[Qemu-devel] [PATCH v3 00/27] Block layer cleanup & fixes

[Markus Armbruster <armbru@redhat.com>]

This patch series looks bigger than it is.  All the patches are small
and hopefully easy to review.

Objectives:

* Push BlockDriverState members locked, tray_open, media_changed into
  device models, where they belong.  Kevin picked the patches pushing
  media_changed from v2, so that part's gone already.

* BlockDriverState member removable is a confusing mess, replace it.

* Improve eject -f.

Also clean up minor messes as they get in the way.

It is based on Kevin's block branch.

Part I: Move tray state to device models
PATCH 01-05 IDE tray open/closed
PATCH 06-07 SCSI tray open/closed
PATCH 08-09 Kill BlockDriverState tray_open
PATCH 10-11 IDE & SCSI track tray lock
PATCH 12-14 Kill BlockDriverState locked
PATCH 15-16 IDE & SCSI tray bug fixes
PATCH 17    IDE migrate tray state

Part II: Miscellaneous
PATCH 18-19 Replace BlockDriverState removable
PATCH 20    Cover tray open/closed in info block
PATCH 21-25 Reduce unclean use of block_int.h
PATCH 26-27 Improve eject -f

Naturally, I want all parts applied.  But I did my best to make
applying only a prefix workable, too.

Review invited from:

* Kevin, Christoph and Amit reviewed previous versions.

* Hannes ACKed the SCSI stuff in v2.

* Luiz reviewed the patches that affect QMP's query-block.  I renamed
  response member "ejected" to "tray-open" since then.

* Paolo commented PATCH 17 `ide/atapi: Preserve tray state on
  migration'.

* Stefano reviewed v1 of PATCH 18 (affects "-drive if=xen").

Testing

* Linux installs from CD to empty disk, then boots fine from disk.

* For both IDE and SCSI:

  - info block reports tray state correctly

  - Guest locking the tray stops eject (without -f) and change

  - eject -f; change works even while tray is locked by guest

  - Reading /dev/sr0 with tray open behaves as before: IDE closes the
    tray and reads (matches bare metal), SCSI reports no medium

  - Tray state is migrated correctly (tested with savevm/loadvm)

* Guest still notices CD media change (IDE only, SCSI doesn't work
  before or after my patches because GESN isn't implemented)

* Migrating ide-cd to older version works when tray is closed and
  unlocked, else fails (tested with savevm/loadvm)


v3:

* Rebased to block branch cfc606da
  - Old PATCH 01-05,25,28-34,40 already there, drop
  - a couple of simple conflicts in hw/scsi-disk.c

* Drop old PATCH v2 27 scsi-disk: Preserve tray state on migration,
  because it doesn't make much sense without working SCSI migration.

* Drop old PATCH v2 22 ide/atapi: Avoid physical/virtual tray state
  mismatch, because it has a bug, how to best fix it isn't obvious,
  and it's not essential to this series.  Drop related PATCH v2 20,24,
  too.  I plan to revisit them later.

* Clean up `ide: Use a table to declare which drive kinds accept each
  command' a bit (Blue & Kevin)

* Hannes's advice:
  - Rename some SCSISense variables

* Kevin's advice:
  - Add comments to explain MMC-5 jargon loej
  - Make bdrv_lock_medium() parameter locked bool.

v2:

* Rebased to block branch; non-trivial conflicts:
  - Old PATCH 01-02,06-09 already there, drop
  - `block: Attach non-qdev devices as well':
    - cover new pci_piix3_xen_ide_unplug()
    - hw/nand has been qdefivied, drop hunk
    - onenand_init() changed, rewrite hunk
  - pci_piix3_xen_ide_unplug() needs new PATCH 33.

* Drop old PATCH 18 `scsi-disk: Reject CD-specific SCSI commands to
  disks' because Hannes wants to do it differently, and it's not
  essential to this series.

* Christoph's advice:
  - Rework `ide: Update command code definitions as per ACS-2'
  - Add comment to `ide: Fix ATA command READ to set ATAPI signature
    for CD-ROM'
  - Squash `ide/atapi: Track tray open/close state' and `ide/atapi:
    Switch from BlockDriverState's tray_open to own'
  - Squash `ide/atapi: Track tray locked state' and `ide/atapi: Switch
    from BlockDriverState's locked to own tray_locked'
  - Squash `scsi-disk: Track tray locked state' and `scsi-disk: Switch
    from BlockDriverState's locked to own tray_locked'
  - Drop `block: Move BlockDriverAIOCB & friends from block_int.h to
    block.h'

* Luiz's advice:
  - Change query-block to always include "ejected" for removable
    devices.  Requires moving `block: Show whether the guest ejected
    the medium in info block', which causes a bunch of conflicts.

* A few cosmetic improvements


Markus Armbruster (27):
  ide: Fix ATA command READ to set ATAPI signature for CD-ROM
  ide: Use a table to declare which drive kinds accept each command
  ide: Reject ATA commands specific to drive kinds
  ide/atapi: Clean up misleading name in cmd_start_stop_unit()
  ide/atapi: Track tray open/close state
  scsi-disk: Factor out scsi_disk_emulate_start_stop()
  scsi-disk: Track tray open/close state
  block: Revert entanglement of bdrv_is_inserted() with tray status
  block: Drop tray status tracking, no longer used
  ide/atapi: Track tray locked state
  scsi-disk: Track tray locked state
  block: Leave enforcing tray lock to device models
  block: Drop medium lock tracking, ask device models instead
  block: Rename bdrv_set_locked() to bdrv_lock_medium()
  ide/atapi: Don't fail eject when tray is already open
  scsi-disk: Fix START_STOP to fail when it can't eject
  ide/atapi: Preserve tray state on migration
  block: Clean up remaining users of "removable"
  block: Drop BlockDriverState member removable
  block: Show whether the virtual tray is open in info block
  block: Move BlockConf & friends from block_int.h to block.h
  hw: Trim superfluous #include "block_int.h"
  block: New bdrv_set_buffer_alignment()
  block: Reset buffer alignment on detach
  nbd: Clean up use of block_int.h
  block: New change_media_cb() parameter load
  ide/atapi scsi-disk: Make monitor eject -f, then change work

 block.c             |  104 ++++++++++++++++++---------------
 block.h             |   63 ++++++++++++++++++--
 block/nbd.c         |    1 +
 block/raw-posix.c   |    8 +-
 block/raw.c         |    6 +-
 block_int.h         |   40 +------------
 blockdev.c          |   10 +--
 hw/fdc.c            |    4 +-
 hw/ide/atapi.c      |   58 +++++++++----------
 hw/ide/cmd646.c     |    1 -
 hw/ide/core.c       |  160 +++++++++++++++++++++++++++++++++++++++++---------
 hw/ide/ich.c        |    1 -
 hw/ide/internal.h   |    3 +-
 hw/ide/isa.c        |    1 -
 hw/ide/macio.c      |    1 -
 hw/ide/microdrive.c |    1 -
 hw/ide/mmio.c       |    1 -
 hw/ide/pci.c        |    1 -
 hw/ide/via.c        |    1 -
 hw/lsi53c895a.c     |    1 -
 hw/scsi-bus.c       |   10 +++
 hw/scsi-disk.c      |   69 +++++++++++++++++++---
 hw/scsi-generic.c   |    1 -
 hw/scsi.h           |    5 +-
 hw/sd.c             |    2 +-
 hw/virtio-blk.c     |    3 +-
 hw/virtio.h         |    2 +-
 nbd.c               |    1 +
 nbd.h               |    2 -
 qmp-commands.hx     |    2 +
 trace-events        |    1 +
 31 files changed, 367 insertions(+), 197 deletions(-)

-- 
1.7.6