From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH] usb-ehci: handle siTDs
Date: Fri, 26 Aug 2011 14:42:41 +0200 [thread overview]
Message-ID: <1314362561-8463-1-git-send-email-kraxel@redhat.com> (raw)
This patch adds code to do minimal siTD handling, which is basically
just following the next pointer. This is good enougth to handle the
inactive siTDs used by FreeBSD. Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/usb-ehci.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
trace-events | 1 +
2 files changed, 43 insertions(+), 1 deletions(-)
diff --git a/hw/usb-ehci.c b/hw/usb-ehci.c
index 136fd16..175eaed 100644
--- a/hw/usb-ehci.c
+++ b/hw/usb-ehci.c
@@ -149,6 +149,7 @@ typedef enum {
EST_FETCHENTRY,
EST_FETCHQH,
EST_FETCHITD,
+ EST_FETCHSITD,
EST_ADVANCEQUEUE,
EST_FETCHQTD,
EST_EXECUTE,
@@ -647,6 +648,13 @@ static void ehci_trace_itd(EHCIState *s, target_phys_addr_t addr, EHCIitd *itd)
get_field(itd->bufptr[0], ITD_BUFPTR_DEVADDR));
}
+static void ehci_trace_sitd(EHCIState *s, target_phys_addr_t addr,
+ EHCIsitd *sitd)
+{
+ trace_usb_ehci_sitd(addr, sitd->next,
+ (bool)(sitd->results & SITD_RESULTS_ACTIVE));
+}
+
/* queue management */
static EHCIQueue *ehci_alloc_queue(EHCIState *ehci, int async)
@@ -1591,8 +1599,13 @@ static int ehci_state_fetchentry(EHCIState *ehci, int async)
again = 1;
break;
+ case NLPTR_TYPE_STITD:
+ ehci_set_state(ehci, async, EST_FETCHSITD);
+ again = 1;
+ break;
+
default:
- // TODO: handle siTD and FSTN types
+ /* TODO: handle FSTN type */
fprintf(stderr, "FETCHENTRY: entry at %X is of type %d "
"which is not supported yet\n", entry, NLPTR_TYPE_GET(entry));
return -1;
@@ -1708,6 +1721,30 @@ static int ehci_state_fetchitd(EHCIState *ehci, int async)
return 1;
}
+static int ehci_state_fetchsitd(EHCIState *ehci, int async)
+{
+ uint32_t entry;
+ EHCIsitd sitd;
+
+ assert(!async);
+ entry = ehci_get_fetch_addr(ehci, async);
+
+ get_dwords(NLPTR_GET(entry), (uint32_t *)&sitd,
+ sizeof(EHCIsitd) >> 2);
+ ehci_trace_sitd(ehci, entry, &sitd);
+
+ if (!(sitd.results & SITD_RESULTS_ACTIVE)) {
+ /* siTD is not active, nothing to do */;
+ } else {
+ /* TODO: split transfers are not implemented */
+ fprintf(stderr, "WARNING: Skipping active siTD\n");
+ }
+
+ ehci_set_fetch_addr(ehci, async, sitd.next);
+ ehci_set_state(ehci, async, EST_FETCHENTRY);
+ return 1;
+}
+
/* Section 4.10.2 - paragraph 3 */
static int ehci_state_advqueue(EHCIQueue *q, int async)
{
@@ -1983,6 +2020,10 @@ static void ehci_advance_state(EHCIState *ehci,
again = ehci_state_fetchitd(ehci, async);
break;
+ case EST_FETCHSITD:
+ again = ehci_state_fetchsitd(ehci, async);
+ break;
+
case EST_ADVANCEQUEUE:
again = ehci_state_advqueue(q, async);
break;
diff --git a/trace-events b/trace-events
index 6fe8f62..6b8b903 100644
--- a/trace-events
+++ b/trace-events
@@ -226,6 +226,7 @@ disable usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext
disable usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d"
disable usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
disable usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
+disable usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ %08x: next %08x - active %d"
disable usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s"
disable usb_ehci_port_detach(uint32_t port) "detach port #%d"
disable usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
--
1.7.1
reply other threads:[~2011-08-26 12:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314362561-8463-1-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).