From: Avi Kivity <avi@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 00/28] Memory API conversion, batch 7
Date: Mon, 12 Sep 2011 13:50:38 +0300 [thread overview]
Message-ID: <1315824666-4214-1-git-send-email-avi@redhat.com> (raw)
git://github.com/avikivity/qemu.git memory/batch
More of the same. I tested what I could using the images on the qemu wiki -
note not all images boot even on upstream.
Avi Kivity (9):
mips_jazz: convert to memory API
mips_malta: convert to memory API
mips_mipssim: convert to memory API
mips_r4k: convert to memory API
musicpal: convert to memory API
omap1: convert to memory API (part I)
omap1: convert to memory API (part II)
mips_malta: move i8259 initialization after piix4 initialization
pci: simplify memory region registration
Edgar E. Iglesias (5):
etrax-pic: Convert to MemoryRegion
etrax-ser: Convert to MemoryRegion
etrax-timer: Convert to MemoryRegion
etrax-dma: Convert to MemoryRegion
etrax-eth: Convert to MemoryRegion
Richard Henderson (14):
pci: add pci_address_space_io()
isa: Pass i/o address space to isa_bus_new
isa: add isa_register_ioport()
pc: Re-order pc_init1 to initialize the ISA bus before ISA devices
cs4231a: Convert to MemoryRegion
i8254: Convert to MemoryRegion
i8259: Convert to MemoryRegion
pckbd: Convert to MemoryRegion
serial: Convert serial_isa_initfn to MemoryRegion
fdc: Convert isabus_fdc_init1 to MemoryRegion
serial: Convert serial_mm_init to MemoryRegion
serial: Use enum device_endian in serial_mm_init parameter
serial: Remove ioregister parameter from serial_mm_init
serial: Add MemoryRegion parameter to serial_mm_init
hw/cs4231a.c | 38 ++--
hw/etraxfs_dma.c | 43 +++--
hw/etraxfs_eth.c | 30 ++--
hw/etraxfs_pic.c | 30 ++--
hw/etraxfs_ser.c | 33 ++--
hw/etraxfs_timer.c | 31 ++--
hw/fdc.c | 53 +++--
hw/i8254.c | 16 ++-
hw/i8259.c | 65 ++++--
hw/isa-bus.c | 14 ++-
hw/isa.h | 7 +-
hw/mips_jazz.c | 119 +++++-----
hw/mips_malta.c | 69 +++---
hw/mips_mipssim.c | 15 +-
hw/mips_r4k.c | 41 ++---
hw/musicpal.c | 261 +++++++++--------------
hw/omap.h | 18 ++-
hw/omap1.c | 533 +++++++++++++++++++++++++---------------------
hw/omap_sx1.c | 4 +-
hw/omap_uart.c | 27 +--
hw/palm.c | 4 +-
hw/pc.h | 10 +-
hw/pc_piix.c | 24 ++-
hw/pci.c | 18 +-
hw/pci.h | 1 +
hw/pckbd.c | 59 +++--
hw/petalogix_ml605_mmu.c | 6 +-
hw/piix4.c | 2 +-
hw/piix_pci.c | 2 +-
hw/ppc405_uc.c | 20 +-
hw/ppc440.c | 11 +-
hw/ppc_prep.c | 2 +-
hw/ppce500_mpc8544ds.c | 10 +-
hw/pxa2xx.c | 38 ++--
hw/serial.c | 162 ++++-----------
hw/sm501.c | 12 +-
hw/sun4u.c | 7 +-
hw/virtex_ml507.c | 5 +-
hw/vt82c686.c | 2 +-
39 files changed, 927 insertions(+), 915 deletions(-)
--
1.7.6.1
next reply other threads:[~2011-09-12 10:51 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-12 10:50 Avi Kivity [this message]
2011-09-12 10:50 ` [Qemu-devel] [PULL 01/28] mips_jazz: convert to memory API Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 02/28] mips_malta: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 03/28] mips_mipssim: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 04/28] mips_r4k: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 05/28] musicpal: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 06/28] omap1: convert to memory API (part I) Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 07/28] omap1: convert to memory API (part II) Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 08/28] pci: add pci_address_space_io() Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 09/28] isa: Pass i/o address space to isa_bus_new Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 10/28] isa: add isa_register_ioport() Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 11/28] pc: Re-order pc_init1 to initialize the ISA bus before ISA devices Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 12/28] cs4231a: Convert to MemoryRegion Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 13/28] i8254: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 14/28] mips_malta: move i8259 initialization after piix4 initialization Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 15/28] i8259: Convert to MemoryRegion Avi Kivity
2011-09-12 12:54 ` Jan Kiszka
2011-09-12 13:30 ` Jan Kiszka
2011-09-12 10:50 ` [Qemu-devel] [PULL 16/28] pckbd: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 17/28] serial: Convert serial_isa_initfn " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 18/28] fdc: Convert isabus_fdc_init1 " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 19/28] pci: simplify memory region registration Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 20/28] etrax-pic: Convert to MemoryRegion Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 21/28] etrax-ser: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 22/28] etrax-timer: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 23/28] etrax-dma: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 24/28] etrax-eth: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 25/28] serial: Convert serial_mm_init " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 26/28] serial: Use enum device_endian in serial_mm_init parameter Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 27/28] serial: Remove ioregister parameter from serial_mm_init Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 28/28] serial: Add MemoryRegion parameter to serial_mm_init Avi Kivity
2011-09-12 12:29 ` [Qemu-devel] [PULL 00/28] Memory API conversion, batch 7 Avi Kivity
2011-09-12 12:57 ` Anthony Liguori
2011-09-12 13:04 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315824666-4214-1-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).