From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 07/31] block: Split change_cb() into change_media_cb(), resize_cb()
Date: Tue, 6 Sep 2011 17:39:22 +0200 [thread overview]
Message-ID: <1315323586-23840-8-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1315323586-23840-1-git-send-email-kwolf@redhat.com>
From: Markus Armbruster <armbru@redhat.com>
Multiplexing callbacks complicates matters needlessly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 23 +++++++++++++++--------
block.h | 12 +++++++++++-
block_int.h | 3 ---
hw/ide/core.c | 8 ++------
hw/sd.c | 8 ++------
hw/virtio-blk.c | 8 +++-----
6 files changed, 33 insertions(+), 29 deletions(-)
diff --git a/block.c b/block.c
index 00fe345..0aba1bf 100644
--- a/block.c
+++ b/block.c
@@ -44,7 +44,7 @@
#include <windows.h>
#endif
-static void bdrv_dev_change_cb(BlockDriverState *bs, int reason);
+static void bdrv_dev_change_media_cb(BlockDriverState *bs);
static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
@@ -690,7 +690,7 @@ int bdrv_open(BlockDriverState *bs, const char *filename, int flags,
if (!bdrv_key_required(bs)) {
bs->media_changed = 1;
- bdrv_dev_change_cb(bs, CHANGE_MEDIA);
+ bdrv_dev_change_media_cb(bs);
}
return 0;
@@ -727,7 +727,7 @@ void bdrv_close(BlockDriverState *bs)
}
bs->media_changed = 1;
- bdrv_dev_change_cb(bs, CHANGE_MEDIA);
+ bdrv_dev_change_media_cb(bs);
}
}
@@ -806,10 +806,17 @@ void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
bs->dev_opaque = opaque;
}
-static void bdrv_dev_change_cb(BlockDriverState *bs, int reason)
+static void bdrv_dev_change_media_cb(BlockDriverState *bs)
{
- if (bs->dev_ops && bs->dev_ops->change_cb) {
- bs->dev_ops->change_cb(bs->dev_opaque, reason);
+ if (bs->dev_ops && bs->dev_ops->change_media_cb) {
+ bs->dev_ops->change_media_cb(bs->dev_opaque);
+ }
+}
+
+static void bdrv_dev_resize_cb(BlockDriverState *bs)
+{
+ if (bs->dev_ops && bs->dev_ops->resize_cb) {
+ bs->dev_ops->resize_cb(bs->dev_opaque);
}
}
@@ -1283,7 +1290,7 @@ int bdrv_truncate(BlockDriverState *bs, int64_t offset)
ret = drv->bdrv_truncate(bs, offset);
if (ret == 0) {
ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
- bdrv_dev_change_cb(bs, CHANGE_SIZE);
+ bdrv_dev_resize_cb(bs);
}
return ret;
}
@@ -1659,7 +1666,7 @@ int bdrv_set_key(BlockDriverState *bs, const char *key)
bs->valid_key = 1;
/* call the change callback now, we skipped it on open */
bs->media_changed = 1;
- bdrv_dev_change_cb(bs, CHANGE_MEDIA);
+ bdrv_dev_change_media_cb(bs);
}
return ret;
}
diff --git a/block.h b/block.h
index a72cfc9..7e3f587 100644
--- a/block.h
+++ b/block.h
@@ -28,8 +28,18 @@ typedef struct QEMUSnapshotInfo {
uint64_t vm_clock_nsec; /* VM clock relative to boot */
} QEMUSnapshotInfo;
+/* Callbacks for block device models */
typedef struct BlockDevOps {
- void (*change_cb)(void *opaque, int reason);
+ /*
+ * Runs when virtual media changed (monitor commands eject, change)
+ * Beware: doesn't run when a host device's physical media
+ * changes. Sure would be useful if it did.
+ */
+ void (*change_media_cb)(void *opaque);
+ /*
+ * Runs when the size changed (e.g. monitor command block_resize)
+ */
+ void (*resize_cb)(void *opaque);
} BlockDevOps;
#define BDRV_O_RDWR 0x0002
diff --git a/block_int.h b/block_int.h
index ab31dc9..19ae75e 100644
--- a/block_int.h
+++ b/block_int.h
@@ -211,9 +211,6 @@ struct BlockDriverState {
void *private;
};
-#define CHANGE_MEDIA 0x01
-#define CHANGE_SIZE 0x02
-
struct BlockDriverAIOCB {
AIOPool *pool;
BlockDriverState *bs;
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 26a9c5b..47a706e 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -783,15 +783,11 @@ static void ide_cfata_metadata_write(IDEState *s)
}
/* called when the inserted state of the media has changed */
-static void cdrom_change_cb(void *opaque, int reason)
+static void ide_cd_change_cb(void *opaque)
{
IDEState *s = opaque;
uint64_t nb_sectors;
- if (!(reason & CHANGE_MEDIA)) {
- return;
- }
-
bdrv_get_geometry(s->bs, &nb_sectors);
s->nb_sectors = nb_sectors;
@@ -1743,7 +1739,7 @@ void ide_bus_reset(IDEBus *bus)
}
static const BlockDevOps ide_cd_block_ops = {
- .change_cb = cdrom_change_cb,
+ .change_media_cb = ide_cd_change_cb,
};
int ide_init_drive(IDEState *s, BlockDriverState *bs, IDEDriveKind kind,
diff --git a/hw/sd.c b/hw/sd.c
index 1f00910..45e95f9 100644
--- a/hw/sd.c
+++ b/hw/sd.c
@@ -420,14 +420,10 @@ static void sd_reset(SDState *sd, BlockDriverState *bdrv)
sd->pwd_len = 0;
}
-static void sd_cardchange(void *opaque, int reason)
+static void sd_cardchange(void *opaque)
{
SDState *sd = opaque;
- if (!(reason & CHANGE_MEDIA)) {
- return;
- }
-
qemu_set_irq(sd->inserted_cb, bdrv_is_inserted(sd->bdrv));
if (bdrv_is_inserted(sd->bdrv)) {
sd_reset(sd, sd->bdrv);
@@ -436,7 +432,7 @@ static void sd_cardchange(void *opaque, int reason)
}
static const BlockDevOps sd_block_ops = {
- .change_cb = sd_cardchange,
+ .change_media_cb = sd_cardchange,
};
/* We do not model the chip select pin, so allow the board to select
diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
index c10afa9..4df23f4 100644
--- a/hw/virtio-blk.c
+++ b/hw/virtio-blk.c
@@ -543,17 +543,15 @@ static int virtio_blk_load(QEMUFile *f, void *opaque, int version_id)
return 0;
}
-static void virtio_blk_change_cb(void *opaque, int reason)
+static void virtio_blk_resize(void *opaque)
{
VirtIOBlock *s = opaque;
- if (reason & CHANGE_SIZE) {
- virtio_notify_config(&s->vdev);
- }
+ virtio_notify_config(&s->vdev);
}
static const BlockDevOps virtio_block_ops = {
- .change_cb = virtio_blk_change_cb,
+ .resize_cb = virtio_blk_resize,
};
VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf,
--
1.7.6
next prev parent reply other threads:[~2011-09-06 15:37 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-06 15:39 [Qemu-devel] [PULL 00/31] Block patches Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 01/31] linux aio: some comments Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 02/31] qcow2: Properly initialise QcowL2Meta Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 03/31] qcow2: Fix error cases to run depedent requests Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 04/31] async: Allow nested qemu_bh_poll calls Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 05/31] block: Attach non-qdev devices as well Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 06/31] block: Generalize change_cb() to BlockDevOps Kevin Wolf
2011-09-06 15:39 ` Kevin Wolf [this message]
2011-09-06 15:39 ` [Qemu-devel] [PATCH 08/31] ide: Update command code definitions as per ACS-2 Table B.2 Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 09/31] ide: Clean up case label indentation in ide_exec_cmd() Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 10/31] ide: Give vmstate structs internal linkage where possible Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 11/31] block/raw: Fix to forward method bdrv_media_changed() Kevin Wolf
2011-09-07 19:25 ` Blue Swirl
2011-09-08 7:40 ` Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 12/31] block: Leave tracking media change to device models Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 13/31] fdc: Make media change detection more robust Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 14/31] block: Clean up bdrv_flush_all() Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 15/31] savevm: Include writable devices with removable media Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 16/31] xen: Clean up pci_piix3_xen_ide_unplug()'s test for "not a CD" Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 17/31] spitz tosa: Simplify "drive is suitable for microdrive" test Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 18/31] block: Declare qemu_blockalign() in block.h, not block_int.h Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 19/31] VMDK: enable twoGbMaxExtentFlat Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 20/31] VMDK: add twoGbMaxExtentSparse support Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 21/31] VMDK: separate vmdk_read_extent/vmdk_write_extent Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 22/31] VMDK: Opening compressed extent Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 23/31] VMDK: read/write " Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 24/31] VMDK: creating streamOptimized subformat Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 25/31] VMDK: bugfix, open Haiku vmdk image Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 26/31] VMDK: bugfix, opening vSphere 4 exported image Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 27/31] scsi: execute SYNCHRONIZE_CACHE asynchronously Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 28/31] scsi: fix accounting of writes Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 29/31] scsi: refine constants for READ CAPACITY 16 Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 30/31] scsi: fill in additional sense length correctly Kevin Wolf
2011-09-06 15:39 ` [Qemu-devel] [PATCH 31/31] scsi: improve MODE SENSE emulation Kevin Wolf
2011-09-08 14:24 ` [Qemu-devel] [PULL 00/31] Block patches Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315323586-23840-8-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).