From: Avi Kivity <avi@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 22/28] etrax-timer: Convert to MemoryRegion
Date: Mon, 12 Sep 2011 13:51:00 +0300 [thread overview]
Message-ID: <1315824666-4214-23-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1315824666-4214-1-git-send-email-avi@redhat.com>
From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
hw/etraxfs_timer.c | 31 ++++++++++++++++---------------
1 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/hw/etraxfs_timer.c b/hw/etraxfs_timer.c
index b08e574..57dc739 100644
--- a/hw/etraxfs_timer.c
+++ b/hw/etraxfs_timer.c
@@ -43,6 +43,7 @@
struct etrax_timer {
SysBusDevice busdev;
+ MemoryRegion mmio;
qemu_irq irq;
qemu_irq nmi;
@@ -72,7 +73,8 @@ struct etrax_timer {
uint32_t r_masked_intr;
};
-static uint32_t timer_readl (void *opaque, target_phys_addr_t addr)
+static uint64_t
+timer_read(void *opaque, target_phys_addr_t addr, unsigned int size)
{
struct etrax_timer *t = opaque;
uint32_t r = 0;
@@ -239,9 +241,11 @@ static inline void timer_watchdog_update(struct etrax_timer *t, uint32_t value)
}
static void
-timer_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
+timer_write(void *opaque, target_phys_addr_t addr,
+ uint64_t val64, unsigned int size)
{
struct etrax_timer *t = opaque;
+ uint32_t value = val64;
switch (addr)
{
@@ -281,14 +285,14 @@ static inline void timer_watchdog_update(struct etrax_timer *t, uint32_t value)
}
}
-static CPUReadMemoryFunc * const timer_read[] = {
- NULL, NULL,
- &timer_readl,
-};
-
-static CPUWriteMemoryFunc * const timer_write[] = {
- NULL, NULL,
- &timer_writel,
+static const MemoryRegionOps timer_ops = {
+ .read = timer_read,
+ .write = timer_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4
+ }
};
static void etraxfs_timer_reset(void *opaque)
@@ -307,7 +311,6 @@ static void etraxfs_timer_reset(void *opaque)
static int etraxfs_timer_init(SysBusDevice *dev)
{
struct etrax_timer *t = FROM_SYSBUS(typeof (*t), dev);
- int timer_regs;
t->bh_t0 = qemu_bh_new(timer0_hit, t);
t->bh_t1 = qemu_bh_new(timer1_hit, t);
@@ -319,10 +322,8 @@ static int etraxfs_timer_init(SysBusDevice *dev)
sysbus_init_irq(dev, &t->irq);
sysbus_init_irq(dev, &t->nmi);
- timer_regs = cpu_register_io_memory(timer_read, timer_write, t,
- DEVICE_NATIVE_ENDIAN);
- sysbus_init_mmio(dev, 0x5c, timer_regs);
-
+ memory_region_init_io(&t->mmio, &timer_ops, t, "etraxfs-timer", 0x5c);
+ sysbus_init_mmio_region(dev, &t->mmio);
qemu_register_reset(etraxfs_timer_reset, t);
return 0;
}
--
1.7.6.1
next prev parent reply other threads:[~2011-09-12 10:51 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-12 10:50 [Qemu-devel] [PULL 00/28] Memory API conversion, batch 7 Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 01/28] mips_jazz: convert to memory API Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 02/28] mips_malta: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 03/28] mips_mipssim: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 04/28] mips_r4k: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 05/28] musicpal: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 06/28] omap1: convert to memory API (part I) Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 07/28] omap1: convert to memory API (part II) Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 08/28] pci: add pci_address_space_io() Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 09/28] isa: Pass i/o address space to isa_bus_new Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 10/28] isa: add isa_register_ioport() Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 11/28] pc: Re-order pc_init1 to initialize the ISA bus before ISA devices Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 12/28] cs4231a: Convert to MemoryRegion Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 13/28] i8254: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 14/28] mips_malta: move i8259 initialization after piix4 initialization Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 15/28] i8259: Convert to MemoryRegion Avi Kivity
2011-09-12 12:54 ` Jan Kiszka
2011-09-12 13:30 ` Jan Kiszka
2011-09-12 10:50 ` [Qemu-devel] [PULL 16/28] pckbd: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 17/28] serial: Convert serial_isa_initfn " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 18/28] fdc: Convert isabus_fdc_init1 " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 19/28] pci: simplify memory region registration Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 20/28] etrax-pic: Convert to MemoryRegion Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 21/28] etrax-ser: " Avi Kivity
2011-09-12 10:51 ` Avi Kivity [this message]
2011-09-12 10:51 ` [Qemu-devel] [PULL 23/28] etrax-dma: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 24/28] etrax-eth: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 25/28] serial: Convert serial_mm_init " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 26/28] serial: Use enum device_endian in serial_mm_init parameter Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 27/28] serial: Remove ioregister parameter from serial_mm_init Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 28/28] serial: Add MemoryRegion parameter to serial_mm_init Avi Kivity
2011-09-12 12:29 ` [Qemu-devel] [PULL 00/28] Memory API conversion, batch 7 Avi Kivity
2011-09-12 12:57 ` Anthony Liguori
2011-09-12 13:04 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315824666-4214-23-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).