b/target-alpha/translate.c
@@ -1590,6 +1590,9 @@ static int cpu_pr_data(int pr)
         return offsetof(CPUAlphaState, shadow[pr - 32]);
     case 40 ... 63:
         return offsetof(CPUAlphaState, scratch[pr - 40]);
+
+    case 251:
+        return offsetof(CPUAlphaState, alarm_expire);
     }
     return 0;
 }
@@ -1604,6 +1607,12 @@ static void gen_mfpr(int ra, int regno)
         return;
     }
 
+    if (regno == 250) {
+        /* WALL_TIME */
+        gen_helper_get_time(cpu_ir[ra]);
+        return;
+    }
+
     /* The basic registers are data only, and unknown registers
        are read-zero, write-ignore.  */
     if (data == 0) {
@@ -1650,6 +1659,11 @@ static ExitStatus gen_mtpr(DisasContext *ctx, int rb, int regno)
         gen_helper_halt(tmp);
         return EXIT_PC_STALE;
 
+    case 251:
+        /* ALARM */
+        gen_helper_set_alarm(tmp);
+        break;
+
     default:
         /* The basic registers are data only, and unknown registers
            are read-zero, write-ignore.  */
-- 
1.7.4.4

  parent reply	other threads:[~2011-08-25 21:46 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-25 21:45 [Qemu-devel] [PULL][PATCH 0/6] Alpha system emulation, v9 Richard Henderson
2011-08-25 21:45 ` [Qemu-devel] [PATCH 1/6] target-alpha: Add custom PALcode image for CLIPPER emulation Richard Henderson
2011-08-26  4:09   ` Peter Maydell
2011-08-25 21:45 ` [Qemu-devel] [PATCH 2/6] target-alpha: Add " Richard Henderson
2011-08-25 21:45 ` [Qemu-devel] [PATCH 3/6] " Richard Henderson
2011-08-25 21:45 ` [Qemu-devel] [PATCH 4/6] target-alpha: Implement WAIT IPR Richard Henderson
2011-08-25 21:45 ` [Qemu-devel] [PATCH 5/6] target-alpha: Implement HALT IPR Richard Henderson
2011-08-25 21:45 ` Richard Henderson [this message]
2011-08-26  3:51   ` [Qemu-devel] [PATCH 6/6] target-alpha: Add high-resolution access to wall clock and an alarm Peter Maydell
2011-08-26  9:07     ` Paolo Bonzini
2011-08-26 16:28       ` Richard Henderson
2011-08-26 16:36         ` Peter Maydell
2011-08-26 20:03           ` Richard Henderson
2011-08-26 20:12           ` Richard Henderson
2011-08-27 16:44           ` Edgar E. Iglesias
2011-08-25 21:59 ` [Qemu-devel] [PULL][PATCH 0/6] Alpha system emulation, v9 Richard Henderson
  -- strict thread matches above, loose matches on Subject: below --
2011-09-22 15:30 [Qemu-devel] [PATCH 0/6] Alpha system emulation, v11 Richard Henderson
2011-09-22 15:30 ` [Qemu-devel] [PATCH 6/6] target-alpha: Add high-resolution access to wall clock and an alarm Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1314308722-14495-7-git-send-email-rth@twiddle.net \
    --to=rth@twiddle.net \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).